Team Associated RC10B6.2 Rear Suspension Arm, 73mm   ASC91853

Read more less

Team Associated B6 Laydown Idler Gear (39T) (91716)Keep your laydown transmission running smooth with these genuine Team Associated 39T idler gears. Designed for the RC10 B6, B6.1, and B6.2 series buggies with a laydown setup, these are the direct replacements you need for peak drivetrain performance. Includes: (2) 39T Idler Gears Compatibility: RC10 B6 RC10 B6.1 RC10 B6.2 (with laydown transmission)

Read more less

Team Associated RC10B7 Front Anti-Roll Sway Bars (5) [92459] 🌀 Precision in the Front, Grip in the Back!Upgrade your front-end handling with the Team Associated RC10B7 Front Anti-Roll Sway Bar Set. Whether you're fighting traction roll or just fine-tuning your buggy for max consistency, this 5-pack of sway bars gives you the tuning range you need to dominate any surface. Built for the RC10B7 and B7D platforms—just swap, test, and race! 🔧 Key Features:✅ Five sway bar options for ultimate front-end tuning🔄 Designed specifically for RC10B7 and B7D🎯 Helps maintain front grip and stability through corners🏁 Race-proven setup flexibility 📦 Includes:(5) Front Anti-Roll Sway Bars 🔩 Part Number: 92459🛠️ Compatible With: Team Associated RC10 B7 Team Associated RC10 B7D

Read more less

Super powerful double-sided adhesive tape

Read more less

Traxxas Rear Stub Axle Carriers (2)Part #: 1952 Restore Performance. Reinforce Reliability.Keep your Traxxas rig running smooth with this replacement set of rear stub axle carriers. Designed for durability and a factory-fit finish, these carriers restore precise handling and support to your rear suspension. Whether you're rebuilding or upgrading, this set delivers the strength your setup needs. Features: Genuine Traxxas replacement part Designed for 2WD Traxxas models like Rustler, Slash, and Stampede Made from durable composite for long-lasting use Maintains factory geometry and alignment Includes: (2) Rear Stub Axle Carriers Bolt on confidence with Traxxas quality and get back to tearing up the track.    

Read more less

Traxxas Steering BellcranksPart #: 3743 Restore precise steering control with this genuine Traxxas replacement bellcrank set. Designed for 2WD Traxxas models, this kit includes everything you need to refresh your steering assembly and keep your RC vehicle tracking straight. Features: Direct replacement for worn or damaged steering components Durable composite construction Ensures smooth, responsive steering action Designed for Traxxas 2WD models Includes: (1) Right Bellcrank (1) Left Bellcrank (1) Drag Link  

Read more less

1up Racing Lockdown Adjustable Bullet Plugs – Tool-Free Power, Trackside Ready 🔧 Say goodbye to wobbly connections and clunky installs — the Lockdown Bullet Plugs by 1up Racing are here to redefine how you power your RC car. These are the world’s first fully tool-free adjustable bullet plugs, delivering max efficiency, minimal resistance, and an unbeatable fit — all with just a twist. 💡 With an innovative compression-fit system and eye-catching finishes, these aren’t just bullet plugs — they’re an upgrade in performance and style. ✨ Key Features: 🔧 Tool-Free Adjustable Design – Get a perfect fit in 5mm or 4mm sockets without a single tool⚡ Low Resistance, High Efficiency – Maximize power transfer from battery to ESC🌀 Easy-Grip Thumb Screws – Fast install, secure lock-in every time📏 Ultra-Low Profile – Only 8mm tall when installed (shorter than 1up Heatsink Bullets)🖤 Dual-Tone Style – 10 bold anodized colors for the positive plug, with a sleek black negative🌟 Mirror-Like Chamfer & Deep Laser Engraving – Looks as good as it performs💪 Lightweight & Durable – Built for serious racers who demand reliability 📦 What’s in the Box? ✔️ (2) Lockdown Adjustable Bullet Plugs (1x Positive Color, 1x Black Negative) 📌 Note: Installed height may vary slightly depending on your battery terminal’s snugness. Looser terminals = lower thumb screw depth. 🏁 Don’t Get Caught Slippin’ – Lock In with 1up! When every millisecond counts, 1up Racing’s Lockdown Bullet Plugs deliver unmatched grip, power, and pit-lane convenience. No tools, no fuss — just pro-grade power transfer and personalized style. 💡 Upgrade to Lockdown Plugs – Because “Good Enough” Ain’t Fast Enough.

Read more less

Meet the EcoPower WP173 — a high-voltage, high-torque, high-speed aluminum micro servo built to dominate the 1/16 & 1/18 scale world. Waterproof, fully metal-geared, and engineered for precision, this servo is the ultimate upgrade for Traxxas®, Axial®, Losi®, Arrma® Grom™, TRX-4M™ (with mount), and more. Designed for brutal performance and long-term durability, the WP173 packs a coreless motor, an aluminum case, and torque numbers that punch way above its size. High-Performance Speed & Torque Whether you're racing, crawling, or bashing, the WP173 delivers lightning-fast response and incredible power: Speed: 0.09 sec/60° @ 6.0V 0.07 sec/60° @ 8.4V Torque: 123 oz-in @ 6.0V 173 oz-in @ 8.4V Smooth, crisp control — even under heavy load. Built for Abuse This servo is ready for the rough stuff: Full metal gear train Waterproof aluminum case Ball-bearing supported output Includes aluminum servo horn Long-lasting durability for harsh environments Wide Compatibility A true drop-in powerhouse for most micro platforms: Arrma® Grom Series:Gorgon • Granite • Mojave • Quake • Typhon Axial:1/18 Yeti Jr FMS:FCX18 • FCX24 • FCX24M Furitek:Cayman • Cayman Pro • FX118 • Gold Digger • Hiroyama • TerraX Losi:Mini Drag • Mini-B • Mini-T 2.0 • NASCAR Redcat:Ascent-18 Traxxas:TRX-4M™ & TRX-4MT™ (Requires EcoPower CNC Aluminum Servo Mount ECP-3072) Features: High torque + high speed performance Waterproof aluminum case Digital coreless motor Full metal gear construction Aluminum servo horn included 25-tooth output shaft (standard micro) Operates from 6V–8.4V Compact size for 1/16 & 1/18 models Built for racers, crawlers, and bashers Includes: (1) EcoPower WP173 Aluminum Digital Micro Servo (1) Aluminum Servo Horn (2) Composite Servo Horns Mounting Hardware Specifications: Application: 1/24, 1/16, 1/18 Input Voltage: 6V–8.4V Speed: 0.09 sec/60° @ 6.0V 0.07 sec/60° @ 8.4V Torque: 123 oz-in @ 6.0V 173 oz-in @ 8.4V Motor: Digital Coreless Output Shaft: 25T • 5mm Gear Material: Metal Dimensions: 23 × 12 × 31.75mm Weight: 23g Tech Notes: Do not exceed 8.4V. Waterproof, but prolonged submersion may weaken seals. TRX-4M platforms require the EcoPower ECP-3072 Aluminum Servo Mount.

Read more less

  Factory Fit. Maximum Strength. Keep your monster truck battle-ready with the Traxxas X-Maxx Front Lower Bulkhead, a genuine factory replacement part built for precision fit and lasting durability. Designed specifically for the Traxxas X-Maxx, this component anchors your truck’s suspension and drivetrain for optimal alignment and impact resistance — keeping your rig tough through every bash session. Built Traxxas Tough Crafted from high-strength composite material, the front lower bulkhead provides the perfect balance of rigidity and flex to absorb hard landings and heavy impacts. Whether you’re rebuilding after a crash or reinforcing your setup, this part restores factory-level performance and structural integrity. Features: Genuine Traxxas factory replacement part High-strength composite construction for durability Maintains precise suspension and drivetrain alignment Designed for easy installation and perfect fit Built to withstand the power and weight of the X-Maxx Includes: (1) Front Lower Bulkhead Compatibility: Traxxas X-Maxx Traxxas Tough — Built Strong. Bash Hard.

Read more less

Precision Steering. Proven Durability. Refresh or upgrade your steering setup with the Team Associated V2 Caster & Steering Blocks Set, designed specifically for the RC10T7 and RC10SC7 platforms. Built with Factory Team precision, these components deliver smooth steering response, consistent caster geometry, and the toughness to handle intense race conditions. V2 Performance Upgrade The updated V2 design refines steering feel and durability for improved handling and corner-entry precision. Whether you’re maintaining your race truck or tuning for optimal performance, these blocks keep your setup tight, aligned, and race-ready. Features: Genuine Team Associated V2 design for RC10T7 / RC10SC7 Provides precise steering response and consistent caster angle Durable composite construction built for high-stress racing Factory Team engineered for reliability and fit Includes: (1) RC10T7 V2 Caster & Steering Blocks Set Compatibility: Team Associated RC10 SC7 Team Associated RC10 T7 Team Associated Factory Team — Engineered to Win.    

Read more less

Smooth. Precise. Reliable.Keep your Arrma Grom-series vehicles running flawlessly with genuine Arrma 7x11x3mm Ball Bearings (ARA610053). These high-quality bearings reduce friction, improve drivetrain efficiency, and extend the life of your gears and shafts—essential for smooth, consistent performance on every run. Factory Fit. Race Ready.Each bearing is precision-sealed to resist dirt and moisture while maintaining low rolling resistance. Perfect as direct replacements for worn or gritty stock bearings, they’re built for long-lasting durability in both on-road and off-road conditions. 💪 Features: Genuine Arrma replacement part Precision-sealed bearings for smooth rotation and protection against debris Reduces drivetrain friction and wear Ideal for high-speed, high-load applications Direct fit for Grom-series vehicles 📦 Includes: (4) 7x11x3mm Ball Bearings ✅ Compatibility: Arrma Gorgon Grom Arrma Granite Grom Arrma Mojave Grom Arrma Quake Grom Arrma Typhon Grom Losi NASCAR    

Read more less

  Achieve pro-level setup accuracy with the JConcepts Aluminum Ride Height Gauge. Machined from billet aluminum, this high-spec tool provides precise measurements from 10–40mm, making it a must-have for competitive off-road racers. With laser-etched markings, smooth pivoting action, and a secure thumbscrew lock, this gauge ensures your ride height adjustments are consistent and repeatable. 🔥 Key Features: Precision-machined from billet aluminum Available in Blue (JCO2282-1) or Black (JCO2282-2) anodizing Laser-etched graduated scale from 10mm–40mm Rounded boss touch point for accurate chassis contact Chamfered silver edging highlights the design Pre-assembled with 4mm pivot hardware & 3mm thumbscrew Includes a latched storage box with foam insert for protection ✅ Compatibility: Works with a wide variety of 1/10 and 1/8 scale on-road and off-road vehicles Ideal for buggies, trucks, and touring cars (TC6/TC7 series) Suitable for any chassis requiring precise ride height adjustments within 10–40mm 📦 Includes: (1) JConcepts Ride Height Gauge (choose Blue or Black) (1) Latched Storage Box with Foam Cushion ⚠️ Tip:Most racers prefer to set ride height with a slight gap (~0.5mm) between the chassis and gauge for best performance.

Read more less

Fine-tune the rear suspension of your RC10B6.3 with the Wide “C” Arm Mount from Team Associated. Made from high-quality aluminum for added strength and precision, this Factory Team upgrade delivers improved durability and consistent geometry for high-performance setups. 🔥 Key Features: Factory Team aluminum arm mount for increased rigidity Wide “C” mount geometry for specific rear pivot configurations CNC-machined for precise fit and performance Hard-anodized finish for wear resistance and professional look Perfect for racers needing a durable, race-ready upgrade ✅ Compatibility: RC10B6.3 RC10B6.3D Also fits other RC10B6-series vehicles using the wide C arm mount configuration 📦 Includes: (1) Aluminum Arm Mount C (Wide) ⚠️ Tip:Pair with the correct A/B/D mounts to achieve your desired anti-squat and toe-in settings.

Read more less

  Overview:Add strength and style to your build with the Traxxas 5mm Aluminum Flanged Nylon Locking Nuts. Machined from lightweight aluminum and equipped with nylon inserts, these locknuts stay tight under vibration and high loads while reducing rotating mass. Available in four bold anodized colors, they’re a perfect mix of performance and looks. Features: Set of 4 flanged M5 locknuts Machined from durable, lightweight aluminum Nylon insert for secure, vibration-resistant fit Flanged design distributes load for better holding power Available in Blue, Red, Green, or Black anodized finishes Genuine Traxxas factory hardware Compatibility: Fits Traxxas models using 5mm wheel nuts, including: X-Maxx Maxx E-Revo VXL Brushless E-Revo 2.0 XO-1 Other Traxxas vehicles requiring 5mm locknuts (check manual) Includes: (4) 5mm Aluminum Flanged Nylon Locking Nuts – selected color Part Number: 8447

Read more less

The Triad Direct Drive System is designed for stock-class racers looking to eliminate the slipper clutch and reduce rotating mass for maximum efficiency. By removing the entire clutch assembly, this system delivers zero slip (other than the differential) and a more direct throttle feel in conditions where ultimate drivetrain efficiency matters. This is the lightest direct drive system on the market, weighing 6.45g with a 72T spur and just 2.62g without a spur. ⚠️ Note: Spur gear is NOT included. This option is intended for racers who already own Triad spur gears. Product Details Direct drive system for stock-class racing Eliminates slipper clutch and rotating mass Zero slip drivetrain (except differential) Lightest direct drive system available All-aluminum construction No small screws to lose during maintenance Custom M3x48 aluminum screw allows clean install and easy return to a slipper setup if desired Works exclusively with Triad spur gears (spur not included) Includes Direct Drive aluminum plate M3x48 aluminum screw Aluminum hat bushing Aluminum cone washer M3 aluminum nut Fitment Team Associated B7 Important Notes Not recommended for all drivers Best suited for experienced stock racers Install is the same as B6.1 (reference Triad Direct Drive assembly instructions) A purpose-built option for racers chasing every gram and every advantage. 🏁 💡 Pro Tip: Direct drive setups aren’t for everyone — but on stock classes and high-grip tracks, removing the slipper can give you a noticeable edge in efficiency and throttle response.  

Read more less

The ultimate tool for hobbyists, techs, and DIY pros! Compact, powerful, and USB rechargeable, the BOOF RC Power2 makes quick work of all your precision screwdriving tasks. 🔧 Dual-position handle – switch between straight or pistol grip for tight spaces🔧 Forward/Reverse control for quick tightening or removal🔧 Cordless design with built-in LED light for visibility in dark spots🔧 USB rechargeable – plug into your laptop, power bank, or car charger🔧 Includes 5 long bits, USB cable & 269g lightweight driver Perfect for:• RC builds & repairs• Home assembly & upgrades• On-the-go fixes 📦 Includes:(1) Electric Screwdriver(5) Long Bits(1) USB Charging Cord Ready when you are. Built BOOF tough. 💪

Read more less

Restore durability and strength to your Losi Mini with the Mini-T 2.0 Front Bulkhead & Brace Set. Whether you’re rebuilding after a crash or upgrading for extra toughness, this factory replacement part is built to handle backyard bashing and track-day action. 🔧 Features:✅ Genuine Losi replacement part for perfect fitment✅ Includes front bulkhead and two braces✅ Tough composite construction for durability✅ Easy to install with existing hardware 📦 Includes:• (1) Front Bulkhead• (2) Front Braces 🚗 Compatibility:• Losi Mini-T 2.0• Losi Mini-B

Read more less

These replacement front suspension arms are designed specifically for the Team Associated RC10B7 1/10 scale buggy. Built for strength and precision, they help maintain proper geometry and smooth suspension movement for peak performance on the track. ✅ Includes:• (2) Front Suspension Arms📦 Part Number: 92410🔧 Compatibility: RC10B7

Read more less

Team Associated RC10B74 Differential Gasket & O-Rings – ASC92133🛠️ Keep It Sealed. Keep It Smooth. Maintain peak diff performance with this genuine Team Associated Differential Gasket & O-Ring Set for your RC10B74. Whether you're doing routine maintenance or a full rebuild, these factory-replacement parts help ensure a proper seal and smooth, consistent action. ✅ Perfect fit for RC10B74 front, center, or rear diffs✅ Helps prevent leaks and maintains consistent fluid pressure✅ Made from high-quality materials for long-lasting performance 📦 Includes:• (1) Differential Gasket• (2) 5x1.5mm O-Rings 🔢 Part Number: ASC92133🏁 Brand: Team Associated

Read more less

This is pack of Team Associated Differential Cross Pins, intended for use with the Team Associated RC10 B74 Team 1/10 4WD Off-Road Electric Buggy as a replacement for the kit supplied part. Includes: (2) Differential Cross Pins  (2) 2x9mm Dowel Pins COMPATIBILITY: Team Associated RC10 B74 OriginalTeam Associated RC10 B74.1Team Associated RC10 B74.1DTeam Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

Team Associated RC10B7/B7D Factory Team Aluminum One-Piece Servo Mount (Blue) [92456] 💙 Lock It Down. Steer with Precision.Take your B7 or B7D to the next level with the Factory Team One-Piece Servo Mount! Crafted from ultra-light, tough-as-nails aluminum and finished in anodized blue with crisp chamfers and a laser-etched FT logo, this upgrade is all about flex-free performance and next-level style. Say goodbye to servo slop and hello to razor-sharp steering! 🔧 Upgrade Highlights:✅ One-piece flex-free design = increased steering precision🎯 Factory Team anodized finish with machined highlights💪 CNC aluminum construction—lightweight + durable✨ Laser-etched FT logo for pro-level bling 📦 Includes:(1) Blue Factory Team One-Piece Servo Mount 🔩 Part Number: 92456🚗 Compatible With: Team Associated RC10B7 Team Associated RC10B7D

Read more less

Traxxas Aluminum Slipper Shaft Bearing Adapter w/Bearing – Part #6893X (Blue) / 6893G (Green)💪 Upgrade Durability. Elevate Performance. Boost your drivetrain with the Traxxas Aluminum Slipper Shaft Bearing Adapter. Available in anodized blue or green, this precision-machined upgrade delivers enhanced strength and improved heat dissipation compared to the stock plastic adapter. Ideal for high-performance setups in your Slash 4X4 or Stampede 4X4. ✅ CNC aluminum construction for added durability✅ Includes 10x15x4mm rubber-sealed bearing✅ Helps maintain slipper clutch alignment under load✅ Compatible with Traxxas Slash 4x4 and Stampede 4x4✅ Choose from Blue (6893X) or Green (6893G) 📦 Includes:(1) Aluminum Bearing Adapter(1) 10x15x4mm Sealed Bearing  

Read more less

Boof RC Adapter – TRX-Style Male to XT60 Female (14AWG, 5cm) Need to connect your TRX-style battery to an XT60 charger or ESC? This compact Boof RC adapter makes the conversion effortless. Built with 14AWG silicone wire and a short 5cm length for a clean, efficient setup. ✅ TRX-style (male) to XT60 (female)✅ Compact 5cm length—perfect for tight spaces✅ Durable 14AWG flexible silicone wire✅ Great for chargers, ESCs, and adapter setups✅ Plug and play—no tools needed 📏 Wire Gauge: 14AWG📐 Length: 5cm🔌 Connector Type: TRX-Style Male to XT60 Female 💡 Boof Tip: Keep one in your pit box to bridge your TRX packs with XT60-based gear—no rewiring required!

Read more less

  Traxxas X-Maxx 17mm Splined Wheel Nuts (4) – Part 7758Lock In Power. Add a Pop of Color. The Traxxas 17mm Splined Wheel Nuts (7758) are designed specifically for the X-Maxx, offering a secure, no-slip hold on your wheels—even under extreme torque. With a unique splined design and anodized aluminum finish, these nuts add both function and style to your build. ✅ Set of 4 aluminum splined wheel nuts✅ 17mm fitment – designed for the X-Maxx✅ Splined design – extra grip to prevent wheel spin and stripping✅ Durable anodized finish – built for abuse and corrosion resistance✅ Available in 6 bold colors: Blue, Green, Red, Orange, Black, and Gray✅ CNC-machined aluminum – lightweight and strong 📦 Includes: (4) 17mm Splined Wheel Nuts Part #: 7758 Choose your color: Blue, Green, Red, Orange, Black, or Gray 💡 Pro Tip: Use matching aluminum accents like hubs or caps to complete the look and protect key components.  

Read more less

Traxxas Shock Rebuild Kit (2 Shocks) Part #: 2362 Keep your suspension smooth and leak-free with the Traxxas Shock Rebuild Kit. This handy kit includes all the necessary parts to refresh two shocks, restoring their performance and reliability after hard runs and bashing sessions. ✅ Features: Rebuilds two shocks Compatible with most Traxxas ultra shocks Perfect for routine maintenance or repair Helps eliminate leaks and improve damping consistency 📦 Includes: (4) Silicone O-rings (2) Rubber Diaphragms (2) C-Clips (2) Spacers 🛠️ Maintain peak performance by keeping your shocks dialed in — a must-have in every Traxxas toolbox!

Read more less

Team Associated 23mm Carbon Fiber Front Shock Tower – RC10B74.1 Lightweight. Strong. Race-Ready. The RC10B74.1 23mm Carbon Fiber Front Shock Tower is a precision-cut replacement part designed specifically for Team Associated B74.1 and B74.1D 1/10 scale 4WD buggies. Crafted from high-quality carbon fiber, it offers strength without the weight—essential for competitive performance. ⚙️ Features: 🪶 Lightweight carbon fiber construction 🛡️ Durable and race-proven material 📏 23mm shock mounting geometry for consistent front-end handling 📦 Includes: (1) 23mm Carbon Fiber Front Shock Tower ✅ Compatibility: Team Associated RC10B74.1 Team Associated RC10B74.1D Upgrade your buggy’s performance with official Team Associated components.

Read more less

Upgrade your steering system with the perfect combo:the INJORA Aluminum Servo Saver (25T) paired with the INJS11 High-Voltage Coreless Servo. This setup provides a massive improvement in durability, precision, response, and overall steering authority for the Arrma Grom platform and 1/12 Losi NASCAR. The CNC-machined saver protects your servo while delivering tight, accurate steering, while the INJS11 packs high torque and fast response in a compact aluminum case. ⭐ Compatible With 1/12 Losi NASCAR 1/14 Arrma Typhon Grom 1/16 Arrma Mojave Grom 1/18 Arrma Granite Grom Arrma Gorgon Grom Arrma Quake Grom ⚠️ Important Notes ❌ Not compatible with INJS2065 servo ❌ Not compatible with Mojave Grom stock 20T servo ✔ Must be centered via your transmitter during installation ✔ This SKU includes BOTH the servo saver and the INJS11 servo Included in This Combo Set 1️⃣ INJORA Aluminum Servo Saver — GROM-11BK Features CNC machined for perfect spline fit Lightweight alloy construction Increased durability and steering precision Sleek anodized finish Weight: 3.4g Spline Size: 25T 2️⃣ INJORA INJS11 High-Torque Coreless Servo (25T) Servo Specifications Operating Voltage: 6V – 8.4V Torque: 8kg-cm @ 6V 9.5kg-cm @ 7.4V 11kg-cm @ 8.4V Speed: 0.106"/60° @ 6V 0.085"/60° @ 7.4V 0.074"/60° @ 8.4V Gear Material: Stainless steel Motor Type: Coreless Spline: 4.9mm Mini 25T Bearing: Dual ball bearing Dimensions: 32 × 12 × 27mm Weight: 21g 💥 Why Buy This Combo? Perfect servo + saver compatibility (both 25T) Huge upgrade in steering torque and accuracy More durability for off-road abuse Ideal for racers or bashers running upgraded tires/power Turn-key installation

Read more less

Dial in your aero and add a clean, pro finish to your 1/10 RC build with BOOF RC Wing Washers.These lightweight aluminum washers reinforce your wing mounting points, preventing cracks, pull-through, and premature wear — especially on high-downforce setups. Designed for racers who want performance, durability, and style without paying premium brand prices. Features: ✔️ Lightweight Aluminum Construction – Strong and low-mass for optimal wing support ✔️ Reduces Wing Damage – Prevents cracking and screw pull-through ✔️ CNC Machined Finish – Clean fitment with a premium look ✔️ Multiple Color Options – Customize your style ✔️ Easy Bolt-On Upgrade – Works with standard 1/10 wing hardware Specs: Fitment: 1/10 RC (buggy, touring, drift, basher) Material: Aluminum Hardware: M3 mounting compatible Pack: 2pcs (one pair) Available Colors: 🟥 Red⬛ Black🩶 Titanium🟦 Royal Blue🩵 Light Blue 🟩 Green🟪 Purple⭐ Gold🤍 Silver (Availability may vary) In the Pack: (2) BOOF RC Aluminum Wing Washers Perfect For: 1/10 Buggies 1/10 Touring & Drift High-downforce setups Bashers that break wings often Why BOOF RC? Affordable, clean, functional upgrades — without the silly markup.  

Read more less

  Give your brushless system the reliability and protection it deserves with the ProTek RC Braided Sensor Cable. Designed for high-performance RC setups, this premium cable ensures smooth, accurate communication between your ESC and motor — even in the most demanding conditions. Overview The ProTek RC braided sensor cable features flexible silicone-insulated internal wires protected by a rugged black nylon braided sheath. Heat-shrink reinforcement on both ends secures the braid, prevents wear, and keeps the harness stable through constant chassis flex and vibration. The result is a durable, smooth-bending sensor cable that maintains consistent signal integrity for peak motor performance. Compatible with any sensor-based brushless motor system that uses a standard replaceable 6-wire sensor harness. Features Tough nylon braided outer sheath for maximum protection Silicone-shielded internal wires Heat-shrink reinforced ends Flexible, shock-absorbing design Maintains clean and stable ESC–motor data transfer Compatible with all standard 6-wire brushless systems Ideal for racing or high-performance applications Includes (1) ProTek RC Braided Brushless Motor Sensor Cable — 200mm  

Read more less

Upgrade your brushless setup with the ProTek RC Braided Sensor Cable — built for durability, flexibility, and ultra-reliable data transfer between your ESC and motor. Whether you're racing or bashing, this premium sensor cable ensures clean communication and long-lasting performance. Overview The ProTek RC braided sensor cable uses flexible silicone-shielded internal wires wrapped in a tough nylon braided outer sheath for maximum protection. Heat-shrink ends secure the braid and reinforce the connection points, preventing damage or fraying. This creates a smooth-bending, shock-absorbing cable that maintains consistent sensor accuracy under extreme chassis movement. Perfect for any sensor-based brushless system that uses standard replaceable sensor harnesses. Features Durable black braided nylon outer sheath Silicone-shielded internal sensor wires Heat-shrink reinforced ends for long life Flexible, shock-absorbing design Ensures clean and consistent ESC–motor data transfer Compatible with all standard brushless systems using 6-wire sensor leads Great upgrade for racing applications Includes (1) ProTek RC Braided Brushless Motor Sensor Cable — 150mm

Read more less

Precision. Strength. Performance. Take your power delivery to the next level with the Traxxas Hardened Steel Mod 1.0 Pinion Gear (18T). Engineered for extreme torque and high-speed brushless systems, this durable gear provides smooth, reliable power transfer and long-lasting wear resistance. Designed with a 5mm bore and Mod 1 tooth pitch, it’s built to handle the most demanding setups. Built for Brutal Power Systems Perfect for high-output platforms like the X-Maxx, XRT, and E-Revo VXL 2.0, this pinion gear features precision-cut hardened steel teeth that maintain accurate gear mesh under extreme loads. Whether you’re bashing, racing, or chasing top speed, it keeps your drivetrain performing flawlessly run after run. Features: Hardened steel construction for maximum durability Mod 1.0 pitch for high-power brushless applications 5mm bore fits standard motor shafts on large-scale Traxxas models Precision-machined teeth for smooth and efficient power transfer Includes set screw for secure installation Genuine Traxxas factory quality Includes: (1) 18T Hardened Steel Mod 1.0 Pinion Gear (1) Set Screw Compatibility: Traxxas E-Revo VXL 2.0 Traxxas Maxx Traxxas X-Maxx Traxxas XO-1 Traxxas XRT  

Read more less

  Precision and reliability come standard with the RC10B74 Steering Blocks from Team Associated. Designed for durability and consistent performance, these blocks are a direct fit for your RC10B74 front-end steering assembly. 🔧 Key Features: OEM replacement for stock steering blocks Molded composite construction for long-lasting strength Maintains factory geometry and performance Lightweight yet rugged design 📦 Includes: (2) Steering Blocks (left and right) ✅ Compatibility: Team Associated RC10B74 May fit other RC10B74 variants (consult manual for fitment) Restore your steering performance or keep a spare set in your pit bag—these steering blocks are an essential component for smooth, responsive control on the track.

Read more less

Boost steering precision and durability with the LC Racing Aluminum Steering Bellcrank. CNC-machined from high-quality aluminum, this upgrade provides a rigid, flex-free connection between your servo and steering components for sharper handling and longer-lasting performance. Features: CNC-machined aluminum for maximum strength and precision Increased rigidity for more accurate steering response Anodized finish for corrosion resistance and a premium look Direct replacement for stock bellcrank on compatible LC Racing models Includes: (1) Aluminum Steering Bellcrank Assembly Perfect for racers looking to tighten up steering feel and enhance reliability.  

Read more less

JConcepts 12mm Hex Mono 2.2" Front Wheels (4) – Yellow or WhitePart Numbers: JCO3347Y (Yellow), JCO3347W (White) Upgrade your 1/10 buggy with these JConcepts Mono 2.2" Front Wheels, designed for performance, durability, and style. Available in bright white or fluorescent yellow, these wheels feature popular dish-style detailing and are molded using an advanced manufacturing process for maximum precision and strength. Perfect for racers running Team Associated B5, B5M, B4.1, or Kyosho RB5 platforms with 12mm hex conversions, these wheels offer great fitment, longevity, and modern styling. 🔧 Key Features: Fits: Team Associated B4.1/B5/B5M/B4.2 (w/ adaptors), Kyosho RB5 (direct fit) Quantity: 4 wheels per pack Color Options: White (JCO3347W), Yellow (JCO3347Y) ROAR-legal sizing with a dish-style concave design 12mm hex mount Vented design improves glue adherence Made from durable, race-proven material 🛠️ Compatibility Notes: For B4.1: Requires JConcepts clamping hexes (front/rear) and Team Associated hex conversion For Kyosho RB5: Use locking-style rear wheel nuts (JC #2089 Blue or #2090 Black) Designed for standard (wide) front-end configuration Will not work properly with narrow setups or without locking nuts on RB5 Specs: Feature Detail Position Front Diameter 2.2" Hex Size 12mm Quantity 4 Wheels Scale 1/10 Buggy Color Options White / Yellow Vehicle Type 2WD Buggy Bring style and performance to your front end with the JConcepts Mono wheels—perfect for racers who demand precision and durability on the track.

Read more less

Light up the trail in style! The Traxxas 8026X LED Rock Light Kit is the perfect upgrade for your TRX-4 or TRX-6, adding awesome underbody lighting to enhance realism and visibility during nighttime adventures. 🔦 Features: Bright LED rock lights for enhanced scale appearance Perfect for crawling in low-light conditions Designed specifically for Traxxas TRX-4 and TRX-6 trucks Durable and waterproof for rugged off-road use 📦 Includes: (1) LED Rock Light Kit ⚠️ Note: Requires TRA8028 power supply module Compatible with inner fenders TRA8018, TRA8072, or TRA8080 Bring your crawler to life after dark—an essential scale accessory for serious trail rigs!

Read more less