💥 Heavy-Duty Upgrade for BLX 4X4 ModelsBoost durability and performance with this HD 13T input gear—perfect for replacing worn-out stock parts on your 1/10 Arrma 4X4! 🔧 Features: 13T bevel gear with 1.35M tooth profile Tough composite gear molded onto a metal splined shaft Precision-built for smooth operation and long-lasting durability Direct replacement for easy install 🔩 Includes:(1) HD Input Gear - 13 Tooth Use with Diff Sets #ARA310872 or #ARA310956  

Read more less

🚗 Keep your steering precise and strong! The Arrma 4x4 Steering Block Set is a direct replacement for worn or damaged steering blocks on your ARRMA 4x4 platform. Crafted from tough composite material, these blocks deliver long-lasting durability and crash resistance, even during the most extreme RC action. Precision molding ensures smooth suspension operation in all conditions. Includes: (1) Left Steering Block (1) Right Steering Block Key Features: Heavy-duty composite construction for increased crash resistance Precision molded for smooth operation and perfect fit Designed for long-term durability under high-impact bashing Direct OEM replacement—no modifications needed Compatibility: Fits a variety of ARRMA 4x4 vehicles (check your manual for exact fit) Get your steering back on point and ready for the next run with this reliable replacement set.

Read more less

Arrma Mega/BLX 4x4 Front Shock Set (2) (AR330550) Restore smooth handling and control with the Arrma Mega/BLX 4x4 Front Shock Set — the perfect replacement for worn or damaged shocks on your Big Rock, Granite, Senton, or Typhon 4x4. Built from high-quality materials and pre-filled with shock oil, these come fully assembled and ready to install. Features: Durable, high-quality construction for long-lasting performance Supplied fully assembled without springs Pre-filled with shock oil for quick installation Includes spring spacers for ride height fine-tuning Ready to bolt on — just add your preferred front springs Includes: (2) Assembled Front Shock Absorbers (springs not included) Requires: Front shock springs (ARA330459 or ARA330538, depending on model) Compatibility: Arrma Big Rock 4x4 (BLX & Mega) Arrma Granite 4x4 (BLX & Mega) Arrma Senton 4x4 (BLX & Mega) Arrma Typhon 4x4 (BLX & Mega) Built to get you back on the track or bash spot with confidence.

Read more less

Keep your Arrma vehicle tight and race-ready with the Arrma Composite Ball Cup Set. This all-in-one pack includes a variety of essential components for steering, camber, and sway bar links—plus bonus body mounts and a front bumper to round out your toolbox. 🔧 Features: ✅ Made from super-tough composite material for durability✅ Precision-fit hardware holes for easy installation✅ Includes Arrma-liveried front bumper for added protection and style✅ Specially designed body shell mounts for quick and secure fit 📦 Includes: • Camber Link Ball Cups• Steering Link Ball Cups• Sway Bar Link Ball Cups• Front Bumper• Body Shell Mounts 🧰 A must-have set for maintenance, repairs, or building up your parts bin!

Read more less

Protect your steering system and keep control precise with the Arrma Typhon 3S BLX Servo Saver Set. This compact, high-quality unit combines the servo horn and servo saver into one durable part, built for long-lasting performance. Features: Strong composite construction for durability in all conditions Servo horn & servo saver combined for a compact, efficient design 25T servo spline for secure, precise fitment Includes: (1) Direct Mount Servo Saver The perfect replacement to keep your Typhon 3S BLX steering smooth, responsive, and protected.

Read more less

Keep your suspension tight and reliable with the Arrma 4x67.5mm Lower Hinge Pins. Built from durable steel, these hinge pins are a direct replacement for worn or bent parts, ensuring your suspension arms stay secure under extreme bashing or racing. ✅ Durable Steel Construction – Handles heavy impacts and rough terrain✅ Direct Replacement – Genuine Arrma OEM fit for easy install✅ Suspension Essential – Keeps lower suspension arms aligned and moving freely Includes: (2) 4x67.5mm Lower Hinge Pins – Part #ARA330381 Compatibility: Arrma 6S BLX / EXB models (check your manual for exact fitment) Built tough for extreme RC action — the Arrma ARA330381 Lower Hinge Pins keep your suspension performing at its best.  

Read more less

  Add downforce and durability to your 1/8 Arrma vehicle with the Arrma 224mm Rear Wing. Made from high-strength composite material, this wing is built to withstand extreme bashing while improving stability at high speeds. ✅ Durable Composite Construction – Tough enough for racing and hard landings✅ Improves Stability – Adds downforce for better handling and control✅ Direct Replacement – Genuine Arrma OEM part for a perfect fit✅ Black Finish – Sleek factory look with aggressive style Includes: (1) 224mm Black Rear Wing – Part #AR480002 Compatibility: Fits Arrma 1/8 6S BLX / EXB models (Kraton, Talion, Notorious, Outcast, and others — check manual for exact fitment) Tough, stylish, and functional — the Arrma AR480002 Rear Wing keeps your rig looking sharp and handling at its best.

Read more less

Arrma Typhon Grom Composite Chassis (200mm) Direct Replacement Chassis for 1/14 Typhon Grom This composite chassis is a genuine Arrma replacement part, designed to match the stock 200mm wheelbase configuration. Made from tough composite materials and reinforced in high-stress areas, it ensures long-lasting durability and a precise fit for your Typhon Grom buggy. Features: ✅ Durable Composite Material – Built to handle rough terrain and high-impact action.✅ Precision Manufactured – Ensures a secure and reliable fit.✅ Reinforced High-Stress Areas – Extra material added where it’s needed most.✅ Integrated Lower Gearbox Housing & Suspension Mounts – Maintains the structural integrity of your buggy. Includes: 📦 (1) Composite Chassis - 200mm Wheelbase Compatibility: ✔ 1/14 Typhon Grom 223S DSC 4X4 RTR Brushless Buggy (ARA2306 & ARA2306S)✔ 1/14 Typhon Grom 4X4 RTR Brushed Buggy (ARA2106) Restore your Typhon Grom to peak condition with this high-quality replacement chassis! 🏎️💨  

Read more less

This is a set of two Pro-Line Black MX38 Badlands HP Belted 3.8" Truck Tires, Pre-Mounted on Raid wheels. Pro-Line Badlands tires are known for having a noticeable Motocross inspired tread and the updated Badlands MX38 HP tires improves on this with and even Bigger and Bolder knobby tread. The Badlands MX38 is a true All-Terrain tire that will find traction on any surface but is best suited for loose and loamy dirt, mud or grass. Pro-Line has used a refined processes to mold a High-Performance herringbone weave pattern Belt directly inside of the Badlands MX38 HP tires that will prevent the tire from ballooning or expanding during use. This design gives maximum control to put the power down even at high speeds. Quit wasting tires and lay down the power with a clear conscious. The Badlands MX38 HP 3.8" tires provide the incredible grip that you expect from Pro-Line due to the soft M2 compound and the aggressive Motocross inspired tread. In response to customer demand, Pro-line has designed an updated tire size to fit the current generation of Monster Trucks and the MX38 HP delivers at 3.48" wide and 6.8" tall. Features: Tire: Molded-in High-Performance Herringbone Weave Pattern Belt Aggressive Motocross Inspired Tread Design Badlands MX38 HP 3.8" tires Will Not Balloon or Expand During Use Soft M2 Compound Provides Incredible Grip on a Variety of Surfaces Belted Tires Give You Control to Put the Power Down Tire Size comes in at 3.48" wide and 6.8" tall Soft Foam Inserts Included Made in the USA, since 1982 Wheel: Removable Hexes Allow you to Easily Replace Damaged Hexes 17mm Wide Offset 8x32 Hexes are Included Wheel Made from High-strength, Durable DuPont Nylon Material Raid 10-spoke Wheel Design Mimics Full-size Racing Wheels M3 Wheel Hex Hardware Included Specifications: Height: 6.80" (173mm) Width: 3.48" (88mm) Includes: (2)  Badlands MX38 HP Belted 3.8" Pre-Mounted Truck Tires on Raid wheels COMPATIBILITY: Arrma Kraton 6S BLXHPI Savage Flux HPHPI Savage XHPI Savage XLTekno RC MT410Traxxas RevoTraxxas SummitTraxxas T-Maxx

Read more less

🔩 Arrma Granite Grom Front Suspension Arm Set "A" 🔩💥 Durable Replacement Suspension Arms for Granite & Typhon Grom 💥 Keep your Arrma Grom running strong with the Granite Grom Front Suspension Arm Set "A"! Whether you're hitting jumps, bashing through rough terrain, or just cruising, these tough suspension arms are designed to handle it all. Perfect for replacing worn or broken parts, this set ensures your RC stays race-ready and trail-tough. 💪🏆 Compatible with both the Granite Grom and Typhon Grom, installation is a breeze—so you can spend less time in the workshop and more time tearing it up! 🚗💨 ✅ Key Features: ✨ Direct replacement for stock components🛠️ Precision-molded for strength & durability🚙 Compatible with Arrma Granite Grom & Typhon Grom⚡ Easy installation for quick repairs💯 Includes both upper & lower front arms 📦 Includes: ✔️ (2) Front Upper Arms✔️ (2) Front Lower Arms 🔗 Compatibility: 🔸 Arrma Granite Grom🔸 Arrma Typhon Grom

Read more less

Keep your drivetrain strong with the Arrma 139mm Dogbone Set. Made from hardened steel, these dogbones deliver reliable power transfer under extreme 6S bashing and racing conditions. ✅ Heavy-Duty Steel – Built to handle high torque and brutal impacts✅ Precision Fit – Ensures smooth drivetrain operation and reduced wear✅ Direct Replacement – Genuine Arrma OEM parts for hassle-free installation✅ Pair Pack – Includes two dogbones for complete service or spares Includes: (2) 139mm Dogbones – Part #ARA310459 Compatibility: Arrma 6S BLX / EXB models (check manual for exact fitment to your vehicle) Strong, reliable, and bash-ready — the Arrma ARA310459 Dogbones keep your RC running at full power.

Read more less

  Upgrade your drivetrain strength and efficiency with the Arrma GP4 Spiral Cut Main Input Gear (10T). Designed for the Kraton 6S EXB, this gear features a spiral cut design for smoother meshing, improved durability, and quieter operation under extreme loads. ✅ Spiral Cut Design – Provides smoother gear engagement and less wear✅ Heavy-Duty Construction – Built to handle high torque and extreme 6S bashing✅ Direct Replacement – Genuine Arrma OEM part for easy installation✅ EXB Strength – Designed specifically for the Kraton EXB drivetrain Includes: (1) GP4 Spiral Cut Main Input Gear (10T) – Part #ARA310979 Compatibility: Arrma Kraton 6S EXB May also fit other 6S BLX / EXB vehicles requiring 10T spiral cut input gear (check manual for exact fitment) Keep your drivetrain running smoother and stronger with the Arrma ARA310979 GP4 Spiral Cut Main Input Gear.  

Read more less

  ARRMA Front & Rear Composite Upper Gearbox Covers / Shock Tower Set Durable Composite Replacement PartsUpgrade or replace your worn-out components with this ARRMA Front and Rear Upper Gearbox Cover and Shock Tower Set. Made from tough composite material, these parts offer reliable durability and precision fitment—keeping your ARRMA vehicle running strong on the track or trail. 🔧 Features: ✅ Tough composite material for long-lasting durability ✅ Precision-manufactured for consistent fit and easy servicing ✅ Integrated gearbox cover, shock tower, body post mount, upper inner suspension mount, and steering brace ✅ High-specification shock towers built for rough terrain 📦 Includes: (1) Front Gearbox Upper Cover (1) Rear Gearbox Upper Cover

Read more less

Restore the handling and control of your Arrma 4x4 with this genuine Rear Shock Set. Built tough and pre-filled with shock oil, these shocks are ready to bolt on and get your BigRock, Granite, Senton, or Typhon back in action. High-quality materials for durability and performance Supplied assembled, pre-filled with shock oil Spring spacers included for fine-tuning ride height Fits Arrma Mega 4x4 & BLX 4x4 BigRock, Granite, Senton, and Typhon Requires ARA330460 or ARA330539 springs to complete Includes: (2) assembled shock absorbers. Keep your rig dialed in with the ARA330551 Rear Shock Set — ready for action right out of the bag.

Read more less

Arrma 8S-BLX 182mm CVD Driveshaft – Kraton/Outcast 8S Heavy-Duty Replacement for Extreme 8S Power The Arrma 182mm CVD Driveshaft is a precision-engineered replacement part designed specifically for the Kraton and Outcast 8S BLX platforms. Built to handle the brutal torque and terrain-bashing performance of 8S brushless systems, this heavy-duty driveshaft delivers smooth power transfer and lasting durability. 🛠️ Features: 🧱 Tough Steel Construction – Built to endure extreme bashing conditions 🔄 Precision Dogbone Pins – Ensure consistent, smooth drivetrain operation ⚙️ CVD Coupling Design – Reduces maintenance while delivering ultra-smooth power delivery ✅ Compatibility: Arrma Kraton 8S BLX Arrma Outcast 8S BLX 💥 Ideal for racers and bashers who demand reliability under high-stress, high-speed conditions.

Read more less

  Arrma 3S BLX Rear Suspension Arm Set (2) (ARA330540) Refresh your ride’s handling and durability with this Rear Suspension Arm Set for the Arrma Typhon 3S BLX 4x4. Built to take hard hits and keep you racing, these arms are the perfect replacement for worn or damaged stock parts. Features: Tough composite material for superior crash resistance and long-lasting durability Precision shock mounting holes for a secure, accurate fit Hinge pin capture screw holes designed for maximum reliability in extreme conditions Includes: (2) Rear Suspension Arms Compatibility: Arrma Big Rock 3S BLX Arrma Typhon 3S BLX Arrma Typhon 4X4 550

Read more less

⚙️ Strength where it matters most. Upgrade your rear drivetrain with the Hot Racing Rear Steel CVD Axle Set, built for Losi NASCAR and Arrma Grom series vehicles (Granite Grom, Mojave Grom, Typhon Grom). Crafted from CNC-machined steel and paired with aluminum clamp-style hex hubs, these axles deliver superior strength, smooth operation, and better durability than factory dog bones and plastic shafts. ✅ Direct replacement for stock CVD dog bones✅ Heavy-duty CNC steel construction✅ Pre-assembled for quick installation✅ Aluminum wheel hex hubs for improved reliability✅ Compatible with ARA330840 rear arms & ARA330841 knuckles✅ Vehicle Compatibility: • Arrma Granite Grom • Arrma Mojave Grom • Arrma Typhon Grom • Losi NASCAR 📦 Includes:• (1) Rear Steel CVD Axle Set (pre-assembled)• Aluminum wheel hex hubs 💡 Pro Tip: Apply a light coat of grease to CV joints for smoother performance and extended life. 📦 Includes: • (1) Front Steel CVD Axle Set (pre-assembled)• Aluminum wheel hex hubs 💡 Pro Tip: Apply a light layer of grease to CV joints for maximum performance and longevity.  

Read more less

This is an optional set of RPM 4S Kraton and Outcast Front Suspension Arms, intended for use with ARRMA Kraton and Outcast kits and designed for strength and durability with features to better enhance performance. These A-arms deliver excellent slop elimination by reducing the amount of movement of the A-arm at the hinge pins, providing for better steering response and more consistent camber, caster and toe angle settings. The addition of a second shock mount hole further out on the arm provides a lower profile suspension set-up. This shock position allows the suspension to lay down a little further, dropping the ride height for a lower center of gravity and better cornering stability. All RPM A-arms are molded from their nearly indestructible blend of engineering grade nylons for performance you can rely on when conditions are at their worst. These arms are almost 25% thicker and able to take much more damage than stock. Features: Nearly 25% thicker than stock a-arms for extreme durability Less slop for improved suspension and steering performance Second shock mount hole for added adjustability Replaces stock #AR330521

Read more less

Arrma Rod End Set (12) Part #: ARA340186 Keep your suspension links tight and your handling dialed in with the Arrma Rod End Set. Designed as a direct replacement for worn or damaged rod ends, this set includes twelve high-quality plastic rod ends built for durability and precision fitment. 🔧 Features: ✅ Durable molded composite construction ✅ Precision fit for consistent suspension performance ✅ OEM replacement for easy maintenance ✅ Ideal for restoring steering and linkage reliability 📦 Includes: (12) Plastic Rod Ends 🚗 Compatibility: Arrma Kraton 4S BLX Arrma Outcast 4S BLX

Read more less

The ARRMA 21T 0.5MOD CNC Pinion Gear delivers precise power transfer and durability for high-performance 1/18–1/14 scale applications. Machined from high-quality steel with a 2.3 mm bore, it ensures smooth operation and reliable mesh with your spur gear setup. ✅ CNC-Machined Steel – Provides strength, precision, and long life✅ 2.3 mm Bore – Fits standard 2.3 mm motor shafts✅ 0.5 Module Pitch – Optimized for micro and mini ARRMA drivetrains✅ Set Screw Included – Easy and secure installation Compatibility:Available for many small-scale ARRMA vehicles and other 0.5 MOD applications (check your manual for exact fit). Includes: (1) 21T 0.5 MOD CNC Pinion Gear (1) Set Screw ⚡ Upgrade your drivetrain with the precision and reliability of ARRMA CNC-machined gears.

Read more less

  Add strength and protection to your chassis with the Arrma 6S BLX Steel Skid Plate. Built from tough steel, this skid plate is designed to shield your vehicle’s underside from heavy impacts, scrapes, and rough terrain while reinforcing the chassis for extreme bashing. ✅ Heavy-Duty Steel Construction – Provides superior protection compared to stock plastic✅ Chassis Reinforcement – Reduces flex and adds rigidity for better durability✅ Direct Replacement / Upgrade – Genuine Arrma OEM part for perfect fitment✅ Bash-Ready Design – Built to handle the punishment of 6S power Includes: (1) Steel Skid Plate – Part #ARA320625 Compatibility: Arrma 6S BLX models (check manual for exact fitment with your vehicle) Protect your chassis and keep your rig running strong with the Arrma ARA320625 Steel Skid Plate — tough enough for the hardest hits.

Read more less

Keep your power delivery smooth and reliable with the Arrma 116mm Dogbone. Built from tough, precision-machined steel, this dogbone transfers power from the differential to the wheels with strength and durability. ✅ Durable Steel Construction – Handles extreme torque and heavy bashing✅ Precision Fit – Ensures smooth drivetrain operation and reduced wear✅ Direct Replacement – Genuine Arrma OEM part for easy installation Includes: (1) 116mm Dogbone – Part #ARA310472 Compatibility: Arrma 6S BLX / EXB models (check your vehicle’s manual for exact fitment) Strong, dependable, and built for action — the Arrma ARA310472 Dogbone keeps your RC drivetrain running at peak performance.

Read more less

Keep your suspension strong with the Arrma Kraton EXB Front Upper Suspension Arms. Designed for extreme durability, these arms are direct replacements for your EXB and 6S BLX platforms, ensuring precise fit and long-lasting performance. ✅ Heavy-Duty Design – Built to withstand extreme bashing and racing✅ Precision Molded – Ensures accurate suspension geometry and alignment✅ Direct Replacement – Easy drop-in fit for Kraton EXB and compatible 6S vehicles✅ Arrma Tough – Genuine OEM part for lasting durability Includes: (2) Front Upper Suspension Arms Compatibility: Arrma Kraton 6S EXB May also fit other Arrma 6S BLX models (check manual for exact fitment) Strong, reliable, and built for hard action — the Arrma ARA330655 Front Upper Arms keep your Kraton EXB ready for the toughest terrain.  

Read more less

  Keep your monster truck running strong with the ARRMA dBoots RAGNAROK MT tires, pre-mounted on durable black multi-spoke wheels. These are direct replacements for your kit items, offering excellent all-terrain traction and hassle-free installation. ✅ Multi-Surface Grip – Aggressive RAGNAROK MT tread pattern delivers traction on dirt, grass, pavement, and more✅ Durable Rubber Compound – Long-lasting performance in all conditions✅ Pre-Glued Convenience – Ready to run with zero prep required✅ Tough Nylon Wheels – Multi-spoke design with black ARRMA styling✅ Foam Inserts Included – Optimized for balance of grip and handling✅ Vehicle Compatibility – Direct fit for the Arrma Granite 4x4 Mega and other 1/8 vehicles using 14mm hex Technical Information: Wheel Bead Diameter: 2.8" (72mm) Wheel Width: 2.0" (52mm) Wheel Hex Size: 14mm Overall Diameter: 5.15" (131mm) Package Type: Pre-Mounted Wheel Position: Front/Rear Vehicle Type: Monster Truck Scale: 1/8 Includes: (2) Black wheels with pre-glued dBoots RAGNAROK MT tires Direct replacements with race-proven ARRMA toughness — the dBoots RAGNAROK MT Pre-Mounts keep your rig ready for extreme action.  

Read more less

Keep your steering and suspension geometry dialed in with the Arrma Typhon 4x4 550 Composite Link Set. This replacement set includes both camber and toe links, built from durable composite material to withstand the demands of off-road bashing and racing. Features: Strong composite construction for long-lasting durability Maintains precise alignment for consistent handling and performance Direct fit for hassle-free installation Includes: Replacement camber links Replacement toe links Compatibility: Arrma Typhon 4X4 550

Read more less

Replace or refresh your ride with the Arrma Mojave Grom Composite Chassis, built to handle the demands of high-speed off-road action. Designed as a direct replacement, this precision-molded composite chassis offers the perfect factory fit and durability you expect from ARRMA. 🔧 Features: ✅ Official replacement chassis for the Mojave Grom✅ Durable composite construction for strength and reliability✅ Precision fitment for easy installation 📦 Includes: (1) Mojave Grom Composite Chassis 🚗 Compatibility: • Arrma Mojave Grom

Read more less

Keep your steering sharp and your servo protected with the Arrma Grom Servo Saver Set. Designed as a direct replacement for stock components, this set offers a precise fit and easy installation on multiple 1/18 and 1/12 scale platforms. 🔧 Features:✅ Direct replacement for stock servo saver✅ Protects your servo during impacts✅ Factory-installed on Grom series and Losi NASCAR✅ Precision fit for quick and easy install 📦 Includes:(1) Servo Saver Set 🚗 Compatibility:• Arrma Granite Grom• Arrma Mojave Grom• Arrma Typhon Grom• Losi 1/12 NASCAR Race Car

Read more less

Give your Mojave Grom a fresh look or replace damaged parts with this official Arrma Mojave Grom Bumper Set. Designed for durability and a precise fit, this set includes both front and rear bumpers to keep your rig protected during the roughest runs. 🔧 Features:✅ Direct replacement for factory bumpers✅ Includes both front and rear bumpers✅ Molded for durability and impact resistance✅ Precision fit for easy installation 📦 Includes:(1) Front Bumper(1) Rear Bumper 🚗 Compatibility:• Arrma Mojave Grom

Read more less

Pro-Line Badlands MX Pre-Mounted 1/8 Buggy Tires are known for having sweet Motocross inspired tread and the Badlands MX tires kick that up a notch with a Bigger and Bolder knobby tread that matches modern MX tire design. The Badlands MX is a true All-Terrain tire that will find traction on any surface but is best suited for loose & loamy dirt, mud, or grass. The Badlands MX Tire is pre-mounted on Mach 10 Black Wheels so you don't have to worry about gluing your own tires or waiting for them to dry. All you need to do is slap them on your buggy and get to ripping up the dirt! The Mach 10 features 10 aggressive spokes that will make your off-road bash buggy look fast even sitting still. The Mach 10 wheels have a 17mm hex and are made from a single molded piece of high-quality Nylon proudly produced by Pro-Line in the USA!    Pro-Line Badlands MX All Terrain 1:8 Buggy Tires     Features: Tire: Awesome Motocross-Inspired Appearance Bigger, Bolder, and Badder than Ever Incredible Traction on Loose, Loamy or Muddy Terrain Improved Wear Resistance Combined with Modern Style Made from Pro-Lines Legendary M2 Race Rubber Less Time Gluing and More Time Having Fun Made in the USA, since 1982 - Read about Pro-Line Racing's History Wheel: Greater Stability and Connectivity For Use on Standard 17mm 1:8 Hexes Extremely True Finish Made from High Strength DuPont Nylon Wheels Also Available Un-Mounted Specifications: Height: 4.60" (117mm) Width: 1.72" (44mm) Includes: (2) Pre-mounted Badlands MX Tires Mounted on Black Mach 10 Wheels 

Read more less

Arrma Differential Cover Set (2-Pack) Protect & Maintain Your Differential The Arrma Differential Cover Set is a direct replacement part designed for Arrma Grom series vehicles and Losi NASCAR models. Built for durability and precision fit, these covers help protect your differential from dirt, debris, and damage, ensuring smooth and reliable performance on any terrain. Includes: ✅ (2) Differential Covers✅ Mounting Hardware Compatibility: ✔ Arrma Granite Grom✔ Arrma Mojave Grom✔ Arrma Typhon Grom✔ Losi NASCAR

Read more less

Keep your suspension tight and responsive with the Arrma 2.5x24mm Hingepin Set. Built from high-quality steel, these pins are designed as direct replacements for worn or damaged stock components, ensuring smooth suspension performance and long-lasting durability. ⚡ Features: Precision steel construction Direct replacement for stock kit components Provides smooth, consistent suspension movement Strong and durable for extreme RC action 📦 Includes: (4) 2.5x24mm Hingepins Part #: ARA320751

Read more less

The ARRMA Input Gear Set is a genuine replacement part designed to keep your drivetrain running strong. Built for durability and smooth power transfer, this set ensures your vehicle stays reliable under racing and bashing conditions. ⚡ Features: Precision-machined for smooth gear mesh Durable steel construction for long life Direct replacement for factory parts Designed for consistent performance under load 📦 Includes: (1) Input Gear Set Compatibility: ARRMA GROM 1/12 Losi NASCAR RC Race Car Part #: ARA311182

Read more less

The Arrma Wheel Axle Set is a genuine OEM replacement that restores smooth and reliable drivetrain performance. Precision-machined from durable steel, these 8x45mm axles are built to withstand the demands of high-power bashing and racing. ✅ Heavy-Duty Steel – Built for strength and durability✅ Precision Fit – Ensures smooth power transfer to the wheels✅ Direct OEM Replacement – Genuine Arrma part for easy servicing Includes: (2) 8x45mm Wheel Axles – Part #ARAC9421 Compatibility: Available for many Arrma 6S BLX / EXB vehicles — check your manual for exact fitment Part #: ARAC9421

Read more less

The Arrma Shock Mount Pin Set is a genuine OEM replacement designed to keep your shocks securely mounted. Made from strong silver-finished steel, these 3x33mm pins provide durability and precise fitment for reliable suspension performance. ✅ Durable Steel Construction – Built to handle hard bashing and big landings✅ Silver Finish – Factory look with corrosion resistance✅ Direct OEM Replacement – Genuine Arrma part for perfect fit Includes: (4) Shock Mount Pins, 3x33mm Silver Compatibility: Available for many Arrma 6S BLX / EXB vehicles — check your manual for exact fitment Part #: ARA713032

Read more less

The Arrma High Torque Slider Servo Saver Set is a genuine OEM replacement designed to keep your steering system strong and reliable. Built from durable materials, this set provides precise fitment and high torque capacity, ensuring consistent steering performance even under extreme 6S power. ✅ High Torque Design – Handles the demands of powerful servos✅ Durable Construction – Built for long-lasting reliability✅ Direct OEM Replacement – Genuine Arrma part for perfect fitment Includes: Complete high torque slider servo saver set Compatibility: Available for many Arrma 6S BLX / EXB vehicles — check your manual for exact fitment Part #: ARA340204

Read more less

The Arrma Ball End Set is a genuine OEM replacement that restores smooth steering and suspension performance. Made from high-quality composite material, this set includes a selection of steering, camber, and sway bar link ball cups to keep your vehicle handling like new. ✅ Durable Composite Build – Tough enough for extreme RC use✅ Complete Set – Includes steering and rear ball cups for multiple linkages✅ Direct OEM Replacement – Perfect fit for easy servicing Includes: (2) Curved Steering Ball Cups (2) Straight Steering Ball Cups (4) Rear Ball Cups Compatibility: Available for many Arrma 6S BLX / EXB vehicles — check your manual for exact fitment Part #: ARA330817

Read more less