Motor Overview:The Team Exalt XLR8 1/8 Sensored Brushless Long Can Truggy Motor is built from the ground up for racers who demand top-tier speed, torque, smoothness, and durability in 1/8 truggy competition. Engineered around a long 74mm can, this motor packs massive punch while maintaining ultra-refined control thanks to its advanced sensing system and premium internal design. A staggered-magnet rotor delivers both low-drag efficiency and huge torque, while the high-purity copper windings and heat-resistant magnet formula ensure consistent performance run after run. Add in a fully rebuildable architecture — including a replaceable sensor board — and you’ve got a high-end truggy motor designed to win championships and take abuse doing it. To keep temps under control even in brutal racing conditions, Exalt uses a 2mm-thick aluminum can paired with ventilation ports that allow airflow in while keeping debris out. The result is a high-power 1/8 truggy motor that stays cool, reliable, and consistent all day long. Features: Long-can 74mm design for extreme torque & power Staggered-magnet rotor for low drag and incredible punch Adjustable timing from 0–40° (CW/CCW) Sensored & sensorless compatible Rebuildable with replaceable sensor board High-purity copper windings High-strength, heat-resistant magnet formula Top-quality alloy steel 5mm output shaft Advanced hall-sensing separation design for smoother throttle response Large vent ports for airflow while blocking debris ROAR Approved! Specifications: Type: Sensored Brushless kV: 2350kV Voltage: 2–4S LiPo (7.4–14.8V) Poles: 4 Timing: 0–40° Adjustable (CW/CCW) Diameter: 41.8mm (1.645") Length: 74mm (2.91") Shaft Diameter: 5mm Shaft Length: 17.7mm (0.696") Weight: 386g (13.6oz) Application: 1/8 Truggy Competition Includes: (1) Team Exalt XLR8 1/8 Sensored Brushless Long Can Truggy Motor (2350kV) (1) Sensor Wire

Read more less

1up Racing Pure Silicone Diff Oil – Precision Tuned, Race Proven  Dial in your drivetrain with 1up Racing Pure Silicone Diff Oil, available in an incredible 34 viscosities from 1K to 4,000,000 cSt. Whether you're hitting a loose off-road layout or chasing tenths on-road, this elite-grade diff oil gives you the precision control and long-lasting performance to match any condition. 🏁 Expertly formulated in Europe using 100% pure silicone—no fillers, no shortcuts—just ultra-consistent fluid that resists breakdown and stays stable run after run. ✨ Key Features: 🔧 1K to 4M cSt Range – Fine-tune your setup with one of the widest diff oil selections available🔬 100% Pure Silicone – No additives or thickeners; consistent performance every time🇪🇺 European-Made – Manufactured to exacting standards for elite RC performance📏 Easy-ID Flip Cap – Large printed cSt rating on lid and front label🧼 Stable Viscosity – Maintains tuning integrity under extreme temps and use 📦 Bottle Size: 60ml each (2oz)🛍️ Mix & Match – Build Your Perfect Tuning Kit! 💼 Don’t forget to pair your diff oils with the 1up Racing Shock & Diff Oil Carrier Bag – keeps 12 bottles clean, upright, and ready for race day. 🧠 Tuned to Win – Trust 1up Diff Oils to Deliver Every Lap

Read more less

1up Racing Pure Silicone Shock Oil – Smooth, Stable, Track-Ready 💧 Achieve the perfect suspension feel with 1up Racing Pure Silicone Shock Oil, crafted for racers who demand precision, consistency, and elite-level control. Offered in 24 viscosities from 200 to 950 cSt, this oil is your go-to for fine-tuning performance in any terrain or temperature. 🏁 Formulated and produced in Europe using 100% pure silicone, 1up’s shock oil stays consistent lap after lap—no fillers, no fade, just ultra-smooth damping for maximum grip and control. ✨ Key Features: 🔧 24 Viscosity Options (200–950 cSt) – Dial in your setup with unmatched precision🔬 100% Pure Silicone – Zero additives, maximum consistency and smoothness🇪🇺 European-Made Quality – High-performance oil manufactured to top-tier standards📏 Easy-ID Flip Cap – Large printed viscosity rating on lid and label for quick access🔥 Stable Under Pressure – Maintains damping feel in hot or cold conditions 📦 Bottle Size: 60ml each (2oz)🛍️ Build Your Complete Suspension Tuning Kit! 💼 Pair with the 1up Racing Shock & Diff Oil Carrier Bag – fits 12 bottles perfectly and keeps your pit organized. 🧠 Suspension That Stays Dialed – Choose 1up for Smooth Control Every Lap 💼 Don’t forget to pair your diff oils with the 1up Racing Shock & Diff Oil Carrier Bag – keeps 12 bottles clean, upright, and ready for race day. 🧠 Tuned to Win – Trust 1up Diff Oils to Deliver Every Lap

Read more less

⚡ Unleash the Full Potential of Your Traxxas Ride This Traxxas 2S 5000mAh LiPo battery with iD connector is built to deliver powerful punch and extended run time for your favorite Traxxas vehicles. Designed for maximum performance, this 25C battery gives you the acceleration, speed, and reliability you demand — all with the convenience of the Traxxas iD system for easy, foolproof charging. 🔋 Battery Specs: Type: LiPo Capacity: 5000mAh Voltage: 7.4V (2S) Discharge Rate: 25C Length: 137mm Width: 43mm Height: 24mm Weight: 9.9oz ✅ Features: Certified Traxxas iD-equipped for safe, easy charging Engineered for high performance and extended run time Fits Traxxas models perfectly — no modifications needed Delivers the power needed for peak speed and acceleration

Read more less

  Achieve pro-level setup accuracy with the JConcepts Aluminum Ride Height Gauge. Machined from billet aluminum, this high-spec tool provides precise measurements from 10–40mm, making it a must-have for competitive off-road racers. With laser-etched markings, smooth pivoting action, and a secure thumbscrew lock, this gauge ensures your ride height adjustments are consistent and repeatable. 🔥 Key Features: Precision-machined from billet aluminum Available in Blue (JCO2282-1) or Black (JCO2282-2) anodizing Laser-etched graduated scale from 10mm–40mm Rounded boss touch point for accurate chassis contact Chamfered silver edging highlights the design Pre-assembled with 4mm pivot hardware & 3mm thumbscrew Includes a latched storage box with foam insert for protection ✅ Compatibility: Works with a wide variety of 1/10 and 1/8 scale on-road and off-road vehicles Ideal for buggies, trucks, and touring cars (TC6/TC7 series) Suitable for any chassis requiring precise ride height adjustments within 10–40mm 📦 Includes: (1) JConcepts Ride Height Gauge (choose Blue or Black) (1) Latched Storage Box with Foam Cushion ⚠️ Tip:Most racers prefer to set ride height with a slight gap (~0.5mm) between the chassis and gauge for best performance.

Read more less

  Upgrade your drivetrain strength and efficiency with the Arrma GP4 Spiral Cut Main Input Gear (10T). Designed for the Kraton 6S EXB, this gear features a spiral cut design for smoother meshing, improved durability, and quieter operation under extreme loads. ✅ Spiral Cut Design – Provides smoother gear engagement and less wear✅ Heavy-Duty Construction – Built to handle high torque and extreme 6S bashing✅ Direct Replacement – Genuine Arrma OEM part for easy installation✅ EXB Strength – Designed specifically for the Kraton EXB drivetrain Includes: (1) GP4 Spiral Cut Main Input Gear (10T) – Part #ARA310979 Compatibility: Arrma Kraton 6S EXB May also fit other 6S BLX / EXB vehicles requiring 10T spiral cut input gear (check manual for exact fitment) Keep your drivetrain running smoother and stronger with the Arrma ARA310979 GP4 Spiral Cut Main Input Gear.  

Read more less

Traxxas Maxx Duty Driveshaft Assembly – Part 8950Tough Enough for Maxx Power. Ready for Action. The Traxxas Maxx Driveshaft Assembly (8950) is a direct replacement for the Maxx 1/10 Brushless 4WD Monster Truck, designed to handle brutal brushless torque and aggressive off-road abuse. Use it in the front or rear to restore performance or keep it on hand as a critical spare. ✅ Maxx-duty design – stronger than stock driveshafts✅ Fully assembled and ready to install✅ Fits front or rear position✅ Perfect for brushless setups and hard-driving conditions✅ Includes screw pin for secure mounting 📦 Includes: (1) Maxx Duty Driveshaft Assembly (Front or Rear) (1) Screw Pin Part #: 8950 💡 Pro Tip: Keep one in your pit box — a snapped driveshaft can end a bash session early.

Read more less

Upgrade your 2WD Traxxas ride with the HD Cold Weather Front Suspension Arm Set. Built from Traxxas’ proprietary heavy-duty composite, these arms are engineered to handle extreme loads, big landings, and cold weather conditions without breaking. Perfect for bashing, racing, or speed runs, they deliver maximum durability with the right amount of flex. ✅ Heavy-Duty Composite – Designed to handle high loads and resist breakage✅ Cold Weather Ready – Maintains strength and flexibility even in low temps✅ Direct Fit Replacement – Easy install with factory precision✅ Extreme Durability – Built for jumps, landings, and high-performance driving Compatibility: Traxxas Slash 2WD Traxxas Stampede 2WD Traxxas Rustler 2WD Includes: (2) HD Cold Weather Front Suspension Arms (Black) ⚡ Send it higher, land it harder — these HD arms are ready for anything.  

Read more less

Upgrade your drivetrain with the Traxxas Rear HD Driveshaft Assembly, built tough with a 6mm axle for maximum durability. Designed for use on the Hoss 4x4, Rustler 4x4, and Slash 4x4, this assembly is required when your vehicle is equipped with the Traxxas Extreme Heavy Duty Suspension Upgrade Kit (TRA9080X). ✅ Heavy-Duty Strength – Built to handle extreme torque and off-road abuse✅ Direct Replacement – OEM fit for Hoss 4x4, Rustler 4x4, and Slash 4x4✅ Complete Assembly – Comes pre-assembled with axle and hardware for quick install✅ For HD Suspension Models – Compatible only with vehicles using the TRA9080X Extreme Heavy Duty Suspension Kit Includes: (1) Rear HD Driveshaft Assembly w/ 6mm axle Required hardware Compatibility: Traxxas Hoss 4x4 (with TRA9080X kit) Traxxas Rustler 4x4 (with TRA9080X kit) Traxxas Slash 4x4 (with TRA9080X kit) Take your 4x4’s durability to the next level with the Traxxas 9052 Rear HD Driveshaft Assembly — built for serious bashing and racing.

Read more less

Reinforced 12mm Hex Set for Heavy Duty Performance Upgrade your drivetrain with the Traxxas Extreme Heavy Duty 12mm Wheel Hex Set — designed specifically for high-stress 4x4 applications. Built for use with the Traxxas Heavy Duty Upgrade Kit (TRA9080), these precision-machined hexes provide a stronger connection between the axle and wheel, ensuring durability under extreme torque loads. Perfect for high-power brushless setups or heavy-duty off-road bashing. 🔥 Key Features: Genuine Traxxas OEM upgrade part Heavy-duty 12mm hexes improve wheel stability and reduce slop Machined for precision fit with TRA9080 suspension components Built to handle extreme torque and off-road abuse Includes steel drive pins for secure installation ✅ Compatibility: Designed for use with models equipped with the Traxxas Heavy Duty Upgrade Kit (TRA9080) only: 🟠 Hoss 4x4 🔵 Rustler 4x4 🟥 Slash 4x4 ⚠️ Not compatible with factory (non-HD) suspension components. 📦 Includes: (4) 12mm Extreme Heavy Duty Wheel Hexes (4) Steel Drive Pins ⚙️ Part Number: 9069

Read more less

Smooth power. Maximum control.Upgrade or replace your Traxxas Hoss® 4X4 VXL drivetrain with this Center Differential Housing Assembly (9081) — precision-built to deliver smoother power transfer and improved handling across all terrains. Designed for durability and balance, this genuine Traxxas component helps your truck stay planted through acceleration, cornering, and jumps. Factory-Engineered PerformanceThis complete assembly includes the center differential, housing, X-ring gaskets, and all necessary hardware. The PTFE-coated washer reduces friction for consistent performance, while the tight-sealing design keeps fluid where it belongs for long-term reliability. 💪 Features: Genuine Traxxas replacement part Smooths out power delivery between front and rear wheels Helps maintain control during high-power launches and turns PTFE-coated washer reduces friction and wear Includes all required gaskets and hardware 📦 Includes: (1) Center Differential Housing (1) Center Differential (2) X-Ring Gaskets (1) 5x10x0.5 PTFE-Coated Washer (4) 2.5x8mm CCS Screws ✅ Compatibility: Traxxas Hoss® 4X4 VXL Traxxas Mini Maxx®  

Read more less

🔩 Reliable Replacement Wheel Hex PinsKeep your wheels locked in and your drivetrain running smoothly with the Arrma 2x10mm Wheel Hex Pins. Designed to fit a variety of Arrma vehicles, these precision pins secure your wheel hexes to the axle, ensuring consistent power delivery and proper wheel alignment. 🌟 Features Precision-machined 2x10mm steel pins Designed for secure wheel hex mounting Durable construction for long-lasting performance Ideal for routine maintenance or repairs Genuine Arrma factory parts ensure perfect fit and reliability 📦 Includes (10) 2x10mm Wheel Hex Pins ✅ Compatibility Compatible with multiple Arrma vehicles using 2x10mm hex pins(Granite, Typhon, Mojave, and similar models — check your manual for fitment.) ⚙️ Stay race-ready with these genuine Arrma replacement pins — small part, big impact!  

Read more less

Upgrade or replace your chassis with the Traxxas Slash 2WD LCG (Low Center of Gravity) Chassis in blue. Designed as a direct replacement for the Traxxas Slash 2WD LCG Conversion Kit (TRA5830), this chassis lowers the truck’s center of gravity for improved handling and cornering performance. ✅ LCG Design – Lowers center of gravity for better stability and tighter cornering✅ Direct Replacement – OEM part for Slash 2WD LCG Conversion Kit (#5830)✅ Durable Construction – Built from high-quality composite material✅ Blue Finish – Adds a custom look to your Slash 2WD build Includes: (1) Blue Slash 2WD LCG Chassis – Part #5832A Compatibility: Traxxas Slash 2WD (when using LCG Conversion Kit #5830) Lower, stronger, and race-ready — the Traxxas 5832A Blue LCG Chassis gives your Slash 2WD the edge on the track.  

Read more less

Keep your Maxx® running strong with these genuine Traxxas replacement stub axle carriers. Designed for durability and precise fit, this left and right set restores smooth performance to your rear suspension system. 🔧 Features: Direct replacement parts for Traxxas Maxx Includes both left and right stub axle carriers Molded for strength and reliability Helps maintain proper alignment and smooth operation 📦 Includes: (1) Left Stub Axle Carrier (1) Right Stub Axle Carrier A must-have spare for racers and bashers—ensure your Maxx stays race-ready and trail-tough!

Read more less

  Handle bigger jumps and rougher terrain with confidence using the Arrma 4S BLX Rear Big Bore Shock Set. Designed for the Kraton and Outcast 4S BLX 4x4, these premium shocks deliver smooth, consistent damping and superior durability. Features: High-quality construction for long-lasting performance Supplied fully assembled without springs Pre-filled with shock oil for fast, easy installation Includes spring spacers for ride height fine-tuning Bolt-on ready — just add your preferred springs Includes: (2) Assembled Rear Shock Absorbers (springs not included) Requires: ARA330533 – Rear Shock Springs (2) Compatibility: Arrma Kraton 4S BLX Arrma Outcast 4S BLX Perfect replacement or upgrade for maximum control and durability on any terrain.

Read more less

Overview:Upgrade your drivetrain with the Traxxas X-Maxx Constant Velocity (CV) Steel Driveshaft. Built for the 8S-spec heavy-duty drivetrain, this CV driveshaft delivers maximum strength, smoother power delivery, and reduced wear under extreme torque loads. It’s the perfect solution for high-power setups and hard bashing where reliability is critical. For owners of the older 6S X-Maxx, this driveshaft can also be used as an upgrade with additional required parts. Features: Heavy-duty steel CV driveshaft for extreme durability Designed for 8S-spec X-Maxx drivetrain Provides smoother, more efficient power transfer Reduces driveline flex and wear Genuine Traxxas factory upgrade Compatibility: X-Maxx 8S – Direct replacement X-Maxx 6S – Upgrade (requires additional parts: 7751X, 7754X, 7768 or 7768R) Includes: (1) Constant Velocity Steel Driveshaft Part Number: 7750X ⚡ Pro Tip: When upgrading a 6S X-Maxx to the 8S-spec drivetrain, grab all the required parts in one go (7751X, 7754X, and 7768 or 7768R) to ensure a smooth installation and bulletproof performance.

Read more less