This is a replacement Traxxas X-Maxx Hardened Steel Suspension Pin Set. This variety pack includes one 4x85mm, three 4x47mm and two 4x33mm.
To fully outfit the X-Maxx you will need four of these packages.
This is a replacement 11-tooth heavy duty front differential pinion gear for the Traxxas X-Maxx. Designed for use with 35-tooth heavy duty ring gear (#7792). Package contains one pinion gear.
Replacement part(s) for these models:X-MAXX WITH 8S ESCModel #77086-4
This is a replacement Traxxas X-Maxx Caster Block Set, including one left and one right side block.
These blocks are marked "Left" and "Right" and must go on the correct side.
This is a replacement Traxxas X-Maxx Steering Block Set, including a left and right side.
These blocks are labeled "Left" and "Right" and must be installed on the correct side.
This is a pack of two replacement Traxxas X-Maxx Upper Suspension Arms. These arms can be used on the front or rear of the vehicle, as well as the right or left side.
This is a replacement Traxxas Differential Gear Set, and is intended for use with the Traxxas XO-1.
COMPATIBILITY:
MAXX WITH 4S ESCModel #89076-4MAXX WITH WIDEMAXXModel #89086-4X-MAXX WITH 8S ESCModel #77086-4
This is a replacement Traxxas X-Maxx Drive Cup for use with the 8S-spec heavy duty driveshaft (TRA7750X) only.
Replacement part(s) for these models:X-MAXX WITH 8S ESCModel #77086-4
This is a replacement Traxxas X-Maxx Skidplate Set. This set includes one front and one rear skidplate, as well as the impact cushions that help absorb the energy from heavy impacts, rather than transferring it directly to the truck.
Traxxas X-Maxx/XRT Aluminum Center Driveshaft Assembly. Package includes one aluminum driveshaft and one gear coupler.
COMPATIBILITY:
Traxxas Maxx
Traxxas XRT
Traxxas Paddle Tires let you tear up sand, snow - and even water! These X-Maxx size paddles are pre-mounted on Black Wheels that will fit the X-Maxx trucks, and will allow you to explore a whole new dimension of traction. Package includes two pre-mounted tires.
COMPATIBILITY:
Traxxas X-Maxx
This is a replacement Traxxas X-Maxx Hardened Steel Shock Mount Suspension Pin Set, including two 4x25mm and two 4x38mm pins. For use in the front or rear.
COMPATIBILITY:
Traxxas X-MaxxTraxxas XRT
This is a replacement Traxxas X-Maxx/XRT Differential Gear Set. This set includes two output gears, four spider gears and two thin diff washers. This set is only good for one differential; front or rear.
When reassembling the differential, be sure to fill it with differential fluid. From the factory, Traxxas filled the diffs with 10,000W in the front and 30,000W in the rear.
COMPATIBILITY:
Traxxas X-MaxxTraxxas XRT
This is a replacement 11-tooth heavy duty rear differential pinion gear for the Traxxas X-Maxx. Designed for use with 35-tooth heavy duty ring gear (#7792). Package contains one pinion gear.
COMPATIBILITY:
Traxxas X-MaxxTraxxas XRT
This is an optional Traxxas X-Maxx Wheelie Bar. This bar comes assembled, including ball bearing wheels. This item is a direct bolt-on to all X-Maxx models.
COMPATIBILITY:
Traxxas X-Maxx
This is an optional rear upper and lower bulkhead for the Traxxas X-Maxx. Designed for use with the 8S Torque-biasing Center Drive. Package contains both the upper and lower bulkhead, and replaces #7727 and #7728.
Note: Requires #5108 ball bearings (2) to complete.
Traxxas X-Maxx Aluminum Toe Links. These optional toe links are made from aluminum to be lighter than steel while maintaining rigidity. Using a hollow tube design, these feature grooves to identify the left hand threads for easy adjustments. Package includes two toe links.
Replacement part(s) for these models:
X-MAXX WITH 8S ESCModel #77086-4
This is a pack of two replacement Traxxas X-Maxx 173mm Molded Composite Toe Links, with installed pillow balls.
These rods are 158mm from center to center.
Replacement part(s) for these models:
X-MAXX WITH 8S ESCModel #77086-4
The Hot Racing Traxxas X-Maxx Aluminum Steering Servo Horn Arm is an aluminum steering rack upgrade for the Traxxas X-Maxx.Features:
CNC machined 6061 aluminum, anodized blue
Replaceable lock nut to help prevent loosening of fasteners
Retains stock double shear design for ultimate reliability
Fits Traxxas 2085 servos
This item replaces Traxxas factory plastic servo horn TRA7747
COMPATIBILITY:
Traxxas X-Maxx
This is an optional Traxxas X-Maxx Tailgate Protector. This protector provides additional strength for rear and corners of the X-Maxx for added durability.
Includes X-Maxx tailgate protector, insert, and 3x8mm flathead hardware.
COMPATIBILITY:
Traxxas X-Maxx
