Traxxas 54T Spur Gear – 0.8 Mod / 32-Pitch – Part 3956RSmooth Power Transfer. Built for Brushless. The Traxxas 54-Tooth Spur Gear (3956R) is a direct replacement part for high-performance 1/10 scale models using a 0.8 Mod / 32-pitch gear setup. Ideal for brushless power systems, this gear delivers strong, consistent power transfer while holding up to heavy torque. ✅ Tooth Count: 54T – perfect for torque-balanced gearing setups✅ Pitch: 32P / 0.8 Mod – tough and compatible with brushless motors✅ Durable molded construction – long-lasting under load✅ OEM direct fit for Traxxas models using 32P spur gears✅ Compatible with slipper clutch systems 📦 Includes: (1) 54-Tooth Spur Gear (32P / 0.8 Mod) Part #: 3956R 💡 Pro Tip: Pair with the correct pinion gear to dial in your ideal torque vs. speed ratio for your terrain and driving style.  

Read more less

Traxxas Black Antenna Tube & Cap Part #: 1726A | Keep Your Signal Clean and Secure Maintain optimal signal clarity and a clean look with the Traxxas 1726A Black Antenna Tube & Cap Set. Designed for durability and fitment, this set includes everything you need to route and protect your receiver antenna wire properly. 📦 Includes: (1) Black Antenna Tube (1) Vinyl Antenna Cap (1) Wire Retainer ✅ Features: Durable black antenna tube for a sleek, low-profile look Vinyl cap protects the antenna tip from wear and damage Wire retainer ensures secure installation Compatible with most Traxxas models 🧰 Essential for any Traxxas build or repair to protect your radio system's performance.

Read more less

  ARRMA Front & Rear Composite Upper Gearbox Covers / Shock Tower Set Durable Composite Replacement PartsUpgrade or replace your worn-out components with this ARRMA Front and Rear Upper Gearbox Cover and Shock Tower Set. Made from tough composite material, these parts offer reliable durability and precision fitment—keeping your ARRMA vehicle running strong on the track or trail. 🔧 Features: ✅ Tough composite material for long-lasting durability ✅ Precision-manufactured for consistent fit and easy servicing ✅ Integrated gearbox cover, shock tower, body post mount, upper inner suspension mount, and steering brace ✅ High-specification shock towers built for rough terrain 📦 Includes: (1) Front Gearbox Upper Cover (1) Rear Gearbox Upper Cover

Read more less

Flysky FS-R4P 4-Channel 2.4GHz ANT Receiver Compact. Capable. Reliable.The Flysky FS-R4P is a lightweight, 4-channel receiver designed for use with Flysky transmitters utilizing the ANT protocol. With plug-and-play simplicity and reliable long-range performance, it’s an excellent choice for RC cars, boats, and other surface applications. ✅ Features: 🔁 4-channel PWM output for straightforward servo or ESC control 📶 ANT protocol for fast, stable 2.4GHz signal 🛰️ 100–300 meter ground range for long-distance control 🧲 Integrated single antenna keeps the setup compact and clutter-free ⚡ Wide input voltage range of 3.5–8.4V 🪶 Lightweight and compact at just 6 grams 🔌 Easy plug-and-play setup — ideal for beginners and pros alike 📦 Includes: (1) Flysky FS-R4P 4-Channel Receiver (1) Instruction Manual 📊 Specifications: Channels: 4 Frequency: 2.4GHz Protocol: ANT Range: 328–984ft (100–300m) Input Voltage: 3.5–8.4V Dimensions: 22.6 x 20.6 x 25.5mm (0.89 x 0.81 x 1.0in) Weight: 6g (0.21oz) For RC drivers looking for a simple yet powerful receiver, the FS-R4P is a reliable solution that won’t weigh you down. 🏁  

Read more less

Team Associated RC10B7 Hinge Pin Set Part Number: ASC92496 Keep your suspension smooth and secure with the Team Associated RC10B7 Hinge Pin Set. This replacement set includes all necessary hinge pins for the RC10B7 platform, ensuring your vehicle maintains proper alignment and performance during high-stress racing conditions. ✅ Features: Direct replacement for the Team Associated RC10B7 Precision machined for smooth suspension operation Includes full set of hinge pins for the front and rear Durable construction for long-lasting performance 📦 Includes: (1) Complete hinge pin set for RC10B7 🚗 Compatibility: Team Associated RC10 B7 Team Associated RC10 B7D

Read more less

Team Associated FT 3x27.5mm V2 Chrome Shock Shafts – ASC91620 Smooth, Durable, Factory-Grade Suspension Parts Upgrade or replace your V2 shocks with the Factory Team 3x27.5mm Chrome Shock Shafts, engineered for exceptional performance and longevity. Designed specifically for #91577 buggy rear and #91578 truck front shock bodies, these shafts provide a precise fit with a low-friction chrome finish. ⚙️ Features: ✅ Chrome-coated for reduced stiction and increased durability ✅ Designed for secure screw-mounted piston setup ✅ Factory Team precision for consistent shock action ✅ Ideal for competitive racing environments 📦 Includes: (2) 3x27.5mm V2 Chrome Shock Shafts ✅ Compatibility: #91577 – Buggy Rear Shock Bodies #91578 – Truck Front Shock Bodies Not compatible with E-clip piston systems 🏁 Factory Team quality that keeps your ride smooth and race-ready!

Read more less

Team Associated RC10B74.2 FT 2-Gear Differential Cross Pin Set – ASC92322 Upgrade Your Diff for Maximum Durability. Designed for racers using the two-gear differential configuration, the Factory Team 2-Gear Cross Pin Set includes two solid steel pins built to handle high loads and increase longevity. A must-have for optimizing the performance and reliability of your RC10B74 series buggy. 🔧 Features: ✅ Designed for 2-gear diff setups ✅ Solid steel construction for enhanced strength ✅ Factory Team precision for top-tier durability ✅ Ideal for racers seeking reduced rotating mass 📦 Includes: (2) Solid Steel Cross Pins ✅ Compatibility: RC10B74 RC10B74.1 / B74.1D RC10B74.2 / B74.2D 🏁 Trusted by top drivers—reinforce your differential with this Factory Team upgrade!

Read more less

  Team Associated 3x24mm V2 Chrome Screw Mount Front Shock Shafts (2pcs) Smooth Front-End Performance for Your B74. Upgrade your RC10 B74 with this set of Team Associated 3x24mm V2 Front Shock Shafts. These chrome-finished, screw-mount style shafts offer enhanced durability, smoother shock action, and a secure fit for high-performance 4WD racing. Designed as a direct replacement or tuning option for your front shocks. 🔩 Features: 🧲 Chrome Coated – For smoother shock travel and reduced stiction 🔧 Screw-Mount Piston Design – Secure piston installation (no E-clips required) 💪 Built for long-lasting performance in competitive conditions 📦 Includes: (2) 3x24mm V2 Chrome Screw Mount Shock Shafts ✅ Compatibility: Team Associated RC10 B74 (Original) Fine-tune your B74 suspension and gain the edge with precision Team Associated hardware.

Read more less

Spektrum 3S 2200mAh 30C Smart G2 LiPo Battery – IC3 Connector Smarter Power. Safer Charging. Longer Life. The Spektrum 2200mAh Smart G2 LiPo Battery delivers intelligent performance in a compact 3S configuration — ideal for RC aircraft and vehicles. With no balance lead and automatic charge parameter uploading, this battery simplifies charging and maximizes battery health with minimal effort. Enjoy next-gen Smart tech and peace of mind in every pack. ⚙️ Features: 🔌 IC3 Connector – Also compatible with EC3 🧠 Integrated Smart Microchip – Stores battery data and communicates with Smart chargers 🔋 Self-Discharges to 3.90V/Cell After 72 Hours – Extends battery life and safety 🔧 No Balance Lead Required – One simple connection for charge and balance 🛡 Thicker Internal Plates – Improved durability and heat dissipation 📐 Specifications: Voltage: 11.1V (3S) Capacity: 2200mAh Max Continuous Discharge: 30C Max Charge Rate: 5C Charge Current: 2.2A Battery Type: Smart G2 LiPo Connector Type: IC3 Wire Gauge: 12 AWG Smart Balance Connector: Built-in (G2) Dimensions: 4.4 x 1.34 x 0.96 in (112 x 34 x 24 mm) Weight: 7.4oz (210g) Watt Hours: 24.42Wh Application: Aircraft ⚠️ Note: G2 Smart batteries must be charged with a Spektrum™ G2 Smart Charger or a G1 Smart Charger updated with G2 firmware. Make charging easier, safer, and more efficient with Spektrum Smart G2 battery technology.

Read more less

Gens Ace Redline 2.0 2S Shorty LiHV Battery (7.6V/4400mAh) – 140C Burst Ultra-Lightweight. High Voltage. Race-Ready. The Gens Ace Redline 2.0 4400mAh Shorty LiHV delivers elite-level performance in a compact, lightweight design. Perfect for modified and stock class racing, this pack uses Silicon Graphene technology for ultra-efficient discharge, reduced heat, and excellent cycle life — all in a low-profile shorty layout for ideal chassis balance. ⚙️ Features: ⚡ 140C Continuous Discharge – smooth, consistent power when it matters most 🔋 7.6V LiHV / 4400mAh Capacity – lightweight performance for serious racers 🔌 5mm Bullet Connectors – high-amp, secure, and reliable power transfer 🪶 Ultra Low-Profile Shorty Pack – minimal weight, maximum agility 🧪 Matched cells and advanced stacking for stable output and long life 📐 Specifications: Voltage: 7.6V (2S LiHV) Capacity: 4400mAh Continuous Discharge: 140C Configuration: 2S1P Watt Hours: 33.44Wh Connector: 5mm Bullet Balance Plug: 2mm Bullet Dimensions: 96 x 47 x 18mm Weight: 163.1g (5.75oz) 🏁 For racers demanding every ounce of power in a nimble format, the Redline 2.0 4400mAh Shorty delivers blazing-fast response and unbeatable efficiency on the track.

Read more less

1up Racing LowPro 5mm Bullet Plugs – Ultra-Low Resistance, Pro-Level Finish ⚡ Dial in your wiring setup with 1up Racing LowPro 5mm Bullet Plugs — engineered for elite-level performance and clean installs. These compact, low-profile plugs feature an oversized 6-point contact for rock-solid connections and ultra-low resistance, maximizing efficiency and power delivery. 💡 Designed with a deep solder recess and only 15mm total length, these plugs are ideal for tight spaces and lightweight builds. Perfect for all LiPo batteries with 5mm inputs. ✨ Key Features: 🔩 LowPro Design – Just 15mm long for reduced weight and a cleaner install⚡ Oversized 6-Point Contact – Ensures secure fit and minimal resistance🔥 Easy-Solder Recess – Create strong, clean solder joints with 11–16 gauge wire📦 Universal Fit – Compatible with all LiPo packs using 5mm bullet connectors🛠️ Lightweight & Efficient – Built for performance and durability 📦 What’s in the Box? ✔️ (2) 1up Racing LowPro 5mm Bullet Plugs 💡 Upgrade Your Wiring Game – Get 1up Racing LowPro Bullet Plugs Today!

Read more less

1up Racing Pro Pack w/ Pit Stand – The Ultimate RC Lubrication Kit 🔧 Take your RC maintenance to the next level with the 1up Racing Pro Pack, featuring all four of 1up’s premium lubricants—Clear, Blue, Red, and Gold—plus a slick pit stand to keep your bench organized. Whether you're rebuilding a race rig or refreshing a basher, these Made-in-the-USA lubes are trusted by top-tier racers for a reason: performance, protection, and precision. 💡 Smooth drivetrains, responsive suspension, and long-lasting parts start here. This Pro Pack is your all-in-one solution for buttery bearings, sealed shocks, dialed CV joints, and impact-resistant gears. ✨ What's Inside: 🔍 Clear – Ultra-low resistance bearing oil for max drivetrain efficiency🔵 Blue – O-ring grease for silky-smooth shock and diff action🔴 Red – CV joint oil with extreme slickness and dirt-repelling protection🟡 Gold – Anti-wear grease for drivetrain parts under heavy load🪛 Compact Pit Stand – Keeps your car stable and your pit space clean 📦 Pro Tips for Application: Clear Bearing Oil – 1 drop per bearing after full clean/dry Blue O-Ring Grease – Apply generously to shock/diff o-rings and shaft threads Red CV Joint Oil – 1–2 drops on clean joints for ultra-smooth travel Gold Anti-Wear Grease – Light coat on pins, pulleys, and gear teeth for long life 🛡️ Race-Proven • Factory-Backed • Made in the USA This is the one lube kit that does it all—and does it right. Whether you're tuning 1/10 buggies or beefing up your 1/8 scale basher, the 1up Pro Pack delivers peak performance across your fleet. 💡 Protect Your Investment – Grab the 1up Racing Pro Pack Today!    

Read more less

JConcepts S2 RC10B7 Clear Body w/ Wings (Standard Weight)📦 Includes Two Carpet / Turf / Dirt Wings Give your RC10B7 the competitive edge with the JConcepts S2 body — a low-drag, high-performance shell built for speed and agility on carpet, turf, and dirt tracks. Originally crafted for turf racing, the S2's aggressive styling and optimized aero features have made it a favorite among serious racers. 🔧 Features: 🔹 Designed for the Team Associated RC10B7 🔹 Original JConcepts S2 low-profile styling 🔹 Tight profile hugs the chassis outline 🔹 Dual window, forward cab placement for improved steering response 🔹 Rear sidepod scoops for optional airflow or added downforce 🔹 Recessed scoop on hood can be trimmed for cooling 🔹 Center fin improves high-speed tracking 🔹 Covers spur gear guard for added protection 🔹 Clear polycarbonate with protective film (standard weight) 🔹 Includes window masks & detailed decal sheet 🏁 Includes: (1) S2 Clear Body (Standard Thickness) (2) 6.5" Carpet / Turf / Dirt Wings (1) Window Mask Set (1) JConcepts Decal Sheet 🛠️ Body requires trimming and painting. Compatible with RC10B7 only.

Read more less

JConcepts "P2" Clear Body w/Carpet Wing for RC10 B74Aggressive Styling. Championship Performance. Unleash peak performance and championship-winning design with the JConcepts Punisher 2 (P2) Body for the Team Associated RC10 B74. Inspired by elite drivers like Spencer Rivkin and Dakotah Phend, the P2 is engineered for high-end 1/10 racing with aggressive lines, aerodynamic enhancements, and a killer stance that dominates carpet and turf tracks alike. ✨ Key Features: 💥 Original Punisher 2 Styling – Meanest look in 1/10 racing 🧭 Raised Nose & Taller Cab – Enhances steering feel and downforce 🦾 Rear Winglets & Fin Stabilizer – Improves high-speed tracking & rigidity 🏁 Includes Clear Carpet Wing – Purpose-built for high-grip surfaces 🎨 Clear & Ready for Custom Paint – Show off your team colors and personal flair 🪶 Also available in lightweight (JCO0476L) for weight-sensitive setups 📦 Includes: (1) JConcepts RC10 B74 "P2" Buggy Body (Clear) (1) Carpet-Style Wing (Clear) 🛞 Compatibility: Team Associated RC10 B74 series 1/10 4WD buggies ⚠️ Note: Body comes clear and unpainted. Painted images shown for reference only. 💨 Cut through the air—and the competition—with the P2.

Read more less

  Restore the strength and handling of your X-Maxx with this genuine Traxxas 7731 left lower suspension arm. Built from Traxxas’ high-impact composite material, this arm is designed to take the abuse of hardcore bashing while maintaining precise suspension alignment. Features Official Traxxas 7731 replacement part Fits left lower suspension position High-strength composite construction Direct bolt-on factory fit — no modifications needed Includes (1) Traxxas X-Maxx Left Lower Suspension Arm (7731)

Read more less

  This is a replacement Hobbywing Xerun Super Capacitor Module, intended for use with the Xerun series ESC's.  Features: Super low impedance. Low temperature in working state. Reduces the RF interference to make the RC model more reliable, Improves the burst power when the motor starts to run. Specifications:Capacity: 330uF*2.Voltage: 16V.Impedance: 0.002 ohmRipple Current Endurance: 24 AmpSize: 29mm * 13mm * 13.2mmWeight: 5gSuitable ESC: XERUN and EZRUN series 1/10 scale ESC.

Read more less

  Power. Precision. Performance. Upgrade your ESC with the Hobbywing Module-X Non-Polarity Capacitor Module — engineered to deliver faster throttle response, smoother acceleration, and reduced electrical noise for ultimate racing consistency. Perfect for 1/10-scale Modified or Stock setups, this high-efficiency capacitor pack enhances performance without adding unnecessary weight or bulk. Race-Grade EfficiencyThe Module-X features low impedance and high ripple current endurance, allowing it to absorb voltage spikes and minimize interference caused by rapid ESC switching. The result: improved startup acceleration, lower heat generation, and longer ESC lifespan. Compact and lightweight, it mounts easily on your chassis for a clean, professional installation. ⚡ Features: Greatly improves startup acceleration and throttle response Reduces interference from ESC power switching Low impedance design for higher efficiency Minimal heat generation under load Small, lightweight, and easy to install Designed for 1/10-scale racing applications 📏 Specifications: Size: Standard (1/10-scale) 📦 Includes: (1) Hobbywing Module-X Modified/Stock Non-Polarity Capacitor Module  

Read more less

⚙️ Pre-Assembled Heavy-Duty Slipper Set for MEGA & 3S BLX 4X4 VehiclesUpgrade or replace your drivetrain’s power-handling core with the Arrma MEGA/3S BLX 0.8Mod HD Slipper Set (57T). Designed for strength, smooth operation, and consistent traction, this pre-built assembly comes ready to install — offering a quick and reliable solution for your Arrma 4X4 setup. 🌟 Features Precision-machined aluminum slipper hubs for superior strength and performance Durable 57T 0.8Mod composite spur gear handles powerful brushless systems with ease Castellated slipper pads ensure perfect alignment and consistent engagement Stainless steel slipper plate for smooth operation and long-lasting reliability Pre-assembled and factory-set, ready for drop-in installation Composite lock nut keeps slipper setting secure under high torque loads 📦 Includes (1) Complete Pre-Assembled 57T 0.8Mod Slipper Set ✅ Compatibility Arrma Granite 4X4 MEGA Arrma Big Rock 3S BLX Arrma Senton 4X4 MEGA / 3S BLX Arrma Typhon 4X4 MEGA / 3S BLX 💪 Engineered for reliability and performance — this genuine Arrma HD slipper set delivers the traction, durability, and consistency your 4X4 deserves!

Read more less

  ⚙️ Versatile Hex Adapter Set for 6x30 WheelsUpgrade your setup with the Pro-Line 6x30 to 12mm Hex Adapters, designed for Pro-Line’s Raid Removable Hex Wheels. This set includes both narrow and wide 12mm hexes, giving you perfect compatibility across multiple Traxxas® 2WD and 4WD platforms. Made from high-strength DuPont nylon, these adapters are engineered to withstand the demands of intense RC action. 🌟 Features Replacement Narrow and Wide 6x30 → 12mm Hex Adapters Compatible with all Pro-Line 6x30 Removable Hex Wheels Narrow hexes: fit Stampede®/Rustler® 2WD rear Wide hexes: fit Stampede®/Rustler® 2WD front and Stampede®/Rustler® 4x4 front & rear Made from high-strength, durable DuPont black nylon Built to take a beating in tough off-road conditions Made in the USA since 1982 📦 Includes (2) Narrow 12mm Hexes (for 2WD rear) (2) Wide 12mm Hexes (for 2WD front and 4WD front/rear) ✅ Compatibility Pro-Line 6x30 2.8" Removable Hex Wheels Traxxas Stampede® 2WD Traxxas Rustler® 2WD Traxxas Stampede® 4x4 Traxxas Rustler® 4x4 🧠 Pro-Line quality meets Traxxas toughness — perfect fit, premium materials, and made to last!  

Read more less

Keep your drivetrain smooth and reliable with the Traxxas Rear Differential Ring and Pinion Gear Set. Designed for the Mini Maxx and Mini XRT, this set includes the 47-tooth ring gear and 12-tooth input pinion gear to restore differential performance. ✅ Direct Replacement – OEM fit for Mini Maxx and Mini XRT rear differential✅ Durable Construction – Built to handle high torque and hard bashing✅ Complete Set – Includes both ring gear and input pinion gear✅ Note: Pinion gear is not compatible with optional center differential or slipper clutch Includes: (1) 47T Ring Gear (1) 12T Input Pinion Gear Compatibility: Traxxas Mini Maxx Traxxas Mini XRT Restore smooth, efficient power transfer with the Traxxas 10779 Ring & Pinion Gear Set — tough enough for extreme 1/10 monster truck action.  

Read more less

All-new from Reflex Racing, the 400mAh 7.6V LiHV hardcase battery delivers longer runtime, lower internal resistance, and improved performance compared to the 340mAh pack — with only a 2g weight increase. Built tough in a hardcase design, this pack is made for serious racers. ✅ More Power, Longer Runtime – 400mAh capacity with lower IR for longer races✅ Hardcase Advantage – Better current flow, less heat loss, safer and tougher construction✅ Stable Fitment – Hardcase design keeps the pack solidly in place for smoother handling✅ Efficient Wiring – Bullet plug system reduces clutter and frees up chassis space✅ Wide Compatibility – Fits most AWD cars, RX28 with 24mm conversion kits, and 102mm WB chassis✅ Safe High Voltage – Can be safely charged to 8.6V (LiHV) Specifications: Voltage: 7.6V (LiHV 2S) Capacity: 400mAh Dimensions: 44.5 × 24 × 12.5mm Weight: 19g Recommended Charge Rate: 1.0A Includes: (1) Reflex Racing 400mAh LiHV Hardcase Battery Pack (2) Gold bullet plugs Optional: Use Cable RRE013 (sold separately) for charging. Upgrade your setup with Reflex Racing’s 400mAh LiHV Hardcase Pack — more runtime, smoother handling, and safer construction in one race-winning design.

Read more less

Power your 1/28 scale racer with PN Racing’s V5 LiPo 2S 7.6V HV Hardcase Battery. Built for maximum performance, this pack delivers high voltage under load, low internal resistance, and the reliability racers demand. Includes free charging cable and bullet plugs for easy setup. ✅ High Voltage, Low Resistance – Strong, consistent power delivery during runs✅ Perfect Fit – Designed for 1/28 scale cars including: Atomic: BZ, AMZ, FFZ, MRZ, SZ GL Racing: GLA, GLR, GLR-GT, GLF, GLD RTRC chassis✅ Racing-Grade Specs – 60C discharge rate for explosive performance✅ Durable Hardcase – Protects the pack during intense racing Specifications: Voltage: 7.6V HV (2S) Capacity: 360mAh Recommended Charge Rate: 0.8A C-Rate: 60C Cable: 24AWG Plug: Mini Bullet (includes 2 copper bullet plugs & free charging cable) Charging Cable Plug: JST-PH Type: Rectangular Size: 44.6 x 19.6 x 13mm (+/-0.5mm) Weight: 16.8g (+/-0.1g) Upgrade your Mini-Z or 1/28 scale racer with PN Racing’s V5 LiPo Hardcase — lightweight, powerful, and race-proven.

Read more less

Restore the handling and control of your Arrma 4x4 with this genuine Rear Shock Set. Built tough and pre-filled with shock oil, these shocks are ready to bolt on and get your BigRock, Granite, Senton, or Typhon back in action. High-quality materials for durability and performance Supplied assembled, pre-filled with shock oil Spring spacers included for fine-tuning ride height Fits Arrma Mega 4x4 & BLX 4x4 BigRock, Granite, Senton, and Typhon Requires ARA330460 or ARA330539 springs to complete Includes: (2) assembled shock absorbers. Keep your rig dialed in with the ARA330551 Rear Shock Set — ready for action right out of the bag.

Read more less

Upgrade your suspension setup with the Factory Team 13mm Shock Collar and Seal Retainer Set from Team Associated. This black anodized aluminum set is designed to increase durability and offer a clean, high-performance look. 📦 Includes: (2) Black aluminum shock collars (2) Black aluminum seal retainers ⚙️ Key Features: CNC-machined 6061-T6 aluminum construction Black anodized for a sleek, factory appearance Increased strength over stock plastic parts Designed for precision fit and long-term durability Factory Team tuning part ✅ Compatibility:Fits Team Associated 13mm shocks, commonly used on: RC10B6.4 / B6.4D RC10B74.2 / B74.2D RC10T6.4 RC10SC6.4 And other vehicles equipped with Team Associated 13mm shocks 🏁 Ideal For:Racers looking to improve the consistency, look, and longevity of their suspension setup. Great for both carpet and dirt track performance.

Read more less

Complete your sway bar setup or replace worn components with this genuine RC10B74 Anti-Roll Bar Hardware Set from Team Associated. Designed specifically for the B74 series, this hardware kit ensures your anti-roll bars function smoothly and securely. 🔧 Key Features: OEM replacement hardware for RC10B74 anti-roll bar system Includes mounting pieces and fastening components Precision fit for secure and reliable installation Ideal for fresh builds or routine maintenance 📦 Includes: Anti-roll bar mounting hardware (exact contents may vary) ✅ Compatibility: RC10B74 May fit other B74 platform variants with anti-roll bar setups Maintain consistent suspension balance and performance—use the right hardware for the job with this official Team Associated upgrade.

Read more less

  Keep your wing secure and your rear-end planted with the Team Associated RC10B74 Rear Wing Mount. Designed specifically for the RC10B74 series, this durable wing mount ensures consistent downforce and stability under high-speed cornering and heavy landings. 🔧 Key Features: Durable composite construction Factory Team design and fit Securely mounts the rear wing for improved aerodynamics Lightweight yet strong for competitive racing Direct replacement for stock part 📦 Includes: (1) Rear Wing Mount Assembly ✅ Compatibility: Team Associated RC10B74 May fit other RC10B74-series vehicles (confirm in your manual) Enhance your rear grip and keep your wing locked down with this reliable Factory Team upgrade.

Read more less

1up Racing Curved Glue Tips feature a steel tip which is easy to unclog for extended use. A single tip can last the life of a bottle of glue! Universal fit. For use with Thick viscosity CA glue. Package includes ten tips.

Read more less

Push your Traxxas vehicle to the next level with the VXL-3S Waterproof Electronic Speed Control. Built for pure performance, this ESC is 3S LiPo-capable and designed to handle extreme brushless power with ease. With smooth throttle response, thermal protection, and Traxxas’ legendary waterproofing, you’ll have the confidence to drive flat-out in dirt, snow, mud, or water. Features: Waterproof design for all-weather, all-terrain driving 3S LiPo compatible – unleash 50+ mph speeds in many Traxxas models Optimized for the Velineon brushless motor line Built-in low-voltage detection for LiPo batteries Thermal protection circuitry for reliable performance EZ-Set® push-button setup and programming Includes: (1) Traxxas Velineon VXL-3S Waterproof ESC Compatibility:Direct replacement ESC for many Traxxas brushless-ready vehicles, including Rustler VXL, Bandit VXL, Stampede VXL, and Slash VXL.

Read more less

🔧 Strong, Precise, Race-ReadyThe Team Associated RC10B84 Front Suspension Arms are precision-molded replacement components built to handle the rigors of competitive racing. Designed specifically for the B84 platform, these arms deliver the perfect balance of strength, flexibility, and lightweight performance to maintain consistent handling and durability under extreme conditions. ⚙️ Features: ✅ Direct fit replacement for RC10B84 ✅ Molded composite construction for durability and controlled flex ✅ Maintains proper suspension geometry for predictable handling ✅ Perfect for racers needing fresh arms or spares 📦 Includes: (1) Pair of Front Suspension Arms  

Read more less

Team Associated B6.1/B6.1D Rear Ballstud Mount (91775) Upgrade your suspension adjustability with the Team Associated B6.1/B6.1D Rear Ballstud Mount. This precision-machined part provides a secure mounting point for your rear camber links, allowing for fine-tuned handling and performance. Features: Precision-machined for accurate fit and alignment Provides stable mounting for rear camber link adjustments Durable construction for long-lasting performance Direct replacement for the stock rear ballstud mount Compatibility: Team Associated B6.1 Team Associated B6.1D Includes: (1) Rear Ballstud Mount Perfect for restoring or upgrading your buggy’s rear suspension geometry and tuning options.

Read more less

(For EMB-WRC, EMB-RA, EMB-1, EMB-SC, EMB-DT, EMB-TC, EMB-TG, EMB-MT, LC12B1)

Read more less

  Refresh your steering and suspension with the LC Racing Steering Block, C-Hub & Upright Set, designed for a perfect fit across multiple LC Racing platforms. Built for durability and precision, this set ensures smooth steering response and reliable handling in all conditions. Features: Complete steering block, C-hub, and upright set for a full front-end refresh Durable composite construction for long-lasting performance Precision-molded for accurate fitment and consistent steering geometry Direct replacement for stock parts — no modifications needed Compatibility: EMB-WRC EMB-RA EMB-1 EMB-SC EMB-DT EMB-TC EMB-TG EMB-MT LC12B1 Includes: (2) Steering Blocks (2) C-Hubs (2) Uprights Perfect for restoring tight, responsive steering and dependable suspension performance.

Read more less

Keep your transmission running smoothly with the LC Racing Gear Shaft Set, designed for a perfect fit across multiple EMB series platforms. Built for strength and precision, these shafts ensure reliable gear alignment and efficient power transfer. Features: High-strength metal construction for long-lasting durability Precision-machined for accurate gear mesh and smooth operation Direct replacement for stock gear shafts — easy installation Essential for maintaining drivetrain performance and reliability Compatibility: EMB-WRC EMB-RA EMB-1 EMB-SC EMB-DT EMB-TC EMB-TG EMB-MT LC12B1 Includes: Complete set of gear shafts for compatible models Perfect for keeping your drivetrain strong, smooth, and race-ready.

Read more less

(For EMB-WRC, EMB-RA, EMB-1, EMB-SC, EMB-DT, EMB-TC, EMB-TG, EMB-MT)

Read more less

(For EMB-WRC, EMB-RA, EMB-1, EMB-SC, EMB-DT, EMB-TC, EMB-TG, EMB-MT)

Read more less

(For EMB-WRC, EMB-RA, EMB-1, EMB-SC, EMB-DT, EMB-TG, EMB-MT, LC12B1, PTG-2)

Read more less