Fine-tune your suspension with the XRAY 42.5mm Big Bore Front Conical Spring Set. Designed for big-bore shocks, these precision-engineered springs allow you to dial in your buggy or stadium truck’s handling for any track condition. Each spring is color-dot coded for quick identification, ranging from soft (1-Dot) to firm (5-Dot). Features: Set includes (2) precision-made conical front springs 42.5mm length, designed for XRAY big-bore shocks Dot-coded system for quick rate identification Softer springs increase traction and absorb bumps Stiffer springs increase responsiveness and reduce chassis roll Spring Rates (Softest → Hardest): 1-Dot – Part #368381 2-Dot – Part #368382 3-Dot – Part #368383 4-Dot – Part #368384 5-Dot – Part #368385 Effects of Shock Spring Changes: Softer: More chassis roll, more traction, smoother on bumps, but more prone to bottoming out. Stiffer: Less chassis roll, less traction, sharper response, improved handling in high grip. Compatibility: XRAY XB2 – 1/10 2WD Buggy (Front) XRAY XT2 – 1/10 Stadium Truck (Front) Other XRAY 42.5mm big-bore front shock applications (check manual for confirmation).

Read more less

Upgrade your XB2/XT2 with the XRAY Aluminum Steering Arm set, precision-machined from Swiss 7075 T6 aluminum for maximum strength and durability. Designed specifically for use with the 1-piece chassis, these arms deliver consistent, slop-free steering performance. Features: CNC-machined Swiss 7075 T6 aluminum Black anodized finish for style and protection Provides ultra-precise steering feel Direct fit for XRAY 1-piece chassis design Includes left and right aluminum arms (2) Compatibility: XRAY XB2 (’21 onwards with 1-piece chassis) XRAY XT2 (’21 onwards with 1-piece chassis) Includes: (2) Aluminum Steering Arms

Read more less

The XRAY XB2 Graphite Front Suspension Arm (Right, Short, Low Shock Mounting) is crafted from graphite composite material to deliver the perfect balance of strength, stiffness, and responsiveness. The short design improves steering response and corner speed, while the low shock mounting provides increased stability on high-traction tracks. Features: Graphite composite material for enhanced stiffness and precision Short design improves steering response and agility Low shock mounting (LSM) for greater stability and cornering performance Precision-molded factory replacement part Compatibility: XRAY XB2 (all versions, right side front lower short arm)

Read more less

Enhance steering precision and durability with the Team Associated Factory Team Aluminum Clamping Servo Horn. Designed for 23-tooth servos, this 15.5mm horn offers a secure clamping design to prevent slipping and maintain consistent steering response. Features: CNC-machined aluminum for maximum strength and precision Clamping design for a secure, slip-free fit 15.5mm length for precise steering geometry Fits 23T spline servos Factory Team quality for competition-level performance Includes: (1) Aluminum Clamping Servo Horn – 23T, 15.5mm Perfect for racers who demand reliable, high-performance steering control.

Read more less

(For EMB-WRC, EMB-RA, EMB-1, EMB-SC, EMB-DT, EMB-TC, EMB-TG, EMB-MT, LC12B1)

Read more less

  Secure your battery with confidence using the LC Racing EMB Battery Mount Set. Designed for multiple LC Racing platforms, this set keeps your battery firmly in place, ensuring stable performance and reliability during hard runs and high-speed driving. Features: Durable composite construction for long-lasting use Precision fit for secure battery retention Lightweight design to keep your vehicle balanced Direct replacement for stock battery mount components Compatibility: EMB-WRC EMB-RA EMB-1 EMB-SC EMB-DT EMB-TC EMB-TG EMB-MT LC12B1 Includes: Complete battery mount set with all necessary parts for installation A must-have replacement to keep your battery locked down and your RC running strong.

Read more less

(For EMB-WRC, EMB-RA, EMB-SC, EMB-TG, EMB-DT)

Read more less

  Keep your drivetrain smooth and reliable with the LC Racing Axle Set, designed for multiple EMB series platforms. Built for strength and precision, these axles ensure efficient power transfer and long-lasting performance whether you’re racing or bashing. Features: High-quality, precision-machined axles for durability and smooth operation Maintains proper wheel alignment and drivetrain efficiency Direct replacement for stock axles — simple, hassle-free installation Designed to withstand the demands of high-performance RC driving Compatibility: EMB-WRC EMB-RA EMB-1 EMB-SC EMB-DT EMB-TC EMB-TG EMB-MT Includes: Complete axle set for compatible LC Racing models Perfect for restoring peak performance and reliability to your EMB series vehicle.

Read more less

(For EMB-WRC, EMB-RA, EMB-1, EMB-SC, EMB-DT, EMB-TC, EMB-TG, EMB-MT)

Read more less

(For EMB-WRC, EMB-RA, EMB-1, EMB-SC, EMB-DT, EMB-TC, EMB-TG, EMB-MT)

Read more less

(For EMB-WRC, EMB-RA, EMB-1, EMB-SC, EMB-DT, EMB-TG, EMB-MT, LC12B1, PTG-2)

Read more less

(For EMB-WRC, EMB-1, EMB-SC, EMB-DT, EMB-TC, EMB-TG, EMB-MT)

Read more less

LC Racing L5033 Rear Aero Wing(5'') (For BHC-1)

Read more less

LC Racing L5051 Aluminum BHC Servo Horn 23T +3mm (For BHC-1)

Read more less

LC Racing L5045 Aluminum Rear Ballstud Mount (For BHC-1)

Read more less

  Reduce friction and improve efficiency with the LC Racing Ball Bearing Set. Designed as a direct replacement for stock bushings or worn bearings, this complete set keeps your drivetrain and wheels spinning freely for smoother handling and longer run times. Features: Complete set of precision ball bearings for your LC Racing model Reduces rolling resistance for improved speed and efficiency Helps extend the life of drivetrain components Sealed design for protection against dirt and debris Direct replacement for stock bearings — easy to install Includes: Full ball bearing set for compatible LC Racing vehicles Perfect for restoring like-new performance or upgrading from bushings for smoother, more efficient operation.

Read more less

  Upgrade your drivetrain with the LC Racing CVD Drive Shaft Set, designed for smoother power delivery, improved efficiency, and increased durability. Perfect for racers and bashers who demand precision and reliability from their RC. Features: Constant Velocity Drive (CVD) design for smooth, efficient power transfer Reduces drivetrain chatter and binding for improved handling High-strength steel construction for long-lasting durability Direct replacement for stock drive shafts on compatible LC Racing models Includes: Complete CVD Drive Shaft Set An ideal upgrade for maintaining consistent performance and handling, run after run.

Read more less

⚙️ Smooth power. Built-in protection. The Traxxas Complete Slipper Clutch is a ready-to-install assembly designed for the Slash 4x4. It helps protect your drivetrain by allowing controlled slip under heavy load, reducing wear on gears and providing smoother power delivery. Perfect for maintenance, repairs, or as a spare for quick swaps at the track or in the field. ✅ Genuine Traxxas replacement part✅ Fully assembled for easy installation✅ Protects drivetrain from excessive shock loads✅ Restores smooth acceleration and control 📦 Includes:• (1) Complete Slipper Clutch Assembly for Slash 4x4  

Read more less

Perfect for High-Power Drag Racing Builds📦 Part #: Choose 20T–40T Take your drag racing setup to the next level with the ProTek RC 48P Lightweight Hard Anodized Aluminum Pinion Gear. These pinions are specifically engineered for high-RPM 4-pole motors with 5.0mm shafts, making them ideal for no-prep and straight-line drag applications. Precision-cut for smooth 48 pitch mesh, they're built to deliver maximum efficiency and faster acceleration by reducing rotational mass. 🔧 Key Features: Pitch: 48P (Perfect for drag and speed builds) Bore Size: 5.0mm – fits large shaft 4-pole motors Material: Lightweight aluminum for reduced rotating mass Finish: Hard anodized for durability under high stress Etched Tooth Count: Easy size identification Performance: Quick spool-up, consistent gear mesh, and reliable grip under load 🏁 Why It Matters: Less mass = faster response. Whether you're trying to shave tenths off your ET or just want smoother power delivery, these ProTek pinions give your build the edge where it counts. 👉 Choose from 20T to 40T to dial in your exact gearing needs! Note: Compatible with 48 pitch spur gears and motors that use 5mm output shafts. Always double-check mesh and gear clearance during install.

Read more less

🔧 Clean, precise holes—every time. The BOOF RC Body Reamer is the go-to tool for drilling accurate body post holes in your RC car, truck, or aircraft shell. Whether you're mounting a fresh body or making quick adjustments, this durable tool gets the job done with ease. Features:✔ Hardened steel tapered tip for precision reaming✔ Ergonomic anti-slip handle for firm grip and control✔ Measurement marks for consistent hole sizing✔ Ideal for Lexan and other polycarbonate body shells Perfect for:• RC cars & trucks• RC airplanes• Custom shell mounting and mods 💥 No more guesswork—just smooth, accurate results.BOOF RC – Tools that keep you in the race.

Read more less

Restore precision steering to your Maxx with this genuine Traxxas replacement bellcrank set. Designed specifically for the Maxx 1/10 4WD Brushless Monster Truck, this set includes all the essential components needed for a complete steering assembly refresh. 🛠️ Features: Direct OEM replacement for the Maxx Maintains crisp, responsive steering performance Built from high-strength materials for durability under heavy loads 📦 Includes: (2) Steering Bellcranks (1) Bellcrank Support (1) Servo Saver (1) Servo Saver Spring (1) Draglink (2) 3x20mm Shoulder Screws Keep your Maxx sharp and responsive—perfect for high-speed runs and rugged off-road terrain.

Read more less

Keep your suspension solid and secure with this pack of Traxxas Suspension Pin Retainers for the X-Maxx and XRT. Designed to hold the hinge pins in place at the inner upper arm position, these retainers are a must-have for routine maintenance or repairs. 🔧 Includes: (4) Suspension Pin Retainers 🛠️ Features: Direct replacement parts for Traxxas X-Maxx and XRT Ensures secure hinge pin fitment Made from durable molded composite Simple install – ideal for repairs or spares Don’t let loose pins take you out of the action—keep your X-Maxx or XRT dialed in with these factory-spec retainers!

Read more less

Upgrade your suspension with RPM’s high-performance A-arms for the Traxxas Slash and Stampede 4x4! These arms are a game-changer — lighter, stronger, and far more precise than stock. Features: Eliminates slop in the suspension system Tightens tolerances around hinge pins by over 90% Reduces unwanted fore/aft movement for better stability Drops 6.5g per A-arm — nearly 1 oz weight savings per truck! Reinforced bosses for shock and sway bar mounting Iconic RPM styling with 30° leading/trailing edges Molded from RPM’s legendary ultra-durable nylon Available in Black, Red, Green, or Blue Note: Each package includes 1 left and 1 right A-arm Two packages are required to complete one full truck (front and rear) Rear A-arms do not support the upper hinge pin hole of aftermarket axle carriers Proudly made in the USA.

Read more less

  🔩 Secure Your Suspension SetupThis Shock Standoff Bushing Set is a direct replacement for the Losi Mini-T 2.0 and also fits the Mini-B. Whether you're doing routine maintenance or replacing worn parts, this set ensures your shocks stay mounted securely and operate smoothly. 🛠️ Key Features: Direct fit for Mini-T 2.0 and Mini-B Includes both shock standoffs and shock cap bushings Keeps suspension firm and aligned Durable construction for long-lasting use 📦 Includes: (2) Shock Standoffs (2) Shock Cap Bushings ✅ Compatibility: Losi Mini-T 2.0 Losi Mini-B Perfect for restoring performance and keeping your suspension dialed in!

Read more less

🛠️ Built to Handle the Power — Complete Drop-In DifferentialUpgrade or replace your worn-out diff with the TLR 22X AC Complete Gear Differential Set, precision-built for racers who demand maximum traction and bulletproof reliability. Pre-filled with 200,000cs diff fluid and ready to install, this complete assembly is the perfect performance refresh for your 22X platform. 🔧 What’s Inside: (1) Differential Case (2) Cross Pins (2) Outdrives (2) Sun Gears (4) Spider Gears (2) Pins (2) Gaskets (2) Washers (4) O-Rings (4) Button Head Screws (1) Bottle of 200,000cs Differential Fluid ✅ Compatibility:• Losi 22X• Losi 22X-T 🏁 Whether you’re prepping for race day or tuning for traction, this complete gear diff gets you dialed in fast!

Read more less

Keep your 22X buggy in race-ready condition with this Rear Wing Mount & Front Bumper Set. Designed for durability and fit, this OEM replacement set includes everything you need to restore or upgrade the rear wing assembly and front bumper of your TLR 22X platform. 🛠️ Features: OEM fit and finish for the TLR 22X series Includes full wing mounting hardware and front bumper Built for strength and stability under race conditions 📦 Includes: (1) Front Bumper (2) Rear Wing Mounts (2) Rear Wing Braces (2) Rear Wing Spacers ✅ Compatibility:• Losi 22X• Losi 22X-T

Read more less

Take your Mini-T 2.0 or Mini-B to the next level with this precision-machined aluminum rear hub upgrade. Built for performance and longevity, these CNC-cut hubs offer increased strength, improved durability, and a custom anodized finish that makes your ride look as good as it performs. 🔧 Features:✅ CNC machined aluminum construction for max durability✅ Anodized black with silver chamfered edges for a custom look✅ Direct fit with upgraded strength over stock plastic✅ Includes ball studs for hassle-free installation 📦 Includes:• (1) Left Aluminum Rear Hub• (1) Right Aluminum Rear Hub• (2) Ball Studs 🚗 Compatibility:• Losi Mini-T 2.0• Losi Mini-B

Read more less

Upgrade your Mini-T 2.0 with Losi’s 0° Aluminum Caster Blocks, built for precision, strength, and style. CNC-machined and anodized black with sleek silver chamfered edges, these caster blocks are a perfect replacement for worn-out plastic parts and ideal for racers seeking tighter tolerances and improved durability. 🔧 Features:✅ 0° caster angle for sharp, predictable steering✅ CNC machined from durable aluminum✅ Anodized black finish with silver highlights✅ Direct fit with no modifications needed 📦 Includes:• (1) Left Aluminum Caster Block – 0°• (1) Right Aluminum Caster Block – 0° 🚗 Compatibility: • Losi Mini-T 2.0 Losi Mini-B  

Read more less

Keep your steering sharp and your servo protected with the Arrma Grom Servo Saver Set. Designed as a direct replacement for stock components, this set offers a precise fit and easy installation on multiple 1/18 and 1/12 scale platforms. 🔧 Features:✅ Direct replacement for stock servo saver✅ Protects your servo during impacts✅ Factory-installed on Grom series and Losi NASCAR✅ Precision fit for quick and easy install 📦 Includes:(1) Servo Saver Set 🚗 Compatibility:• Arrma Granite Grom• Arrma Mojave Grom• Arrma Typhon Grom• Losi 1/12 NASCAR Race Car

Read more less

Upgrade your gear differential with this Factory Team aluminum diff cover for the RC10B6.1. Designed for maximum durability and precision, this machined aluminum cover adds strength to the gear diff case and helps reduce flex under load—ideal for high-power setups and serious racers. 🔥 Key Features: Precision CNC-machined aluminum construction Factory Team performance part for racing applications Provides added rigidity and improved seal pressure Hard-anodized finish for long-lasting durability Direct replacement for the stock plastic gear diff cover ✅ Compatibility: RC10B6.1 RC10B6.1D RC10B6.2 / B6.3 series (compatible gear diff cases) May also fit other Team Associated models using the same gear diff design 📦 Includes: (1) Aluminum Gear Diff Cover ⚠️ Tip:For best results, use with Team Associated Factory Team gear diff components and premium diff fluid.

Read more less

Team Associated 13mm Front Shock Spring (Blue/4.80lbs) (54mm) [71162] 🚀 Soak up the bumps. Stick the landing. These 13mm Front Shock Springs are built for serious performance on your T6.2 or SC6.2 when upgraded to 13mm shocks. With a 4.80 lb/in rate and 54mm length, they strike the perfect balance—soft enough for buttery-smooth cornering, firm enough to eat up big landings. Upgrade your front-end feel and dial in that confidence. 🔥 Features:✅ Blue rate: 4.80 lbs/in✅ Length: 54mm✅ Perfect for 13mm shocks✅ Great low-speed feel + high-speed support✅ Includes 2 springs 📦 Part Number: 71162🏁 Brand: Team Associated

Read more less

Team Associated RC10T6.4 Carbon Front Shock Tower (Gullwing Arm) [71157] 💥 Precision. Strength. Performance. Upgrade your RC10T6.4 with the Carbon Front Shock Tower, specifically designed for use with gullwing arms (ASC71138). Made from high-quality carbon fiber, this shock tower delivers the perfect blend of lightweight performance and ultra-durable strength—keeping your rig responsive and track-ready. 🔥 Features:✅ Precision-cut carbon fiber for maximum durability✅ Lightweight design improves handling and suspension response✅ Compatible with gullwing arms (ASC71138)✅ Direct replacement for easy install 📦 Part Number: 71157🏁 Brand: Team Associated

Read more less

Team Associated 13mm Rear Shock Spring. These replacement springs springs are intended for the Team Associated B6.4D, however, they will also work with the Team Associated B6.4D as a tuning option. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

The Team Associated Factory Team B6 19mm Octalock LCF Slipper Pad is compatible with the Octalock spur gears. This design was debuted with the RC10B74.1 buggy, and are a great way to upgrade the transmission in your B4/B5/B6 series buggy or truck.  

Read more less

Team Associated RC10B74.2 Battery Mount Set. This is a replacement intended for the RC10B74.2 and B74.2D series of vehicles. Package includes battery mount parts tree, two rubber battery straps and mounting hardware. COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

MIP Gen 2 Speed Tip Hex Driver (.050) [MIP9200S] 🛠️ Precision Meets Speed. Iconic, Upgraded. For over 30 years, MIP tools have been the gold standard in RC wrenching. Now, the Gen 2 Speed Tip series cranks it up with rugged durability and ergonomic finesse—built for pros who need speed, accuracy, and reliability. Perfect for your drill or power driver! 🔥 Gen 2 Upgrades: ✅ Laser-Etched Size Markings – No more squinting or guessing🎯 Color-Coded Ring – Instantly spot the right size🛡️ Black Oxide Coating – Better corrosion resistance, longer lifespan💪 Ergonomic Angled Tip – More comfortable and efficient than straight-cut designs 🔧 Built for Performance: Fits directly into power screwdrivers for fast action Tight tolerances for perfect fit—less wear, more wrenching Proudly Made in the USA Each tool is hand-assembled with care 📦 Includes:(1) Gen 2 Speed Tip Hex Driver (.050) 🇺🇸 Part Number: MIP9200S🔩 Brand: MIP📏 Category: Power Tool Accessories / RC Tools

Read more less