🔩 BOOF RC 48P Aluminum Pinion Gear (16T–40T) This is a BOOF RC 48 Pitch Lightweight Aluminum Pinion Gear — precision-engineered for off-road applications where quicker motor spool-up and acceleration make all the difference. CNC-machined from aluminum and hard anodized for strength, these gears are built to deliver smooth, consistent power. Gears 16T and larger feature weight-reducing cuts on the back side, maximizing performance without compromising durability. Each gear includes a setscrew for easy installation. 💡 Choose your tooth count from the menu above. ✅ Features: 48 Pitch, perfect for a wide range of off-road vehicles Available in 16T to 40T sizes Lightweight, hard-anodized aluminum construction Machined for precision and durability Reduced rotating mass = faster acceleration Includes setscrew BOOF RC sticker included

Read more less

Traxxas 54T Spur Gear – 0.8 Mod Metric Pitch – Part 3956Factory Fit. Smooth Mesh. Built to Perform. The Traxxas 54-Tooth Spur Gear (3956) is a direct replacement part designed to mount on the transmission input shaft, meshing with your pinion gear to deliver reliable, consistent power transfer in demanding driving conditions. ✅ 54-tooth gear – standard gearing for balanced speed and torque✅ 0.8 Metric Pitch – matches with Mod 0.8 / 32-pitch pinion gears✅ Durable molded construction – designed for long-lasting performance✅ Fits Traxxas vehicles using 0.8MP spur setups✅ Mounts to input shaft, meshes with clutch bell pinion 📦 Includes: (1) 54T Spur Gear (0.8 Metric Pitch) Part #: 3956 💡 Pro Tip: Use threadlock when re-installing your spur gear screws to prevent backing out under vibration.

Read more less

Traxxas 48P Spur Gear (76T)Part #: 4676 This 76-tooth, 48-pitch spur gear is a direct replacement from Traxxas, ideal for dialing in your gearing for optimal performance. Whether you're fine-tuning for acceleration or speed, this gear provides smooth, reliable power transfer. Features: Genuine Traxxas replacement part 48-pitch, 76-tooth gear Perfect for customizing gear ratios Durable molded construction Includes: (1) 76T 48P Spur Gear Note: Ensure pitch compatibility with your pinion gear before installation.  

Read more less

Upgrade your drivetrain with the ProTek RC Hardened Steel 32 Pitch Pinion Gears. Perfect for high-performance 1/10 and 1/8 scale applications, these pinions feature a 5mm bore with a precision-fit reducer sleeve (3.17mm) for versatile use across multiple motor shafts. Built from hardened steel, they’re ready to handle extreme brushless power and heavy loads without stripping. Features: Hardened steel construction for durability and long life 32 Pitch (Mod 0.8) – ideal for high torque and brushless setups 5mm bore with included 3.17mm reducer sleeve for universal fit Laser-etched tooth count for easy identification Available in 11T–20T (PTK-8056 through PTK-8063) Included Sizes & Part Numbers: 11T – PTK-8056 12T – PTK-8057 13T – PTK-8058 14T – PTK-8059 15T – PTK-8060 16T – PTK-8061 17T – PTK-8062 18T – PTK-8063 19T – PTK-8064 (if stocked) 20T – PTK-8065 (if stocked) Why You’ll Love It:Whether you’re dialing in your gearing for max speed or torque, ProTek pinions are built tough and deliver reliable performance on or off-road.  

Read more less

Upgrade your drivetrain with PN Racing’s high-precision machine cut Delrin pinions. Designed with extra length for secure mounting, these lightweight black Delrin gears deliver smooth and efficient power transfer for high-performance 1/10 scale applications. 🔥 Key Features: Available in 9T–16T tooth counts (Part #MR2709–MR2716) 64 pitch for precise, fine gearing adjustments Made from machine cut black Delrin for smooth mesh and lightweight performance Extra length (10.5mm) keeps the pinion fully seated on the motor shaft Perfect for optimizing gear ratios in stock and modified classes ✅ Compatibility: Fits most 1/10 scale vehicles using 64 pitch spur gears Compatible with Touring Car (TC6.2, TC7.1, TC7.2, TC7.4) Also works with RC10 series and other 64P setups (check your manual for fitment) 📦 Includes: (2) 64P Long Delrin Pinion Gears (tooth count based on selected part #) ⚠️ Note:Select the correct tooth count (9T–16T) based on track layout and motor timing for best performance.

Read more less

Tough Steel. Smooth Power. Precision Fit. Fine-tune your gearing and boost your performance with the Arrma Mod 0.5 Pinion Gear (2.3mm Bore). Engineered from hardened steel, this pinion gear offers the perfect blend of strength, efficiency, and reliability — ensuring smooth, consistent power delivery in every run. Built for Durability & Performance Whether you’re racing or bashing, Arrma’s Mod 0.5 gears deliver superior wear resistance and precision meshing. With multiple tooth count options (16T–22T), it’s easy to dial in your gearing setup for the perfect balance of speed and torque. Features: High-strength steel construction for maximum durability 2.3mm bore for tight, reliable fitment Smooth power transmission for efficient performance Precision-cut Mod 0.5 gear teeth for consistent mesh Available in multiple tooth counts (16T–22T) to fine-tune gear ratios Includes: (1) Mod 0.5 Pinion Gear (1) 3x4mm Set Screw Arrma — Designed Fast, Designed Tough.

Read more less

Traxxas Front Differential Ring & Pinion Gear Set (47T/12T) – Part #10778🔧 Smooth Power. Front-End Strength. Keep your front drivetrain running strong with this genuine Traxxas 47-tooth ring and 12-tooth pinion gear set. Designed specifically for the front differential, these gears ensure reliable power transfer and smooth performance—whether you're bashing, crawling, or racing. ✅ 47T ring gear / 12T pinion gear✅ For front planetary differentials✅ Precision-cut for smooth mesh and durability✅ OEM replacement for easy maintenance 📦 Includes: (1) 47-Tooth Differential Ring Gear (1) 12-Tooth Differential Pinion Gear  

Read more less

Traxxas Plastic Servo Gear Set – 2070/2075 Part #: 2072A Restore your Traxxas 2070 or 2075 servo with this factory replacement plastic gear set. Perfect for quick fixes and keeping your steering or throttle responsive and reliable. ✅ Features: Direct replacement for Traxxas 2070 & 2075 servos Includes precision plastic gears and two bearings Quick and easy installation 🛠️ Also Consider: 💡 Looking for long-term durability?Upgrade to the Traxxas Metal Gear Set (TRA2072R) for added strength and performance under high-stress conditions. 📦 Includes: (1) Complete Set of Plastic Gears (2) Servo Bearings For use with: Traxxas 2070 & 2075 servos 🔧 Keep a spare set in your pit box – fast, easy repair when you need it most!

Read more less

Upgrade your drivetrain with the durability and precision of the Traxxas Hardened Steel Mod 1.0 Pinion Gear. Designed for high-power setups, this 20-tooth gear features a 5mm bore and Mod 1 tooth pitch, making it perfect for brushless applications and heavy-duty RC builds. 🔩 Includes: (1) Hardened Steel 20T Pinion Gear (Mod 1.0, 5mm bore) (1) Set Screw ✅ Features: Made from tough hardened steel for long-lasting performance Mod 1.0 pitch for compatibility with high-torque drivetrains Fits motors with 5mm output shafts Ideal for 1/8 scale vehicles and high-power brushless setups Whether you're bashing or racing, this pinion gear delivers strength and reliability when it counts.

Read more less

Upgrade your drivetrain with Traxxas 32P Heavy Duty Pinion Gears, built tough from hardened steel for maximum durability and long-lasting performance. Available in a range of tooth counts from 12T to 22T, these 32-pitch pinions are perfect for high-power setups and intense off-road action. 🔩 Precision-machined hardened steel🔩 Perfect for brushless power systems🔩 Includes set screw for secure installation🔩 Available sizes: 12T through 22T🔩 Fits 3mm motor shafts Includes: (1) Steel Pinion Gear (Choose Tooth Count) (1) Set Screw Part Numbers: 3942X–3952X (select by tooth count) Built for strength. Made for speed. Trusted by Traxxas.

Read more less

  Traxxas Planetary Differential Gears & Shafts – Part 2382Restore the Heart of Your Diff. Keep your drivetrain smooth and reliable with this replacement set of internal differential gears and shafts from Traxxas. Whether you're rebuilding a worn diff or stocking up for maintenance, Part 2382 gives you everything you need inside the case. ✅ Direct-fit OEM replacement – fits standard Traxxas planetary differentials✅ Includes planet gears + internal shafts – complete internal gear set✅ Smooth power transfer – maintains tight handling and acceleration✅ Great for rebuilds or spares – essential for long-term performance 📦 Includes: (4) Planet Gears (2) Internal Gear Shafts Part #: 2382 🔧 Pro Tip: Pair with fresh diff grease and new output gears for a complete differential refresh.

Read more less

⚙️ Precision Gearing for Power, Speed & Control Fine-tune your 1/18 TRX4M’s performance with the INJORA Stainless Steel Transmission Gear Set, engineered for maximum strength and customizable drive ratios. Whether you’re after extreme torque for rock crawling or faster wheel speed for trail runs, this complete set delivers the perfect balance of performance, durability, and precision. ⚡ Features: 🔩 CNC-machined stainless steel gears for long-lasting durability 🧭 Multiple gear ratios for custom underdrive or overdrive setups 💪 Ultra-low 40.3:1 reduction gives unstoppable torque for technical climbing ⚙️ Includes 11T motor pinion — ready to install and tune 🧴 Pro Tip: Don’t forget to grease the gears before installation for smooth operation and longer life 📏 Specifications: Part Number: 4M-36 Material: Stainless Steel Reduction Ratios: 40.3:1 → Extreme Underdrive (≈ -59%) 24.4:1 → Moderate Underdrive (≈ -32%) 16.61:1 → Stock Ratio 9.7:1 → Overdrive (≈ +71%) Motor Pinion: 11T Weight: 15g (0.53oz) 📦 Includes: (1) Complete Transmission Gear Set (1) 11T Motor Pinion 🔧 Compatibility: 1/18 Traxxas TRX4M (Defender, Bronco, K10, F-150) INJORA 370 Transmission 💡 Pro Tip:Run the 40.3:1 set for low-end torque and precise control on steep climbs, or the 9.7:1 overdrive for high-speed trail performance. Keep multiple sets in your pit to swap for any terrain.  

Read more less

⚙️ Heavy-Duty Spiral Input Gear for Extreme 6S Power SystemsThe Arrma 6S BLX Main Spiral Cut Input Gear (10T) is built for durability and precision, designed to handle the brutal torque and high speeds of Arrma 6S BLX vehicles. Crafted from hardened steel with a spiral-cut tooth profile, this gear delivers ultra-smooth operation and superior strength for demanding RC conditions. 🌟 Features Hard-wearing steel construction for extreme durability and long life Spiral-cut tooth profile ensures smoother engagement and quieter drivetrain performance 10 precision-machined gear teeth provide consistent, efficient power transfer ARRMA Safe-D keyed fit system ensures a secure, slip-free connection to the input shaft cup Designed for high-load 6S BLX applications — ideal for bashers and racers alike 📦 Includes (1) 10T Spiral Cut Main Input Gear 🔧 Requires AR310497 – 43T Spiral Main Differential Gear ARA310976 – Input Shaft Cup Sleeve (4pcs) ARA310977 – Input Shaft Cup (SAFE-D) ✅ Compatibility Arrma Kraton 6S BLX Arrma Notorious 6S BLX Arrma Outcast 6S BLX Arrma Typhon 6S BLX Arrma Talion 6S BLX Arrma Mojave 6S BLX Arrma Fireteam 6S BLX 💪 Engineered for unstoppable 6S performance — count on this genuine Arrma spiral gear for strength, precision, and reliability under extreme conditions.  

Read more less

Traxxas 54T Spur Gear – 0.8 Mod / 32-Pitch – Part 3956RSmooth Power Transfer. Built for Brushless. The Traxxas 54-Tooth Spur Gear (3956R) is a direct replacement part for high-performance 1/10 scale models using a 0.8 Mod / 32-pitch gear setup. Ideal for brushless power systems, this gear delivers strong, consistent power transfer while holding up to heavy torque. ✅ Tooth Count: 54T – perfect for torque-balanced gearing setups✅ Pitch: 32P / 0.8 Mod – tough and compatible with brushless motors✅ Durable molded construction – long-lasting under load✅ OEM direct fit for Traxxas models using 32P spur gears✅ Compatible with slipper clutch systems 📦 Includes: (1) 54-Tooth Spur Gear (32P / 0.8 Mod) Part #: 3956R 💡 Pro Tip: Pair with the correct pinion gear to dial in your ideal torque vs. speed ratio for your terrain and driving style.  

Read more less

Traxxas Hoss 54T Spur Gear – 0.8 Metric Pitch (32P Compatible) – Part 3956XHigh-Torque Gear for Big Power Builds. The Traxxas 3956X 54-Tooth Spur Gear is specifically designed for the Hoss 4X4 VXL 4WD Monster Truck, providing durable power transfer for aggressive driving and brushless torque. With 0.8 Mod metric pitch (compatible with 32-pitch), it’s the perfect match for high-load conditions. ✅ 54-tooth spur gear – factory spec for torque-heavy setups✅ 0.8 Mod (metric pitch) – compatible with 32-pitch pinions✅ Heavy-duty molded construction – strong and durable✅ Designed for Hoss 4X4 VXL – optimized for monster truck drivetrain✅ Requires Traxxas #6780 Center Differential for installation 📦 Includes: (1) 54T Spur Gear (0.8MP / 32P compatible) Part #: 3956X 💡 Note: This spur gear is not a direct bolt-on—you’ll need the TRA6780 center differential to install it properly on the Hoss 4X4 VXL.  

Read more less

Keep your drivetrain smooth and reliable with the Traxxas Rear Differential Ring and Pinion Gear Set. Designed for the Mini Maxx and Mini XRT, this set includes the 47-tooth ring gear and 12-tooth input pinion gear to restore differential performance. ✅ Direct Replacement – OEM fit for Mini Maxx and Mini XRT rear differential✅ Durable Construction – Built to handle high torque and hard bashing✅ Complete Set – Includes both ring gear and input pinion gear✅ Note: Pinion gear is not compatible with optional center differential or slipper clutch Includes: (1) 47T Ring Gear (1) 12T Input Pinion Gear Compatibility: Traxxas Mini Maxx Traxxas Mini XRT Restore smooth, efficient power transfer with the Traxxas 10779 Ring & Pinion Gear Set — tough enough for extreme 1/10 monster truck action.  

Read more less

Dial in your gearing with the XRAY Composite 3-Pad Slipper Clutch Spur Gears. Precision-molded from a special composite material, these spur gears deliver durability, smooth operation, and consistent performance. Available Tooth Counts (48 Pitch): 72T – Part #365872 75T – Part #365875 78T – Part #365878 81T – Part #365881 84T – Part #365884 Features: Lightweight yet durable composite construction Designed specifically for the XRAY 3-Pad Slipper Clutch System Provides smooth power transfer and quiet operation Wide range of sizes lets you fine-tune gearing for track conditions and motor setup Compatibility: XRAY XB2 (2WD Buggy) XRAY XT2 (2WD Stadium Truck) Other XRAY models using the 3-Pad Slipper Clutch System (check your manual)      

Read more less

Traxxas VXL Planetary Gear Differential – Part 2382Built Strong. Tuned for VXL Power. The Traxxas VXL Planetary Gear Differential is designed to handle the high output of brushless power systems. Featuring a steel ring gear for added strength, this complete kit is perfect for replacing or upgrading your existing diff on VXL-equipped vehicles. ✅ Heavy-duty steel ring gear – improved durability under brushless torque✅ Complete differential kit – all internal gears, shafts, and housing included✅ Smooth, consistent power delivery – ideal for high-speed bashing or racing✅ Designed for VXL models – fits most Traxxas 2WD platforms 📦 Includes Everything to Build One Differential: Differential housing Steel ring gear Planet gears & internal shafts Cross pins, output gears, & assembly hardware 🔩 Part #: 238 💡 Pro Tip: Use with high-quality diff grease for smoother operation and longer gear life.

Read more less

🛠️ Traxxas Steel Wide-Face Mod 1.0 Spur Gear (46T / 50T / 54T) — Heavy-Duty Performance! Upgrade your drivetrain with Traxxas Steel Wide-Face Spur Gears, available in 46T, 50T, or 54T tooth options. Designed for maximum durability and load handling, these heavy-duty steel gears are perfect for high-torque setups, big power, and extreme bashing. ⚙️ Available Variants: 46 Tooth 50 Tooth 54 Tooth 🔩 Why Choose Steel? ✅ Wider face for increased tooth engagement ✅ Hardened steel construction for ultimate durability ✅ Perfect for high power brushless systems and intense terrain 🔧 Gear Change Effects: Spur Gear Size Effect Larger Spur (Higher T) 🔹 More acceleration 🔹 Lower top speed 🔹 Best for short, technical tracks or heavy loads Smaller Spur (Lower T) 🔹 Smoother, slower take-off 🔹 More top speed 🔹 Ideal for open tracks and speed runs ✅ Compatible With: Traxxas Maxx Traxxas X-Maxx Traxxas XRT 📦 Includes: (1) Traxxas Steel Wide-Face Spur Gear in your selected size (46T, 50T, or 54T) 🌀 Need extreme strength and tuning flexibility? Steel is the way to go. Gear up your Maxx, X-Maxx, or XRT for whatever the track throws your way!

Read more less

⚙️ Precision-Engineered Power. Made in the USA. The Avid RC Triad 69-Tooth Spur Gear is built exclusively for the Avid Triad Slipper Clutch System, delivering ultra-smooth, ultra-quiet performance with unmatched durability. Crafted from Avid’s custom-blend low-noise material, this gear eliminates the harsh sound of standard fiberglass spurs while offering three times the impact strength of Delrin — all in a perfectly balanced, true-spinning design. ⚡ Features: 🇺🇸 Made in the USA from a proprietary high-strength plastic — zero glass fibers for low noise and maximum toughness 🔇 Ultra-quiet operation with 3× the impact strength of Delrin 🌀 Precision 48-pitch tooth form provides smooth rolling and consistent mesh 🎯 Centerpoint injection-molded for perfect balance and true rotation 🧩 Number of teeth molded in for easy identification 🔢 Marked with “1” and “2” for single- or dual-plate Triad clutch setup compatibility 🧠 Designed exclusively for use with the Avid Triad Slipper Clutch System 📏 Specifications: Pitch: 48P Tooth Count: 69T Compatibility: Avid Triad Slipper Clutch System (Stock or Mod Kit) Part Number: AV1020-69 💡 Pro Tip:Keep a few different Triad spur sizes (66T–87T range) on hand so you can fine-tune your gearing for any track layout or motor setup.  

Read more less

⚙️ Ultimate Torque. Total Control. Boost your TRX4M’s crawling power with the INJORA CNC Aluminum Complete Transmission, pre-assembled and precision-machined for maximum strength and performance. Featuring the 40.3:1 underdrive gear ratio, this transmission delivers extreme torque and smooth throttle response — perfect for technical rock crawling and slow-speed control. ⚡ Features: 🧱 Pre-assembled and ready to install 💪 High-torque 40.3:1 underdrive gearing for maximum low-end power (≈ -59%) ⚙️ CNC-machined aluminum housing for strength and durability 🖤 Black anodized finish for a clean, factory look 🧩 Direct bolt-on fit for the TRX4M — no modification required 📏 Specifications: Part Number: 4M-55UD-BK Material: CNC Aluminum Color: Black Internal Ratio: 40.3 : 1 (Underdrive 59%) Weight: 32 g (1.13 oz) 📦 Includes: (1) Pre-assembled INJORA CNC Aluminum Complete Transmission 🔧 Compatibility: 1/18 Traxxas TRX4M (Defender / Bronco / K10 / F-150) 💡 Pro Tip:Pair this with INJORA brass links and weighted wheels for unstoppable torque, precise control, and better stability on steep climbs.  

Read more less

⚙️ Ultimate Strength. Smoother Shifts. Superior Durability. Upgrade your crawler’s heart with the INJORA CNC Aluminum Complete Transmission Gearbox, precision-engineered for the Axial SCX24 and AX24 platforms. This drop-in upgrade delivers unmatched strength, smoothness, and longevity — a true performance overhaul for your micro rig. Machined from CNC aluminum with hardened steel gears, this gearbox dramatically increases wear resistance and efficiency, ensuring smooth, consistent power delivery across climbs and descents. Available in Red or Black to match your build’s style. ⚡ Features: 🛠️ Precision CNC-machined aluminum case for enhanced durability ⚙️ Hardened steel gears for maximum strength and longevity 🧩 Direct-fit design — fully assembled and ready to install 🧲 Upgraded reliability vs. stock plastic gearbox 🎨 Available in Red or Black anodized finishes 🏁 Perfect balance of weight and performance for improved handling 📏 Specifications: Part Number: SCX24-130 Case Material: CNC Aluminum Gear Material: Hardened Steel Motor Pinion Material: Nylon Weight: 16g (0.56oz) Transmission Gears: 51T & 19T Spur Gear: 0.3 Mod, 55T Pinion Gear: 11T (Nylon) 📦 Includes: (1) INJORA Complete CNC Aluminum Transmission Assembly 🔧 Compatibility: Axial SCX24 (all series) Axial AX24 💡 Pro Tip:Pair this transmission with INJORA Overdrive/Underdrive Gears (SCX24-77) for full control over your crawl ratio — giving your rig the perfect blend of torque and speed.  

Read more less

⚙️ Precision Aluminum Spur Gear Upgrade for Traxxas 2WDTake your Traxxas performance to the next level with the Hot Racing 48 Pitch Hard Anodized Aluminum Spur Gear (90T). Designed for speed enthusiasts and precision builders, this CNC-machined aluminum gear provides smoother power transfer, reduced flex, and improved efficiency compared to the stock nylon spur gear. 🔩 About the Spur Gear Crafted from 6061-T6 aluminum, this gear is hard-anodized in a sleek light gunmetal finish for enhanced strength and wear resistance. The included silver anodized countersunk washers and high-strength hardware ensure a secure and professional-grade installation. Perfect for high-RPM setups and consistent gear mesh, this upgrade provides durability without sacrificing performance. 🌟 Features CNC-machined 6061-T6 aluminum for high precision and strength Hard-anodized gunmetal finish resists corrosion and wear Direct replacement for the stock nylon spur gear Silver anodized washers and mounting hardware included 48 pitch gearing with a 90-tooth configuration Ideal for smooth, efficient, high-speed performance 📏 Specifications Pitch: 48P Tooth Count: 90T Mounting Holes: 3 Tooth Face Width: ~5mm 📦 Includes (1) 48 Pitch Aluminum Spur Gear (90T) (3) Mounting Screws (3) Silver Anodized Countersunk Washers (3) Flat Washers (for optional spacing) ⚠️ Notes Aluminum gears prioritize speed and precision over maximum durability. Do not overtighten the slipper clutch — excessive tension may cause gear failure. Recommended motor temps: below 160°F, ESC below 160°F. For added motor security, use Hot Racing HRATE18L06 motor lock plate. Always check gear alignment before running. 🚗 Compatibility Traxxas Bandit Traxxas Rustler 2WD Traxxas Slash 2WD Traxxas Stampede 2WD 🏁 Built for precision, performance, and durability — the Hot Racing 90T aluminum spur gear keeps your Traxxas running smooth, fast, and reliable.

Read more less

Boost your efficiency with the XRAY Slipper Eliminator Composite Spur Gear. Designed to work seamlessly with the XRAY Slipper Eliminator system, this 69T / 48 pitch spur gear offers reduced weight, smooth power transfer, and dependable durability. Made from XRAY’s premium composite material, it provides a perfect balance of strength and low rotational mass. Features: High-strength composite construction for maximum durability Lightweight design reduces drivetrain drag Precision molded for smooth and quiet operation Intended for use with the XRAY Slipper Eliminator Set Compatibility: XRAY XB2 – 1/10 2WD Buggy (all versions, check manual for gearing) XRAY XT2 – 1/10 2WD Stadium Truck (all versions, check manual for gearing) Part Number: 325869      

Read more less

Perfect for High-Power Drag Racing Builds📦 Part #: Choose 20T–40T Take your drag racing setup to the next level with the ProTek RC 48P Lightweight Hard Anodized Aluminum Pinion Gear. These pinions are specifically engineered for high-RPM 4-pole motors with 5.0mm shafts, making them ideal for no-prep and straight-line drag applications. Precision-cut for smooth 48 pitch mesh, they're built to deliver maximum efficiency and faster acceleration by reducing rotational mass. 🔧 Key Features: Pitch: 48P (Perfect for drag and speed builds) Bore Size: 5.0mm – fits large shaft 4-pole motors Material: Lightweight aluminum for reduced rotating mass Finish: Hard anodized for durability under high stress Etched Tooth Count: Easy size identification Performance: Quick spool-up, consistent gear mesh, and reliable grip under load 🏁 Why It Matters: Less mass = faster response. Whether you're trying to shave tenths off your ET or just want smoother power delivery, these ProTek pinions give your build the edge where it counts. 👉 Choose from 20T to 40T to dial in your exact gearing needs! Note: Compatible with 48 pitch spur gears and motors that use 5mm output shafts. Always double-check mesh and gear clearance during install.

Read more less

Upgrade your drivetrain with precision and strength. The Traxxas 20T Machined Mod 1.0 Pinion Gear is built for serious performance, featuring a 5mm bore and high-quality machined steel construction. Designed for the Traxxas E-Revo 2.0 and Maxx, this gear is ideal for high-torque brushless setups when paired with a steel spur gear. Features:• 20-tooth Mod 1.0 pitch• 5mm bore fits 1/8-scale motor shafts• Precision-machined steel construction• For use with steel spur gears only• Perfect for E-Revo 2.0 and Maxx Includes:• (1) 20T Machined Steel Pinion GearPart Number: 6494R

Read more less

Traxxas X-Maxx Metal Gear Set – 2085 / 2085X Servos Part #: 2087X Upgrade or repair your Traxxas 2085 or 2085X servo with this heavy-duty metal gear set. Built to withstand the extreme torque and punishment dished out by the X-Maxx and other high-powered vehicles. ✅ Features: Precision hardened metal gears Designed for Traxxas 2085 and 2085X waterproof servos Increases durability and longevity over stock plastic gears Ideal for heavy-duty bashing and racing 📦 Includes: (1) Complete Metal Gear Set (1) Bearing Set Compatible with: Traxxas 2085 Servo Traxxas 2085X High-Torque Servo 🛡️ Keep your steering strong and reliable — even under max load. Perfect for serious X-Maxx owners and hard-core bashers!

Read more less

The Hot Racing HRASJT254 is a hardened steel 32-pitch spur gear designed for demanding 1/10 Traxxas applications. CNC machined from hardened steel and lightened for reduced rotating mass, this 54-tooth spur gear offers exceptional durability and consistent performance under high-power setups. Ideal for drivers looking to replace worn plastic spur gears or upgrade for improved reliability, this spur gear is built to handle aggressive driving while maintaining precise gear mesh. 🔧 Features CNC-machined, lightened hardened steel construction Black oxide coating for corrosion resistance and long service life Includes silver-colored countersunk washers for secure mounting Designed for 32 pitch (0.8 module) gearing setups 📐 Specifications Number of Teeth: 54 Gear Pitch: 32 pitch (0.8 module) Mounting Holes: 3 Tooth Face Width: 6mm (0.24 in) Internal Diameter: ~11mm (~0.43 in) 📦 Includes 54T 32-Pitch Steel Spur Gear (3) Mounting Screws (3) Silver Countersunk Washers (3) Shims (use as needed to prevent screw protrusion through spur mounting plate) ⚠️ Requirements & Notes Requires hardened clutch bell or pinion gear Requires slipper transmission Will NOT work with vehicles equipped with a center gear differential For center-diff vehicles, use Hot Racing SSLF2-series spur gears instead ✅ Compatibility Traxxas E-Revo (1/10) Traxxas Jato 3.3 Traxxas T-Maxx 3.3 Traxxas T-Maxx 2.5R Traxxas Summit (1/10) Traxxas Rally VXL Traxxas Slash 4X4 Traxxas Stampede 4X4

Read more less

Upgrade your suspension precision with the AVID 13mm Ringer Shock Collar Kit, engineered to let you run 13mm springs on multiple shock platforms including Team Associated 13mm, TLR G3/3.5, and Schumacher LD3/L1R. Crafted for racers who demand accuracy and consistency, these collars feature offset laser-etched AVID logos that allow you to match spring tension left-to-right in clean ¼-turn increments. Machined with AVID’s signature silver ringer highlight, these collars not only perform—they look pro doing it. Features Compatible with 13mm springs across popular racing platforms Fits: AE 13mm, TLR G3/3.5, Schumacher LD3/L1R shock bodies Offset laser-etched AVID logos for easy visual alignment Allows perfect ¼-turn spring tension adjustments Internal o-ring design keeps collars firmly in place Signature silver ringer machining for premium finish Works great with AE V3, XRAY, and 1UP 13mm springs Tips Spring cups are not included.Recommended options:• AE 13mm Spring Cups – ASC91966• AE 12mm Spring Cups – ASC91814 (compatible with some setups) Includes (4) AVID 13mm Shock Collars (4) Internal O-Rings (pre-installed)  

Read more less

⚙️ Quiet Strength. Precision-Engineered in the USA. The Avid RC Triad 72-Tooth Spur Gear delivers smooth, whisper-quiet performance and unbeatable strength — designed exclusively for the Avid Triad Slipper Clutch System. Each gear is made from Avid’s custom-blend, glass-free high-strength material, offering three times the impact resistance of Delrin while running noticeably quieter than traditional fiberglass-reinforced spurs. Perfectly balanced, true-spinning, and built to last — this is the gear serious racers trust. ⚡ Features: 🇺🇸 Made in the USA from Avid’s premium low-noise, high-strength composite (zero glass fibers) 🔇 Ultra-quiet operation with 3× the impact strength of Delrin 🌀 Precision 48-pitch tooth form ensures smooth, drag-free rolling 🎯 Center-point injection molded for perfect balance and true rotation — no wobble 🧩 Molded tooth count and setup indicators for easy identification and assembly 🔢 Marked with “1” and “2” for single- or dual-plate Triad clutch configuration 🧠 Designed exclusively for the Avid Triad Slipper Clutch System (Stock or Mod kits) 📏 Specifications: Pitch: 48P Tooth Count: 72T Compatibility: Avid Triad Slipper Clutch System Part Number: AV1020-72 Made in: USA 💡 Pro Tip:Use 72T for mid-range gearing — perfect balance between acceleration and top-end speed on most 1/10 2WD buggy and stadium-truck setups running a Triad slipper.  

Read more less

⚙️ Fine-Tune Your Crawl Ratio for Maximum Control! Unlock next-level crawling precision with the INJORA Overdrive & Underdrive Gears — the ultimate upgrade for Axial SCX24 and AX24 owners. Designed from hardened steel for unmatched durability, these gear sets let you fine-tune your drivetrain for better climbing, improved cornering, and reduced rollovers. Choose your setup: Overdrive the front for more aggressive climbs and tighter turns, or Underdrive the rear for smoother control and slower descent. ⚡ Features: 🔩 Hardened steel construction for long-lasting performance 🔄 Front or rear compatible — works in both axles ⚙️ Fine-tune crawl behavior: 2/12T Overdrive → +33% speed 2/13T Overdrive → +23% speed 2/14T Overdrive → +14% speed 2/16T → Neutral (no speed change) 1/12T Underdrive → –33% speed 2/18T Underdrive → –11% speed 🧲 Improves climbing and steering precision 🚙 Reduces rollover and enhances traction 📏 Specifications: Part Number: SCX24-77 Material: Hardened Steel Weight: 4g (0.14oz) Compatibility: Axial SCX24 (all series) & AX24 📦 Includes: (1) INJORA Overdrive or Underdrive Gear Set (choose ratio) 💡 Pro Tip:Pair with INJORA Brass Diff Covers and Big Bore Shocks to optimize both your weight distribution and low-speed crawl precision — the perfect combo for serious scale performance.  

Read more less

The XRAY XB2 Composite Idler Gear is the direct replacement 25-tooth idler gear for the XB2 1/10 scale buggy. Precision molded for durability and smooth drivetrain operation, this gear keeps your XB2 running strong with consistent performance. Features: Genuine XRAY replacement part Composite construction for strength and low wear Smooth, efficient power transfer 25-tooth idler gear Compatibility: XRAY XB2 1/10 Buggy Includes: (1) 25T Composite Idler Gear  

Read more less

The Hot Racing 16T Mod-1 Pinion Gear is built from hardened steel for maximum strength and precision. Ideal for 1/8-scale vehicles running Mod-1 gears, it ensures smooth power delivery and long-lasting durability under extreme conditions. ✅ Hardened Steel Construction – Designed for strength and wear resistance✅ 5mm Bore / Mod-1 Pitch – Compatible with standard 1/8-scale brushless setups✅ Precision-Cut Teeth – Delivers smooth, efficient power transfer Specifications: Length: 12 mm (0.47") Inner Diameter: 5 mm (0.20") Color: Black Part #: NSG16M1Includes: (1) 16T Mod-1 Pinion Gear (1) 4×4 mm Set Screw Requires installation on vehicle

Read more less

Upgrade your Mini-Z 2WD drivetrain with PN Racing PNWC Machine Cut Delrin Pinions. These high-precision 64 pitch pinions are built from durable Delrin material and feature an extra-long 10.5mm profile to ensure a secure hold on the motor shaft. The Yellow series delivers smooth, efficient mesh and lightweight performance for serious Mini-Z racers. 🔥 Key Features: Available in 9T–16T tooth counts: #MR2709WC – 9T #MR2710WC – 10T #MR2711WC – 11T #MR2712WC – 12T #MR2713WC – 13T #MR2714WC – 14T #MR2715WC – 15T #MR2716WC – 16T 64 pitch for precise gearing adjustments Machine cut Delrin for accuracy and smooth operation Extra length (10.5mm) keeps the pinion fully seated on the Mini-Z motor shaft Lightweight construction reduces rotating mass while maintaining durability ✅ Compatibility: Kyosho Mini-Z 2WD (1/28 scale) PN Racing Mini-Z upgrade platforms Other 1/28 scale cars using 64P spur gears 📦 Includes: (2) 64P Long Delrin Pinion Gears (per selected tooth count) ⚠️ Tip:Choose tooth count to match your track: Lower tooth (9T–11T) = more torque Higher tooth (12T–16T) = more top speed

Read more less

🌀 Stronger. Smoother. Smarter. Upgrade your Mini Maxx’s drivetrain with the Hot Racing Steel Helical Rear Ring & Pinion Gear Set. Precision-machined from high-carbon steel, this 39T/10T gear combo delivers smoother operation, quieter performance, and higher torque-handling than stock. The helical cut design distributes load more evenly—perfect for high-power setups and serious bashers. ✅ Helical spiral-cut = quieter + smoother power delivery✅ High-carbon steel for extreme durability✅ Handles more torque with fewer teeth✅ Drop-in upgrade for the Traxxas Mini Maxx (rear) 📦 Includes:• (1) 39T Steel Helical Rear Ring Gear• (1) 10T Steel Helical Rear Pinion Gear Tame the torque. Quiet the chaos. Dominate the trail.

Read more less

Keep your Slash 4X4 running smooth and strong with this Traxxas 52T Spur Gear. Featuring a 0.8 Mod pitch (equivalent to 32 pitch), this durable gear is a direct replacement for your stock setup and delivers reliable power transfer for high-performance driving. Features:• 52-tooth spur gear• 0.8 Mod / 32 pitch• Durable molded construction• Fits Slash 4X4 and compatible models Includes:• (1) 52T Spur GearPart Number: 6843 Perfect for maintaining smooth acceleration and efficient gearing on your Slash 4X4.  

Read more less