Traxxas Titan 550 Size Motor (12T) – Part #3785🔥 Big Power. Bold Performance. The Traxxas Titan 12T 550 Brushed Motor delivers massive torque and reliable performance for your RC adventures. Whether you're tearing up trails or bashing in the backyard, this motor is built to handle the heat—literally—with an integrated cooling fan that helps extend run times and reduce wear. A perfect drop-in replacement for Traxxas models using a 12-turn brushed motor. ✅ High-torque 550 size brushed motor✅ 12-turn design for powerful acceleration✅ Built-in cooling fan for longer run times✅ Factory-installed leads for easy installation✅ Ideal replacement for many Traxxas 1/10 scale vehicles 📦 Includes: (1) Titan 550 12T Brushed Motor 💡 Pro Tip: For best results, pair with the Traxxas XL-5 ESC and a properly geared transmission to balance speed and runtime.  

Read more less

Reedy Blackbox 610R 2S Competition ESC – ASC27016Unleash precision, power, and full control with the Reedy Blackbox 610R — Reedy’s most advanced 1/10 scale ESC yet. Built on the trusted legacy of the 510R, the 610R pushes the limits with updated 32-bit hardware, lightning-fast throttle response, and unmatched tuning capability. Whether you're running stock or modified 1/10 scale setups, this ESC delivers championship-winning performance in both on-road and off-road racing. Pair it with the optional Blackbox PROgrammer2 (not included) to unlock full customization and data logging. 🔧 Key Features: CNC-machined black aluminum case with integrated heat sink Fully adjustable brake, throttle, power, and safety functions Blinky mode with ROAR-approved software 32-bit MCU for ultra-fast response Precision throttle & brake control Ultra-low resistance FET board On-board power button Optional external fan ready Pro external capacitor board Firmware updateable (with PROgrammer2) 🧠 Advanced Tuning (with Blackbox PROgrammer2 – ASC27027): Brake Settings: Strength, frequency, drag brake, punch, dynamic drag Throttle Control: Drive frequency, current limit, punch, deadband Power Delivery: Boost and top speed timing, standard & expert modes Misc. Settings: BEC voltage, temp cutoff, rotation direction, mode switching Note: Requires firmware version EE460139 on the Programmer. Already installed if purchased as the 610R/Programmer combo (ASC27017). 📦 Specs: Voltage Input: 2S LiPo Suggested Use: 1/10 Off-Road & On-Road Resistance: 0.00043 ohms Continuous Current: 160A Motor Limit: 4.5T Dimensions: 38.5 x 36.9 x 19.5mm Weight (no wires/fan): 45g BEC Output: 6.0–7.4V / 5A Power Wires: 13-gauge silicone Fan: Optional (not included)

Read more less

Unleash extreme torque with the Titan 550 Reverse Rotation Motor from Traxxas — the ultimate upgrade for your TRX-4. This 21-turn powerhouse features a 30% longer armature than standard 540 motors, delivering monster torque and rugged trail performance. Built with an integrated fan for cooler running and longer motor life, this motor is ready to crawl, climb, and conquer. 🔥 21-turn / 14.4V Reverse Rotation🔥 550-size can for maximum torque🔥 30% longer armature = more power🔥 Integrated cooling fan for extended durability Compatible with: Traxxas TRX-4 Traxxas models requiring reverse rotation 550 motors Part #: 3975R Built to handle the toughest trails — torque, traction, and temperature under control. This is Titan power.  

Read more less

Reedy Sonic 540-SP5 Spec Brushless Motor (17.5T) – The Ultimate Stock Racing Motor! Engineered for maximum torque, power, and efficiency, the Reedy Sonic 540-SP5 Spec Brushless Motor (17.5T) is designed to dominate stock-class competition. Featuring an all-new in-house developed stator, high-strength balanced rotor, and precision CNC-machined aluminum housing, this motor delivers unparalleled throttle response and fade-free power. Whether you're looking for high RPMs, reliable torque, or advanced tuning capabilities, the SP5's cutting-edge technology and ROAR-legal design make it the perfect choice for competitive racers seeking top-tier performance. Key Features: ✅ CNC-Machined Aluminum Housing – Lightweight and optimized for superior cooling.✅ Custom High-Power Stator Design – Maximizes torque and power output without sacrificing RPM.✅ Low-Resistance Solder Tabs & Oversized Collector Ring – Reduces resistance and heat buildup for consistent power delivery.✅ Balanced Rotor with High-Strength Magnet – Delivers smooth, fade-free performance under extreme loads.✅ Dual Precision Ball Bearings – Ensures exceptional efficiency and reliability at high RPMs.✅ Aluminum End Cap with Adjustable Timing – Fine-tune performance for specific applications.✅ Completely Rebuildable – Maintain peak performance with replaceable components.✅ Competition Proven & ROAR Approved – Legal for sanctioned stock racing events. Precision Engineering for Maximum Performance! 🏁 Why Choose the Reedy Sonic 540-SP5? Heat-transfer epoxy-treated copper magnet wire ensures low resistance and high durability. Oversized collector ring and thick solder tabs minimize power loss and enhance efficiency. Lightweight design improves chassis handling, offering greater tuning flexibility. Optimized for 1-2S LiPo racing applications, making it the go-to choice for spec-class racers. 🔥 Push your limits with the Reedy Sonic 540-SP5 and experience race-winning performance! Specifications: Cells: 1-2S LiPo Diameter: 35.9mm Length: 52.5mm Shaft Diameter: 3.15mm Weight: 147-151g In the Box: (1) Reedy Sonic 540-SP5 Spec Brushless Motor (17.5T) Race-Proven Power & Precision – Built for Champions! The Reedy Sonic 540-SP5 17.5T is engineered for stock-class dominance, offering unmatched torque, responsiveness, and durability. With its high-efficiency stator, ultra-low resistance components, and precision-balanced rotor, this motor delivers the speed, control, and reliability needed to take the podium. 🔥 Upgrade today and experience race-winning power with the Sonic 540-SP5! 🏁💨

Read more less

Furitek SCORPION PRO 5600kV Sensored Brushless Combo🔥 For Grom & NASCAR – Next-Level Power and Control 🔥 Designed for 1/18 scale platforms like the Arrma Grom and Losi NASCAR, the Furitek SCORPION PRO delivers elite brushless performance in a compact, easy-to-install system. Featuring sensored motor tech, built-in wireless programming, and waterproof durability, this ESC and motor combo is ready to dominate. 🏁 Why SCORPION PRO? Sensored 4-Pole Power: Precise, ultra-smooth throttle response Wireless Tuning: Adjust ESC settings via the Furicar App (iOS/Android) Compact & Lightweight: Designed specifically for 1/18 platforms Waterproof Design: All-weather ready for trail or track Plug & Play Fit: Drop-in upgrade for Arrma Grom and Losi NASCAR 📱 App-Controlled ConvenienceTweak throttle, braking, and more – live and on the go – no cables required. Get real-time telemetry and updates wirelessly. ⚙️ Specs (ESC): Continuous Current: 60A Burst Current: 100A Voltage: 2S LiPo BEC: 5.5V–7.4V @ 5A Programming: Furicar App Connectors: EC2 battery, 3-pin motor Weight: 0.705oz (20g) ⚙️ Specs (Motor): KV Rating: 5600kV Voltage: 2S LiPo Output: 450W Size: 28x35mm Shaft: 2mm x 12mm Weight: 2.11oz (60g) 📦 Includes: (1) SCORPION PRO Waterproof ESC w/ Wireless Module (1) 5600Kv IMPULSE Brushless Sensored Motor w/19T 0.5M Pinion (1) Sensored Cable (1) Signal Cable (1) User Manual 💡 Unmatched torque. Real-time tuning. Built for serious racers and hobbyists. Get the most out of your mini RC with Furitek's most advanced system yet.

Read more less

Replacement 23-turn brushed motor for LaTrax® vehicles. Restore your LaTrax® vehicle’s performance with the Traxxas 7575R 370-Size Brushed Motor. This 23-turn motor is designed as a direct replacement and includes pre-installed bullet connectors for quick and easy installation. 🔧 Features: 23-turn brushed design 370-size motor Pre-wired with bullet connectors Delivers smooth and reliable power Genuine Traxxas® replacement part 💥 Compatibility: LaTrax® Teton® LaTrax® Rally LaTrax® Desert Prerunner Perfect for keeping your LaTrax® vehicle running strong with factory-spec performance!

Read more less

Team Exalt Phoenix 13.5T Gold Spec Brushless Motor – Offroad Carpet Version📦 Part #: EXA01135GSC Engineered for dominance on high-grip surfaces, the Phoenix 13.5T Gold Spec is the pinnacle of Team Exalt’s brushless motor line. Purpose-built for competitive offroad carpet racing, this motor is hand-built, precision-tuned, and Motolyser-verified to deliver maximum efficiency, speed, and consistency. 🏆 Gold Spec / Specialized Version Highlights: 💎 Top % Stator & Rotor from production batch 🧲 Sensor Deviation Guaranteed ≤ 1.0° ⚙️ Grade 10 Ceramic Bearings (metal shielded) 📊 Motolyser Tuned & Printout Included ✅ Sealed with Team Exalt Gold Spec Certification 🛠️ Technical Features: Designed for 1/10 Scale Offroad Carpet Racing CNC-machined 7075 Aluminum Two-Piece Can 90° Solder Tabs for cleaner and more secure wiring Infinite Timing Adjustability for race-specific tuning Thermal Epoxy-Filled Stator enhances heat dissipation Ultra-Rare Earth Magnet Formula resists heat and maintains magnetic strength under stress EXAS2305 Rotor installed Replaceable Sensor Board High Purity Copper Windings High-Heat-Resistant Materials throughout construction Rebuildable Design to extend motor life ROAR Approved for sanctioned events 📦 Includes: (1) Phoenix 13.5T Gold Spec Motor (EXA01135GSC) (1) Motolyser Printout Sheet Gold Spec Seal (Factory Installed) 🔧 Application-Specific Tuning:Gold Spec motors are built and tuned based on intended use—factoring in size, surface type, and climate. Minor final adjustments may still be needed to fine-tune performance for your exact conditions. 🔥 Whether you're club racing or chasing the podium at nationals, the Phoenix Gold Spec delivers world-class performance right out of the box.

Read more less

Overview:The Arrma 550 14T Brushed Motor is a powerful and reliable replacement motor designed for Arrma 1/10 scale brushed vehicles. Built with durability in mind, this motor delivers consistent torque and smooth acceleration, making it ideal for both beginners and backyard bashers. Its rugged construction ensures long-lasting performance, even under demanding conditions. Features: 550-size 14-turn brushed motor Provides reliable torque and smooth throttle response Durable design built for bashing and off-road fun Black can finish with Arrma logo for a clean look Genuine Arrma replacement part Compatibility: Direct replacement for select Arrma 1/10 4x4 brushed models, including: Granite 4x4 MEGA Senton 4x4 MEGA Big Rock 4x4 MEGA Typhon 4x4 MEGA May also be compatible with other vehicles using a 550-size brushed motor (check manual) Includes: (1) Arrma 550 14T Brushed Motor (Black) Part Number: ARA390307 ⚡ Pro Tip: Pair this motor with a fresh pinion gear and properly geared ESC setup to maximize runtime and keep temps under control.

Read more less

This Hobbywing 10BL60 G2 ESC (rebranded for LC Racing) delivers reliable sensored performance in a plug-and-play format—perfect for 1/10 scale on-road and off-road vehicles. Compact and powerful, it’s a great fit for RTR upgrades or custom builds that demand precision and punch. 🔧 Key Features: 60A Sensored ESC – Smooth throttle control with consistent power delivery Includes Cooling Fan – Actively keeps temperatures low under heavy load Plug & Play Ready – Pre-installed T plug (Deans) and 3.5mm bullet connectors for the motor Wide Compatibility – Suitable for 2S–3S LiPo and 5–9 cell NiMH setups Perfect Match – Ideal for 540-sized sensored brushless motors 📦 Includes: (1) Hobbywing 10BL60 G2 Sensored 60A ESC w/ T-Plug (1) Cooling fan pre-installed (3) 3.5mm bullet connectors (motor leads) 🚫 Sensor wire not included – sold separately

Read more less

Take your micro RC vehicle to the next level with the LC Racing 5150kV Sensored Brushless Motor. Engineered for efficiency and performance, this motor delivers smooth throttle response, optimal low-speed control, and high-RPM power—all in a compact, durable design. 💥 Key Features: Sensored Design: Smooth, precise throttle control—ideal for technical courses and racing. High Output: 5150kV rating for aggressive power delivery and performance. Precision Shaft: 3.175mm motor shaft fits most 1/14–1/16 scale applications. Efficient & Reliable: Built to handle the demands of competitive driving. Compatible with LC Racing vehicles and many other micro scale models. 📦 Includes:  • (1) LC Racing 2840 5150kV Sensored Brushless Motor **No Sensor wire included  

Read more less

LC Racing Sensored Brushless Motor – 4900kV (3.175mm Shaft)Part #: LCE015 Designed for precision and speed, the LC Racing 4900kV Sensored Brushless Motor is a perfect upgrade for high-performance micro RC setups. With sensored operation and a compact 2840-size can, this motor delivers consistent power and smooth low-end control—ideal for both racing and crawling. 💥 Key Features: 4900kV Output: Balanced power ideal for lightweight 1/14–1/16 scale RC platforms Sensored Design: Provides ultra-smooth throttle response for low-speed control and high-speed bursts 3.175mm Shaft: Standard compatibility for most micro-scale vehicles No Sensor Wire Included: Add your own 6-pin sensor cable to complete the setup Efficient & Durable: High-performance internals built for long-lasting reliability 📦 Includes: (1) LC Racing 2840 4900kV Sensored Brushless Motor (LCE015) **Sensor wire not included

Read more less

⚡ Stock replacement motor for dependable performance. The Traxxas 7075 Titan 380 Brushed Motor (18-Turn) is a direct replacement for select Traxxas models, delivering smooth, consistent power in a compact design. Featuring an internal cooling fan for longer runtimes and improved durability, this motor is built to keep your RC running strong during high-action fun. ✅ Genuine Traxxas replacement part✅ 18-turn design for balanced speed & torque✅ Pre-installed bullet connectors for easy install✅ Integrated cooling fan for extended life 📦 Includes:• (1) Traxxas Titan 380 Brushed Motor (18T) Compatibility: Traxxas 1/16 E-Revo VXL & Brushed Traxxas 1/16 Summit Traxxas 1/16 Slash Traxxas 1/16 Rally

Read more less

Furitek UNITY24 PRO 2-in-1 FOC Brushless System (3500kV)💥 Power + Precision for Your SCX24 💥 The Furitek UNITY24 PRO is a game-changing upgrade for 1/24 and 1/18 scale crawlers like the Axial® SCX24. This all-in-one brushless motor and ESC combo features FOC (Field-Oriented Control) technology for ultra-smooth control, powerful torque, and precision crawling. With built-in wireless programming, a waterproof CNC aluminum case, and smart BEC features, the UNITY24 PRO sets a new standard in micro crawler performance. ✅ Perfect fit for Axial® SCX24 and other micro crawlers✅ CNC-machined waterproof aluminum housing✅ Built-in wireless for easy app-based tuning (Android & iOS)✅ Smooth startup & throttle transitions with FOC tech✅ Adjustable BEC output (5.5V–8.4V)✅ Lifetime firmware updates 📦 Includes: (1) UNITY24 PRO 2-in-1 Motor/ESC System (1) CNC Aluminum Motor Mount (1) Furitek Repeater Wireless Module (1) 11T Pinion Gear 🔧 Specs: Motor: 3500kV Inrunner (12-pole) ESC Current: 30A continuous / 50A peak Voltage: 2S–3S LiPo BEC: 5.5V–8.4V switchable 🚀 Take your SCX24 to the next level with smoother climbs, better low-speed control, and simplified setup. This is the upgrade you've been waiting for.

Read more less

Team Exalt Phoenix Gold Spec Brushless 2S Motor (10.5T)📦 Part #: EXA01105GSC | ROAR Approved The Phoenix Gold Spec 10.5T 2S Motor by Team Exalt is built for drivers who demand the pinnacle of speed, consistency, and craftsmanship. Hand-assembled with top-tier materials and precision-tuned using Motolyser technology, this motor delivers unmatched performance for serious 1/10 scale racing. 🏁 Gold Spec Highlights: Hand-selected top-percentage stator and rotor Sensor deviation ≤1.0° Motolyser-tuned for max output and consistency Grade 10 metal shielded ceramic bearings Sealed with Gold Spec certification for guaranteed performance ⚙️ Key Features: Optimized specifically for 2S LiPo operation New 90° solder tabs for clean, efficient installs Infinite timing adjustment to dial in your setup Durable 7075 CNC-machined aluminum 2-piece can Ultra-rare earth magnets withstand intense heat EXAS2305 rotor included Thermal epoxy-filled stator ensures cool, consistent power Replaceable sensor board and high RPM bearings Fully rebuildable for extended motor life ROAR Approved 📦 Includes: (1) Phoenix Gold Spec Brushless 2S Motor (10.5T) (1) Sensor Cable 🏆 Push the limits of your 2S class with elite-level performance — the Phoenix Gold Spec 10.5T is built to dominate.

Read more less