Traxxas Maxx Battery Hold-Down w/ Mounts – Part 8919Keep It Locked Down. Factory Fit for the Standard Maxx. The Traxxas Battery Hold-Down Set (8919) is a direct replacement for the standard wheelbase Traxxas Maxx. Designed to keep your battery secure through rough terrain, big air, and high-speed runs, this complete kit includes all the mounting hardware and foam padding you need for a snug fit. ✅ Fits standard Traxxas Maxx chassis✅ OEM replacement hold-down system – direct bolt-on✅ Durable composite construction – made to last✅ Foam pads included – protects battery and reduces movement✅ Front and rear mounts with spacers – complete install solution 📦 Includes: (1) Battery Hold-Down (1) Front Mount (1) Rear Mount (2) Battery Compartment Spacers (2) Foam Pads Part #: 8919 💡 Pro Tip: Keep a second hold-down kit on hand when running different-sized packs — swap and go based on your setup.

Read more less

Traxxas Maxx Battery Hold-Down w/ Mounts (352mm Wheelbase) – Part 8919RSecure Your Power. Designed for the Extended Chassis. The Traxxas Battery Hold-Down with Mounts Set (8919R) is a direct replacement for Maxx trucks equipped with the extended 352mm wheelbase chassis. This complete set ensures your battery stays firmly in place, even during aggressive runs, big jumps, and rough terrain. ✅ Designed for extended 352mm Maxx chassis✅ OEM fit and finish – direct bolt-on replacement✅ Durable molded construction – built for strength and reliability✅ Foam pad included – protects battery and prevents movement✅ Front and rear mounts + spacers included – everything you need 📦 Includes: (1) Battery Hold-Down (1) Front Mount (1) Rear Mount (2) Spacers (1) Foam Pad Part #: 8919R 💡 Pro Tip: Perfect for securing larger capacity packs—combine with Maxx battery straps or foam shims for a custom fit.

Read more less

Traxxas Front Shock Tower – Part 6839Reinforce Your Front End. Built to Take Hits. The Traxxas Front Shock Tower (6839) is a direct replacement part for the Slash 4X4 and related models. It mounts securely to the front bulkhead and provides stable upper mounting points for the front shocks, ensuring precise suspension performance and durability. ✅ OEM replacement part – designed specifically for Slash 4X4✅ Strong composite construction – lightweight yet impact-resistant✅ Pre-molded mounting holes – easy bolt-on install✅ Restores proper shock alignment and support✅ Compatible with stock hardware and body mounts 📦 Includes: (1) Front Shock Tower Part #: 6839 Fits: Traxxas Slash 4X4 Slash 4X4 VXL Slash 4X4 Ultimate Stampede 4X4 Rally VXL Telluride 💡 Pro Tip: Replace both front and rear towers together to ensure balanced suspension geometry and consistent handling.    

Read more less

Traxxas Rear Shock Tower – Part 6838Strong. Precise. Ready for Battle. The Traxxas Rear Shock Tower (6838) is a direct OEM replacement designed to restore rear suspension strength and keep your 4X4 rig running true. Built from durable composite material, this tower is ready to handle the abuse of hard landings and big hits. ✅ Factory replacement for multiple Traxxas models✅ Molded composite construction – lightweight and impact-resistant✅ Pre-drilled mounting holes – easy bolt-on installation✅ Restores proper rear shock geometry and support✅ Compatible with stock hardware 📦 Includes: (1) Rear Shock Tower Part #: 6838 Fits: Slash 4X4 Slash 4X4 VXL Slash 4X4 Ultimate Stampede 4X4 Stampede 4X4 VXL Rally VXL Telluride 💡 Pro Tip: Replace worn or cracked towers after a major impact to avoid shock misalignment and uneven handling.

Read more less

Traxxas Ball Bearings 5x10x4mm (2) – Part 4609Smooth Performance. Long-Lasting Precision. The Traxxas 5x10x4mm Ball Bearings are ideal replacements or upgrades for high-wear areas in your RC drivetrain or suspension. Designed for smooth, low-friction rotation and sealed for durability, these bearings are a must-have for any serious builder or racer. ✅ Includes 2 high-quality ball bearings✅ Size: 5x10x4mm – fits a wide range of Traxxas vehicles✅ Sealed design – keeps out dirt and debris✅ Reduces rolling resistance and friction✅ Perfect for hubs, transmissions, steering systems & more 📦 Includes: (2) 5x10x4mm Ball Bearings Part #: 4609 💡 Pro Tip: Always keep extra bearings in your pit box — a quick swap keeps your rig rolling like new.

Read more less

Traxxas 39mm Front Aluminum Camber Link – Part 3737 (Red or Blue)Tuned Precision. Aluminum Strength. Color to Match Your Build. The Traxxas 39mm front camber link turnbuckle is built from lightweight, anodized aluminum to provide extra strength and adjustability over stock plastic links. Whether you're upgrading for durability or adding style, this part delivers both. ✅ Available in Red or Blue anodized finish – match your rig’s style✅ Assembled with rod ends & hollow balls – ready to install✅ 39mm length – direct fit for Traxxas front suspension✅ Aluminum construction – stiffer, more durable than stock✅ Perfect for tuning front camber on high-performance setups✅ See Part 3741X for complete front/rear camber link set 📦 Includes: (1) 39mm Aluminum Camber Link Turnbuckle (Assembled) (2) Hollow Balls Part #: 3737 OR 3737A (choose Red or Blue) 💡 Pro Tip: Pair with aluminum rear camber links and toe links for a fully upgraded suspension geometry setup.  

Read more less

Traxxas 3x10mm Washer-Head Machine Screws (6) – Part 3193Secure Fit. Wider Hold. Versatile Length. The Traxxas 3x10mm washer-head machine screws are a go-to solution when you need a reliable fastener with added grip. The integrated washer-style head distributes pressure evenly — ideal for fastening into plastic or securing sensitive components. ✅ Includes 6 washer-head machine screws✅ Size: 3x10mm – versatile length for multiple RC applications✅ Integrated washer head – prevents pull-through and distributes load✅ Standard 3mm thread – fits most 1/10 scale Traxxas vehicles✅ Perfect for mounting electronics, suspension parts, and body panels 📦 Includes: (6) 3x10mm Washer-Head Machine Screws Part #: 3193 💡 Pro Tip: Ideal for use in plastic components where added surface area helps prevent damage.  

Read more less

Traxxas 3x8mm Washer-Head Machine Screws (6) – Part 3185Built-In Grip. Extra Hold. Compact Size. The Traxxas 3x8mm washer-head machine screws provide a wider contact surface for more secure fastening — without needing a separate washer. Ideal for mounting components where extra grip is needed in a tight space. ✅ Includes 6 washer-head machine screws✅ Size: 3x8mm – compact length for low-clearance installs✅ Washer-style head – spreads load, prevents pull-through✅ Standard 3mm thread – compatible with most Traxxas builds✅ Perfect for mounting electronics, linkages, and body parts 📦 Includes: (6) 3x8mm Washer-Head Machine Screws Part #: 3185 💡 Pro Tip: Great for plastic parts where larger heads reduce the risk of cracking or stripping.  

Read more less

Traxxas 3x15mm Countersunk Machine Screws (6) – Part 3179Longer Reach. Flush Fit. Factory Reliable. The Traxxas 3x15mm countersunk machine screws are designed for secure fastening where a flush surface is needed — with a little more length for deeper mounting applications. ✅ Includes 6 precision-machined screws✅ Size: 3x15mm – great for thicker components or multiple layers✅ Countersunk head – installs flush for a smooth, clean finish✅ Standard 3mm thread – fits most Traxxas 1/10 scale builds✅ Perfect for chassis, skid plates, and hardware upgrades 📦 Includes: (6) 3x15mm Countersunk Machine Screws Part #: 3179 💡 Pro Tip: Ideal for use in areas where ground clearance matters or where screws pass through multiple materials.

Read more less

Traxxas 3x10mm Countersunk Machine Screws (6) – Part 3177Flush Fit. Clean Finish. Reliable Hold. The Traxxas 3x10mm countersunk machine screws are ideal when you need a flat, snag-free finish on your chassis or components. Perfect for securely mounting parts where a flush surface is critical. ✅ Includes 6 countersunk machine screws✅ Size: 3x10mm✅ Precision-threaded for secure fitment✅ Countersunk head – sits flush for clean installs✅ Great for chassis plates, skid plates, and more 📦 Includes: (6) 3x10mm Countersunk Machine Screws Part #: 3177 💡 Pro Tip: Use with countersunk washers or directly into flat surfaces where clearance matters.

Read more less

Traxxas 2.6x10mm Round-Head Self-Tapping Screws (6) – Part 2673Grip Fast. Hold Tight. No Threads Needed. These 2.6x10mm round-head self-tapping screws are perfect for creating solid threads in plastic components. Designed for clean installs and long-lasting grip, they’re a must-have for any RC toolbox. ✅ Includes 6 self-tapping screws✅ Size: 2.6x10mm✅ Round-head design – low-profile fit, clean finish✅ Self-tapping tip – cuts its own threads in plastic and composites✅ Ideal for electronics trays, skid plates, and plastic mounting points 📦 Includes: (6) 2.6x10mm Round-Head Self-Tapping Screws Part #: 2673 💡 Pro Tip: Pre-drill a pilot hole to avoid cracking thin plastic during installation.    

Read more less

Traxxas 3x18mm Round-Head Machine Screws (6) – Part 2565Reliable Hardware. Precision Fit. The Traxxas 3x18mm round-head machine screws are perfect for replacing lost hardware or stocking your pit box. Built for a secure fit and clean finish, these screws are ideal for a wide range of RC assembly applications. ✅ Includes 6 round-head machine screws✅ Size: 3x18mm✅ Standard thread – compatible with most 1/10 Traxxas builds✅ Ideal for suspension, body, and chassis components✅ OEM quality for reliable performance 📦 Includes: (6) 3x18mm Round-Head Machine Screws Part #: 2565 💡 Pro Tip: Always keep a few spare hardware packs on hand for quick repairs and build adjustments.  

Read more less

Traxxas Round-Head Machine Screws 3x12mm (6-Pack) – Part #2561 These genuine Traxxas 3x12mm round-head machine screws are perfect for securing components where a flush mount isn't needed. Designed for durability and precision fit, they’re ideal for use in a variety of Traxxas models and general RC repair or customization. Quantity: 6 screws Size: 3mm diameter x 12mm length Head Style: Round head Thread Type: Machine thread Compatibility: Fits a wide range of Traxxas vehicles Traxxas Part Number: 2561 Perfect for replacements or spares to keep in your RC toolbox.  

Read more less

Traxxas Aluminum Spacer Set – 3x6mm (Part 2539)Fine-Tune Your Fitment. Lightweight. Precise. The Traxxas 3x6mm Aluminum Spacer Set includes a variety of thicknesses, perfect for dialing in suspension geometry, adjusting link positions, or spacing out components during custom builds. ✅ Made from lightweight aluminum – strong and corrosion-resistant✅ Precise inner/outer diameter: 3x6mm – perfect for suspension screws and link hardware✅ Multiple thicknesses included – adjust stack height exactly✅ Great for suspension tuning, link spacing, and custom mods 📦 Includes: (2) 3x6x1.5mm aluminum spacers (1) 3x6x2.5mm aluminum spacer (2) 3x6x3.8mm aluminum spacers Part #: 2539 💡 Pro Tip: Keep a few sets in your pit box — they’re essential for fine-tuning ride height, camber link angles, and shock position.

Read more less

Traxxas 47mm Front Camber Link Turnbuckles (2) – Part 2444Tighten Up Your Front-End Geometry. The Traxxas 47mm Front Camber Link Turnbuckle Set is a direct replacement for the front camber links on the Traxxas Bandit. These adjustable steel turnbuckles allow you to fine-tune your camber for better cornering, tire contact, and front-end responsiveness. ✅ Designed specifically for the Traxxas Bandit (front suspension)✅ Includes two 47mm steel turnbuckles✅ Smooth-threaded for precise alignment changes✅ Heavy-duty steel construction – reliable and durable✅ Adjustable with a turnbuckle wrench (sold separately) 📦 Includes: (2) 47mm Front Camber Link Turnbuckles Part #: 2444 💡 Pro Tip: Combine with the 36mm rear turnbuckles (Part 2443) for full camber control front and rear.

Read more less

Traxxas 2065R Servo Case & Gaskets Part #: 2063R Keep your Traxxas 2065R servo sealed and secure with this replacement servo case and gasket set. Designed specifically for the 2065R metal-gear waterproof sub-micro servo, this kit restores the waterproof protection and structural integrity of your servo housing. ✅ Features: Direct replacement case and gaskets for the 2065R servo Maintains waterproof seal and internal protection High-precision fit for metal-gear, sub-micro servo design 📦 Includes: (1) Servo Case (1) Gasket Set For use with: Traxxas 2065R sub-micro metal-gear waterproof servo 🛠️ Perfect for maintenance or repair of your 2065R servo—keep it running strong and sealed tight!

Read more less

Traxxas Mini Maxx Steel CV Driveshaft Set (4) – Part 10750XUpgrade Your Driveline. Dominate Every Hit. Get race-ready strength and consistent power delivery with the Traxxas Mini Maxx Steel CV Driveshaft Assemblies. Whether you're running front or rear, these heavy-duty constant-velocity shafts are designed to handle brutal torque, big air, and hard landings — without breaking a sweat. ✅ Full set of (4) steel CV driveshafts – for front or rear✅ Pre-assembled for quick install✅ Includes (4) hardened steel drive cups – built to last✅ Also includes (4) screw pins – everything you need✅ Perfect upgrade from stock plastic shafts 📦 Includes: (4) Steel CV Driveshafts (assembled) (4) Steel Drive Cups (4) Screw Pins Part #: 10750X 💡 Pro Tip: Run CVs front and rear for smoother power transfer, tighter steering, and less drivetrain slop.  

Read more less

Traxxas Mini Maxx Rear Shock Tower (Part 10744) – Stronger. Straighter. Smarter. Give your Mini Maxx the support it needs with the Traxxas Rear Shock Tower (10744). Designed to withstand heavy landings and brutal bashing, this direct-replacement part restores the backbone of your rear suspension setup. ✅ Exact fit for Traxxas Mini Maxx✅ OEM durability – molded to handle impacts and flex✅ Pre-drilled for perfect shock alignment✅ Bolt-on design – installs with factory hardware✅ Restores factory geometry & stability 📦 What’s Included: (1) Rear Shock Tower Part #: 10744 💡 Pro Tip: Replace front and rear towers together for balanced suspension performance and long-term reliability.  

Read more less

Traxxas 10743 Aluminum Bellcrank Assembly – Precision Steering. Aluminum Tough.Choose Your Color: Gray, Red, Orange, Blue, or Green Dial in your steering with the Traxxas Aluminum Bellcrank Assembly. CNC-machined from 6061-T6 aluminum and anodized in bold color options, this upgrade gives your steering system pro-level precision, strength, and smooth response under pressure. ✅ CNC 6061-T6 aluminum construction – ultra-rigid, zero-flex feel✅ Anodized in five high-impact colors – Gray, Red, Orange, Blue, Green✅ Includes drag link + full stainless & bearing hardware✅ Pre-threadlocked fasteners – ready to install✅ Dual ball bearing support – buttery-smooth motion 📦 Complete Kit Includes: Aluminum steering bellcranks & drag link (dark titanium finish) (2) 3x13mm SS screws (with threadlock) (2) 3x12mm button-head cap screws (with threadlock) (1) 3x15mm button-head cap screw (with threadlock) (2) 5x8x2.5mm ball bearings (2) 5x10x4mm ball bearings 💡 Pro Tip: Pair with aluminum servo horns and tie rods for a fully upgraded front-end feel.  

Read more less

Traxxas Inner Hardened Steel Upper Suspension Pins (4) – Part 10741XReinforce Your Rig from the Inside Out. These 3x45mm hardened steel inner upper suspension pins are a must-have upgrade for drivers who demand durability under pressure. Designed to hold your suspension geometry tight through punishing landings, hard hits, and high-speed cornering. ✅ Includes 4 hardened steel pins – 3x45mm each✅ Upgrades inner upper suspension link locations✅ Precision-machined for direct fit✅ Won’t bend or flex like stock pins✅ Perfect for high-stress off-road setups 📦 What’s Included: (4) 3x45mm Inner Upper Suspension Pins Part #: 10741X 🔧 Stronger hardware = tighter handling = less downtime.Pair with Traxxas outer pins for a full suspension pin upgrade.  

Read more less

Traxxas Hardened Steel Outer Suspension Pins (8-Pack) – Stay Straight. Stay Strong. Precision Toughness Where It Counts.Upgrade your suspension game with Traxxas Outer Suspension Pins, crafted from hardened steel to handle brutal impacts, hard landings, and aggressive driving — without bending. ✅ Includes 8 pins total – (4) 3x34mm + (4) 3x37mm✅ Hardened steel construction – built to resist bending and wear✅ Exact fit for outer suspension points – easy, direct replacement✅ Ideal for high-impact racing & bashing✅ OEM-grade performance & reliability These pins are perfect for replacing bent stock pins or just beefing up your rig before things get wild. 📦 Includes: (4) 3x34mm hardened steel suspension pins (4) 3x37mm hardened steel suspension pins 💥 Stronger pins = straighter suspension = smoother control.Essential upgrade for high-performance RC setups.

Read more less

Traxxas Front Shock Tower – Engineered to Toughen Your Ride Stiffen Up Your Front End.This Traxxas Front Shock Tower delivers rugged support and precision protection for your RC rig. Designed to withstand intense landings and off-road abuse, it keeps your front shocks aligned and ready for action. ✅ Exact OEM fit – attaches seamlessly to Traxxas chassis✅ Durable material – high-strength plastic resists flex and shock✅ Optimized geometry – supports stable handling and consistent suspension travel✅ Bolt-on installation – simple replacement with stock hardware✅ Ideal for bashers & racers – durable under pressure Why it matters: Prevents shock misalignment for smoother handling Reinforces chassis structure after crashes or upgrades Maintains proper suspension geometry during rough runs 🔧 Installation note: Use existing front shock hardware and mounting holes—no need for modifications.

Read more less

This is an optional set of RPM 4S Kraton and Outcast Rear Suspension Arms, intended for use with ARRMA Kraton and Outcast kits and designed for strength and durability with features to better enhance performance. These A-arms deliver excellent slop elimination by reducing the amount of movement of the A-arm at the hinge pins, providing for better steering response and more consistent camber, caster and toe angle settings. The addition of a second shock mount hole further out on the arm provides a lower profile suspension set-up. This shock position allows the suspension to lay down a little further, dropping the ride height for a lower center of gravity and better cornering stability. All RPM A-arms are molded from their nearly indestructible blend of engineering grade nylons for performance you can rely on when conditions are at their worst. These arms are almost 25% thicker and able to take much more damage than stock. Features: Nearly 25% thicker than stock a-arms for extreme durability Less slop for improved suspension and steering performance Second shock mount hole for added adjustability Replaces stock #AR330521

Read more less

Arrma XLWB V2 Composite Chassis Part #: ARA320799 Upgrade or replace your chassis with the Arrma XLWB V2 Composite Chassis, specifically designed for durability and fitment on the Kraton 4S V2 BLX. Built to handle the demands of 4S bashing, this chassis delivers rugged performance and factory-spec reliability. 🔧 Features: ✅ Direct replacement for the stock chassis ✅ Extra-long wheelbase (XLWB) design for improved stability ✅ Durable composite construction for strength and longevity ✅ Precision molded for a perfect fit 📦 Includes: (1) XLWB V2 Composite Chassis 🚗 Compatibility:  • Arrma Kraton 4S V2 BLX

Read more less

Avid Oiler Pen | Empty [AV10135] Product Overview: The Avid Empty Oiler Pen gives you full control over your lubrication needs. Originally used for Avid Slip oil, this handy tool now comes empty—ready to be filled with your favorite lubricant. It features a precision 1" (25.4mm) long steel tip for clean and accurate application and holds up to 1/4oz (7.4cc) of fluid. A perfect companion for any RC tool kit or pit box. Features: Comes empty – fill with your preferred lubricant Precision 1" steel tip for controlled application Holds up to 1/4oz (7.4cc) of fluid Compact, pit-friendly size Includes: (1) Empty Avid Oiler Pen Part Number: AV-OIL-PEN

Read more less

Team Associated RC10B74.2 Center Bulkhead & Brace Set (Decoupled Slipper) – ASC92378 Essential Support for Decoupled Slipper Installations Upgrade or replace with confidence using the Center Bulkhead and Brace Set designed specifically for the RC10B74.2 when equipped with the Factory Team Decoupled Slipper system. This set ensures precise fitment and rigidity where it matters most, helping maintain drivetrain alignment and chassis stability under racing conditions. ⚙️ Features: ✅ Designed for Decoupled Slipper Configuration ✅ Strong and Lightweight – Keeps driveline secured under high load ✅ Direct Fit for RC10B74.2 ✅ Factory Team Grade Components 📦 Includes: (1) Center Bulkhead (1) Center Brace ✅ Compatibility: Team Associated RC10B74.2 Works in conjunction with: ASC92377 – Servo Mount Set (Decoupled Slipper) ASC92379 – FT Decoupled Slipper Kit 🛠️ A must-have component for racers running the decoupled slipper—engineered to support performance and reliability!

Read more less

Team Associated FT Center CVA Bone 45.5mm (for Decoupled Slipper) – ASC92371 Factory-Grade Drivetrain Performance The 45.5mm Factory Team Center CVA Bone is designed for use with the RC10B74.2 and B74.2D when equipped with the FT Decoupled Slipper system. This lightweight and durable center bone provides smooth and efficient power transfer, helping reduce rotational mass for optimized drivetrain performance in 13.5T class racing. ⚙️ Features: ✅ 45.5mm Length – Perfect fit for use with the FT Decoupled Slipper system ✅ Precision Machined – Ensures smooth operation and tight tolerances ✅ Lightweight Design – Reduces rotational mass for faster acceleration ✅ Factory Team Quality – Built for competition use 📦 Includes: (1) 45.5mm Center CVA Bone ✅ Compatibility: Team Associated RC10B74.2 Team Associated RC10B74.2D Use with ASC92367 FT Decoupled Slipper Outdrive 🔁 Ideal for racers running the lightweight driveline setup—maximize performance and consistency on the track!

Read more less

Team Associated FT Decoupled Slipper Spring – ASC92369 Precision Tuning for Decoupled Slipper Setups The Factory Team Decoupled Slipper Spring is specifically designed for use with the RC10B74.2 FT Decoupled Slipper Outdrive system. It provides the optimal preload and compression characteristics needed to fine-tune your decoupled slipper clutch for consistent, race-ready performance. ⚙️ Features: ✅ Precision-Calibrated Spring – Matches the performance needs of the FT Decoupled Slipper ✅ Factory Team Quality – Built for durability and consistent response ✅ Improved Slipper Feel – Enhances tuning range for racers demanding control 📦 Includes: (1) Decoupled Slipper Spring ✅ Compatibility: Team Associated RC10B74.2 Team Associated RC10B74.2D Use with ASC92367 FT Decoupled Slipper Outdrive 🛠️ A must-have for racers utilizing the decoupled slipper system to push their B74.2 to the limit.

Read more less

Team Associated FT Decoupled Slipper Outdrive w/ One-Way – ASC92367 Decoupled Control. Tuned Performance. Upgrade your RC10B74.2 with the Factory Team Decoupled Slipper Outdrive, featuring an integrated one-way bearing. This option allows the front drivetrain to coast during off-throttle moments, improving corner entry stability and overall drivability—especially beneficial on high-bite surfaces. ⚙️ Features: ✅ One-Way Bearing Design – Allows the front end to freewheel when off throttle ✅ Decouples Braking Force – Rear-focused braking for improved cornering balance ✅ CNC-Machined Precision – Factory Team quality and durability ✅ Designed for serious 4WD racers looking to fine-tune handling characteristics 📦 Includes: (1) Decoupled Slipper Outdrive w/ Integrated One-Way Bearing ✅ Compatibility: Team Associated RC10B74.2 Team Associated RC10B74.2D 🧩 Ideal for racers aiming to extract maximum tuning potential from their 4WD buggy platform.

Read more less

Team Associated RC10B7 HD Ball Differential Outdrive Set – ASC92453 Heavy Duty Upgrade for Peak Performance The HD Ball Differential Outdrive Set is a direct replacement for your Team Associated RC10B7, designed to handle the demands of competitive racing. Built for durability and strength, these outdrives are ideal for racers who push their 1/10 scale buggies to the limit. ⚙️ Features: ✅ Heavy duty design for improved durability ✅ Compatible with the RC10B7 ball differential ✅ Precision machined for smooth operation ✅ Essential upgrade for high-stress racing conditions 📦 Includes: (1) Left HD Ball Differential Outdrive (1) Right HD Ball Differential Outdrive ✅ Compatibility: RC10B7 🏁 Strengthen your drivetrain and stay in the race longer with this premium Factory Team upgrade.

Read more less

Team Associated RC10B74.2 FT Center Dogbone Outdrives – Aluminum – ASC92359 Engineered for Lightweight Speed and Precision. These Factory Team Aluminum Center Dogbone Outdrives are a direct upgrade for the RC10B74 series, designed to be used with the FT Lightweight Driveline Center Kit (#92372). Precision CNC-machined for reduced rotating mass and maximum drivetrain efficiency. 🔧 Features: ✅ Lightweight aluminum construction ✅ CNC-machined for accuracy and durability ✅ Designed for high-performance racing applications ✅ Works with #92372 Lightweight Driveline Kit 📦 Includes: (2) Aluminum Center Dogbone Outdrives ✅ Compatibility: RC10B74 RC10B74.1 RC10B74.1D RC10B74.2 RC10B74.2D Designed for use with ASC92372 FT Lightweight Driveline Ki 🏁 Perfect for racers seeking reduced driveline weight and increased efficiency on the track!

Read more less

Team Associated RC10B74.2 Factory Team Aluminum Center Differential Outdrives (2) – ASC92358 Lightweight Strength for Serious Performance. Upgrade your driveline with these Factory Team Aluminum Center Differential Outdrives, designed specifically for the B74.2 Lightweight Center Driveline Kit (ASC92372). Machined from high-quality aluminum, these outdrives reduce rotational mass while maintaining the strength needed for competitive racing. 🔧 Features: ✅ CNC-machined aluminum construction ✅ Lightweight for improved acceleration ✅ High-strength upgrade over stock components ✅ Precision fit for the B74.2 driveline 📦 Includes: (2) Aluminum Center Differential Outdrives ✅ Compatibility: RC10B74.2 RC10B74.2D Compatible with B74.2 Lightweight Center Driveline Kit (ASC92372) 🏁 Shed weight and gain efficiency—perfect for racers looking to optimize their drivetrain!

Read more less

Team Associated 3.5x44.5mm TiN Rear Shock Shafts (2) Durability Meets Smooth Performance. These 3.5x44.5mm Titanium Nitride-coated rear shock shafts are precision replacements designed for the Team Associated RC8T4 and RC8T4e vehicles. Built to withstand the rigors of 1/8-scale racing, they deliver smooth shock movement and enhanced durability. 🔧 Features: ✅ Titanium Nitride (TiN) Coated for reduced friction and extended wear life ✅ High-Precision Fitment ensures optimal shock performance ✅ 3.5mm Diameter, 44.5mm Length — rear shock compatibility ✅ Built for RC8T4 & RC8T4e Team Associated vehicles 📦 Includes: (2) 3.5x44.5mm TiN Rear Shock Shafts 🏁 Reinforce your rear suspension with Factory Team reliability and proven performance!

Read more less

Team Associated Factory Team Rear Gearbox Pinion Height Inserts – RC10B74.2 Precision Tuning for Peak Gear Mesh Upgrade your drivetrain precision with the Factory Team Machined Rear Gearbox Pinion Height Inserts for the RC10B74.2 and B74.2D. These CNC-machined aluminum inserts allow fine-tuning of your pinion height, ensuring ideal mesh alignment when adjusting differential height settings. 🔩 Features: 🧰 Precision-machined aluminum construction 🎯 Adjustable pinion height ensures proper gear mesh 🔁 Ideal for setups that involve diff height tuning 🔧 Quick and easy installation 📦 Includes: (1) 0–3mm Pinion Height Insert (1) 1–2mm Pinion Height Insert ✅ Compatibility: Team Associated RC10B74.2 Team Associated RC10B74.2D 🛠️ Factory-level adjustment for competitive edge.

Read more less

Arrma Aluminum Gearbox Set – ARA311186 Boost Durability & Performance with a Precision Alloy Upgrade Upgrade your Arrma vehicle with the ARA311186 Aluminum Gearbox Set, engineered for enhanced strength and long-lasting reliability. Designed as a direct replacement for stock components, this aluminum gearbox is ideal for high-performance builds and bashers pushing their rigs to the limit. 🛠️ Features: 💪 CNC-Machined Aluminum – Increases structural strength and durability ⚙️ Precision Fit – Ensures optimal gear mesh and drivetrain alignment 🔧 Direct Replacement – Compatible with select Arrma vehicles without modification 🔒 Enhanced Heat Dissipation – Helps keep temperatures down during intense runs ✅ Compatibility: Arrma Kraton 6S BLXArrma Kraton 6S EXBArrma Notorious 6S BLX *Check your vehicle’s manual or Arrma parts listings to ensure fitment for your specific model. 🏁 Perfect for hardcore bashers or racers looking to reduce flex, increase drivetrain efficiency, and extend gearbox life!

Read more less

Concepts F2 Clear Body w/ Wing – Losi Micro-B🏁 Aggressive Style, Proven Performance The JConcepts F2 Body for the Losi Micro-B brings race-proven aerodynamics and championship-winning style to the world of 1/28-scale racing. Borrowing key elements from the successful Finnisher line, this sleek and aggressive body is engineered to perform on tight indoor tracks packed with jumps, sweepers, and high-speed corners. With a forward cab bias, sharp windshield angle, and low-profile side-pods, the F2 delivers both improved rotation and enhanced mid-air stability. The simplified design reduces turbulence and unwanted drag, making it a standout on both carpet and turf. A micro-sized carpet/turf/dirt rear wing is included to round out the package with adjustable downforce for any track layout. 🔧 Note: Designed to attach using hook and loop tape (not included), just like the stock body. ✨ Key Features: JConcepts F2 styling, optimized for the Losi Micro-B platform Forward cab placement for improved steering response Steep windshield angle for better jump handling and flight stability Sculpted side-pods with dual-step scoop treatment Rear cab step and louver detailing Includes micro-size carpet/turf/dirt wing Clear polycarbonate with overspray film Includes window masks and JConcepts decal sheet 📦 Includes: (1) Clear F2 Body for Losi Micro-B (1) Micro Carpet/Turf/Dirt Rear Wing (1) Window Mask Sheet (1) JConcepts Decal Sheet Compatibility: Losi Micro-B ⚠️ Body requires trimming and painting. Painted body shown for reference only.

Read more less