The Hobbywing Xerun XR10 Pro G2S 160A Sensored Brushless ESC is great for giving the user all the tuning options needed for competitive racing. This Stealth edition is given the Hobbywing FFD (Frameless Fan Design) system for extreme ESC cooling. Get the XR10 G2S and experience true motor control.Hobbywing FFD:A frameless fan is used inside the housing allowing more air to flow through the ESC. With precise maximum airflow, racers will see no additional power draw seen with other fan designs. PWM Adjustments:From preset frequency or the custom frequency settings, tuners can now adjust from 1K - 32K PWM for Throttle and 0.5-16K for Brakes. This allows ultra fine-tuning of throttle and brakes to suit any driver or track condition.Internal BEC:The internal BEC is a switching design and provides up to 10A of power. Adjustable from 5-7.4V, this ESC is designed to handle the most power hungry of servos.NOTE: While the XR10 Pro G2S ESC is equipped with a built-in reverse polarity protection, the external capacitor will still be damaged if a reverse polarity does occur. For full protection an optional Hobbywing Non-polarity Capacitor Module is recommended.Features:
32 Bit, M4 microprocessor for ultimate performance
Frameless fan design for extreme cooling
Reverse polarity protection
Precise adjustments to throttle and brake PWM
Optimized programmable parameters
Extended brake force
Drag Brake Acceleration and Softening Function
High output BEC
Specifications:
Wire gauge: 13 AWG Lightweight Ultra-flex
Application: 1/10th Touring car & Buggy racing, 1/10th drift car and F1
Continuous Current: 160A
Peak Current: 1200A
Input Voltage: 2S LiPo / 4-6S Cell NiMH
BEC Output: BEC voltage of 5-7.4V
Programming device: LCD Program Box / OTA Programmer
Firmware: LCD Program box via USB software (PC only) / OTA (iOS / Android)
Size & Weight: 37.5x30.9x32.5mm (with Fan & Fan Shroud)
Weight: 88g (with wires)
Motor spec recommendation:
Touring Car: >4.5T
Buggy: >5.5T
Includes:
(1) Xerun XR10 Pro G2S 160A Sensored Brushless ESC
(1) Cooling Fan
(1) Capacitors
Decals
Accessory package
The Hobbywing Xerun V10 G4 Competition Stock Brushless Motor has been greatly optimized to provide maximum torque and increased power. With a lower internal resistance, this motor is more efficient and runs cooler when compared to the G3R motors. To further increase performance the motor adopts a fully exposed stator core allowing more airflow over the stator. The motor also features a high-precision endbell plate to improve consistency and structural stability. Dual sensor ports can be found allowing for different wiring setups.Features:
Optimized for more power and torque
Lower internal resistance allows for increased efficiency and cooler running temperatures
Fully exposed stator core for increased cooling effect
High-precision endbell plate to improve consistency
Specifications:Scale: 1/10thTurn: 17.5TkV Rating: 3020kVCell Count: 2-3SNo-Load Current: 3.7AOuter Diameter: 35.8mmLength: 51.4mmShaft Diameter: 3.175Weight: 149gFront Bearing: 9x4x4mmRear Bearing: 8x3x4mmAdjustable Timing: 30-60°Applications: 1/10th Stock Class Racing
The Hobbywing Xerun V10 G4 Competition Stock Brushless Motor has been greatly optimized to provide maximum torque and increased power. With a lower internal resistance, this motor is more efficient and runs cooler when compared to the G3R motors. To further increase performance the motor adopts a fully exposed stator core allowing more airflow over the stator. The motor also features a high-precision endbell plate to improve consistency and structural stability. Dual sensor ports can be found allowing for different wiring setups.Features:
Optimized for more power and torque
Lower internal resistance allows for increased efficiency and cooler running temperatures
Fully exposed stator core for increased cooling effect
High-precision endbell plate to improve consistency
Specifications:Scale: 1/10thTurn: 21.5TkV Rating: 2500kVCell Count: 2-3SNo-Load Current: 3.0AOuter Diameter: 35.8mmLength: 51.4mmShaft Diameter: 3.175mmWeight: 148gFront Bearing: 9x4x4mmRear Bearing: 8x3x4mmAdjustable Timing: 30-60°Applications: 1/10th Stock Class Racing
This is the Hobbywing EZRun 18A Sensorless Brushless ESC and Motor Combo, with an included Program Box. This combo combines an 18 Amp Brushless/Sensorless ESC with a 18.0 Turn, 5200kV Brushless/Sensorless Motor for an electronic package suitable for 1/18 and 1/16 scale on-road and off-road sport fun.
Features:
Compatible with sensorless brushless motors.
High quality components, big current endurance.
Excellent start-up, acceleration and linearity features.
Plenty of programmable items, suitable for various of chassis's, tires and racing tracks.
Multiple protection features: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection.
Internal timing can be changed easily to make the ESC suitable for various of motors.
Easily programmed with the SET button, LED Program Box, Multifunction LCD Program Box and USB Link Software.
ESC firmware can be updated through the USB adapter in the LCD Program Box.
Top quality motor:
Aluminum shell (case)
High quality magnets
Copper wires of high temperature endurance
Good quality bearings
ESC Specifications:Output: Continuous 18A, burst 50A.Input: 4-9 cells NiMH/NiCd or 2-3S LiPo.BEC: 6V/1A (Linear mode built-in BEC).Resistance: 0.01 Ohm.Motor Supported: Sensorless Brushless Motor.Suitable Motor:
With 4-6 cells NiMH/NiCd or 2S Lipo: On-Road≥12T, Off-Road≥8T;
With 6-9 cells NiMH/NiCd or 3S Lipo: On-Road≥18T, Off-Road≥24T;
Suitable Car: 1/18 on-road sport.Cooling Fan: Not included.Size: 31.5mm(L) * 27.5mm(W) * 15mm(H).Weight: 19g (Without wires)
Motor Specifications:kV: 5200Motor Diameter: 20mmMotor Length: 30Shaft Diameter: 2mmShaft Length: 10mmWeight: 46g
Programmer Specifications:Size: 88x58x14mmWeight: 40gInput Weight: 4.8-6V
Includes:
EZRun 18A Brushless/Sensorless ESC
EZRun 2030 18.0T/5200kV Brushless/Sensorless Motor
LED Program Box
Note: The battery lead coming off the ESC uses a Mini Tamiya male plug. You will either need a battery with a Mini Tamiya female plug, or solder on new connectors.
The Hobbywing Xerun XR8 Plus G2S 1/8 Competition Sensored Brushless ESC is the next level in 1/8 competition ESC's. Advancements have been made allowing this ESC to support 48° of boost and turbo timing. When combining this ESC with an optional 4268/4274 G3 motor, the maximum speed can be promoted by 50%. For added protection, this ESC is equipped with advanced thermal protection and reverse polarity protection. These advancements allow for an ESC that is designed to outperform.NOTE: Use appropriate settings provided by the factory or team drivers. Check operating temperature in order to maximize your electronics. The wrong settings may damage the ESC or motor.Features:
Efficient heat dissipation system with lower temperature rise
Durable frameless fan
Internal Reverse Polarity Protection Circuit
RPM speed limit function
Easy Obtain Running Status with Real-time Data Recording Function
Multiple Programmable Items
Capacitor Thermal Protection
Super Internal BEC
Excellent dustproof performance
Ultra-soft 11AWG silicone wire
Customized solder tabs, easy to solder
Specifications:
ESC:
Scale: 1/8th
Waterproof: No
Continuous/Peak ESC Current: 200A/1080A
Input Voltage: 2-6S Lipo
BEC Output: 6-8.4V Adjustable,
Continuous/Peak BEC Current: 6A/15A(Switch-mode)
ESC Programing: SET Button on ESC/LCD Program Box/OTA Programmer
Firmware Upgrade: Supported
Size: 56.1mmx42.1mmx38.5mm
Weight: 122g(w/wires)
Applications: SL BL Motors/SD BL Motors
Vehicles: 1/8th On-Road/Off-Road/Truggy Racing
KV Rating/T Count: 4S LiPo? 4268/4274?3000KV - 6S LiPo?4274?2400KV
Fan:
Size: 30x30x10mm
Voltage Range: 5-8.4V
The Hobbywing XERUN Justock 3650 SD G2.1 Sensored Brushless Motors feature an updated can design over the G2 - and especially G1 - and push the boundaries of an Fixed Timing Motor with lower weight, good heat dissipation and a rebuildable design.
Features:
The use of a heat-resistant magnet attached aluminum case and double insulated windings, high precision bearings, and rotor with a strong structure guarantees outstanding performance and super durability.
The built-in Hall sensor non-adjustable end bell combined with a high precision and balanced rotor guarantees the user a smooth and linear power on demand.
The silicon O-ring seal fitted between the end bell and stator helps to conduct inner heat to the motor case and prevent dust from entering the HALL sensor.
The detachable structure design for daily cleaning and maintenance can effectively prolong the service life of this Justock motor and improve its operating efficiency.
This motor is perfectly matched with the XR10-Justock ESC for all zero timing spec racing and also compatible with other Hobbywing Electronic Speed Controllers including other brands.
This Justock motor is applicable to various 1/10th, 1/12th on-road & off-road vehicles. It can be an ideal choice for Stock or Sport class races but can also be a nice choice for newbies for practice.
The motor design is in compliance with IFMAR, and ROAR specifications.
Specifications:Scale: 1/10, 1/12Brushless: YesSensored: YesPole Count: 2KV Rating: 2450LiPo Cells: 2-3SNo-Load Current(A): 3.5Outer Diameter: 35.9mm (1.413")Length: 52.5mm (2.067")Shaft Diameter: 3.17mm (0.125")Weight: 176g (6.21oz)Timing: FixedApplications: STOCK/SPORT class (choose the motor as per competition rules) of 1/10th , 1/12th On-road (i.e. competition touring car or drift, F1, Mini car, and etc.) and Off-road (i.e. buggy, 2WD SCT & truck) racing, Normal Training, and Rock Crawlers (21.5T & 25.5T only).
This is a replacement Hobbywing Xerun Super Capacitor Module, intended for use with the Xerun series ESC's.
Features:
Super low impedance.
Low temperature in working state.
Reduces the RF interference to make the RC model more reliable,
Improves the burst power when the motor starts to run.
Specifications:Capacity: 330uF*2.Voltage: 16V.Impedance: 0.002 ohmRipple Current Endurance: 24 AmpSize: 29mm * 13mm * 13.2mmWeight: 5gSuitable ESC: XERUN and EZRUN series 1/10 scale ESC.
The Hobbywing 1/10 ESC Switch is a replacement for Hobbywing JUSTOCK, XERUN-120A V2.1, QUICRN-10BL60-Sensored and other Hobbywing 1/10 ESCs that use a slider switch.
This is a Hobbywing Module-XS Modified/Stock Non Polarity Capacitor Module. A capacitor module is for “upgrading” your car ESC. With this capacitor the start-up acceleration of your vehicle will be greatly improved. Besides, the great ripple current endurance significantly reduces the generated interference due to the rapid ON/OFF of the ESC power tube.
Features:
Low impedance, low heat generation, great start-up acceleration. The comparison between HOBBYWING capacitor module and other established brand's capapack.
With the great ripple current endurance, the interference generating from turning on/off of your ESC power tube is remarkably reduced.
With the small size and light weight, it’s easy to install.
Specifications:
Size: Standard (1/10th)
PN:86030005
Capacity: 1700µf
The Hobbywing EZRun MINI28 1/28th Scale Sensored Brushless Combo incorporates revolutionary features in a 1/28th scale package. Built for 1/28th scale racing this powerful ESC is packed with the features needed to provide a competitive advantage on the racetrack while the 1626 brushless motor provides incredible power in a small package. At only 22mm long and 14mm wide the MINI28 ESC will fit in most 1/28 vehicles with ease. To achieve this small size a large aluminum heat sink has been integrated helping to lower temperatures for consistent performance. Even though this ESC is small there are still 26 different adjustable parameters to choose from. With the ability to access these options from a smartphone using the optional Hobbywing OTA module (HWA30850400 - Sold Separately) makes adjustments easier than ever. Packed with features and performance this MINI28 ESC from Hobbywing is an excellent choice for your next 1/28 scale build.
Features:
ESC:
Built specifically for 1/28 scale racing
Small and lightweight design
Large integrated heat sink
Built in dual app mode
High Voltage adjustable BEC
OTA Bluetooth compatible
Motor:
Improved top speed
Precision response
High efficiency with the cool operation
When used with the EzRun Mini28 ESC, timing advance can be used to increase top speeds drastically.
Zero cogging, consistent torque and excellent low-speed response give an amazing feel and driveability
Modular detachable structure, convenient for daily cleaning and maintenance.
Specifications:
ESC:
Cont./Peak Current: 30A / 80A
Motor Type: Sensored / Sensorless Brushless Motors
Motor Limit: 1626 Size Motor
LiPo/NiMH Cells: 2S Lipo
BEC Output: 6V/7.4V Adjustable, 3.5A Peak (Switch-mode)
Size: 22.7x14.2x11.8mm
Weight: 5g (without wires)
Programming Port: Shared with throttle cable
Motor:
kV: 6500
Poles: 2
No-Load Current: 0.6A
Input Voltage: 2S
Motor Diameter: 16mm
Motor Length: 26mm
Motor Shaft Length: 8.5mm
Motor Shaft Diameter: 1.8mm
Weight: 18g
Application: 1/28th Mini
Includes:
(1) EZRun MINI28 1/28th Scale Sensored Brushless ESC
(1) ESC Manual
Various wiring harnesses
(1) EZRun 1626 Sensored Brushless Motor (6500Kv)
The Hobbywing EZRun MINI28 1/28th Scale Sensored Brushless Combo incorporates revolutionary features in a 1/28th scale package. Built for 1/28th scale racing this powerful ESC is packed with the features needed to provide a competitive advantage on the racetrack while the 1626 brushless motor provides incredible power in a small package. At only 22mm long and 14mm wide the MINI28 ESC will fit in most 1/28 vehicles with ease. To achieve this small size a large aluminum heat sink has been integrated helping to lower temperatures for consistent performance. Even though this ESC is small there are still 26 different adjustable parameters to choose from. With the ability to access these options from a smartphone using the optional Hobbywing OTA module (HWA30850400 - Sold Separately) makes adjustments easier than ever. Packed with features and performance this MINI28 ESC from Hobbywing is an excellent choice for your next 1/28 scale build.
Features:
ESC:
Built specifically for 1/28 scale racing
Small and lightweight design
Large integrated heat sink
Built in dual app mode
High Voltage adjustable BEC
OTA Bluetooth compatible
Motor:
Improved top speed
Precision response
High efficiency with the cool operation
When used with the EzRun Mini28 ESC, timing advance can be used to increase top speeds drastically.
Zero cogging, consistent torque and excellent low-speed response give an amazing feel and driveability
Modular detachable structure, convenient for daily cleaning and maintenance.
Specifications:
ESC:
Cont./Peak Current: 30A / 80A
Motor Type: Sensored / Sensorless Brushless Motors
Motor Limit: 1626 Size Motor
LiPo/NiMH Cells: 2S Lipo
BEC Output: 6V/7.4V Adjustable, 3.5A Peak (Switch-mode)
Size: 22.7x14.2x11.8mm
Weight: 5g (without wires)
Programming Port: Shared with throttle cable
Motor:
kV: 5000
Poles: 2
No-Load Current: 0.5A
Input Voltage: 2S
Motor Diameter: 16mm
Motor Length: 26mm
Motor Shaft Length: 8.5mm
Motor Shaft Diameter: 1.8mm
Weight: 18g
Application: 1/28th Mini
Includes:
(1) EZRun MINI28 1/28th Scale Sensored Brushless ESC
(1) ESC Manual
Various wiring harnesses
(1) EZRun 1626 Sensored Brushless Motor (5000Kv)
The Hobbywing EZRun MINI28 1/28th Scale Sensored Brushless Combo incorporates revolutionary features in a 1/28th scale package. Built for 1/28th scale racing this powerful ESC is packed with the features needed to provide a competitive advantage on the racetrack while the 1626 brushless motor provides incredible power in a small package. At only 22mm long and 14mm wide the MINI28 ESC will fit in most 1/28 vehicles with ease. To achieve this small size a large aluminum heat sink has been integrated helping to lower temperatures for consistent performance. Even though this ESC is small there are still 26 different adjustable parameters to choose from. With the ability to access these options from a smartphone using the optional Hobbywing OTA module (HWA30850400 - Sold Separately) makes adjustments easier than ever. Packed with features and performance this MINI28 ESC from Hobbywing is an excellent choice for your next 1/28 scale build.
Features:
ESC:
Built specifically for 1/28 scale racing
Small and lightweight design
Large integrated heat sink
Built in dual app mode
High Voltage adjustable BEC
OTA Bluetooth compatible
Motor:
Improved top speed
Precision response
High efficiency with the cool operation
When used with the EzRun Mini28 ESC, timing advance can be used to increase top speeds drastically.
Zero cogging, consistent torque and excellent low-speed response give an amazing feel and driveability
Modular detachable structure, convenient for daily cleaning and maintenance.
Specifications:
ESC:
Cont./Peak Current: 30A / 80A
Motor Type: Sensored / Sensorless Brushless Motors
Motor Limit: 1626 Size Motor
LiPo/NiMH Cells: 2S Lipo
BEC Output: 6V/7.4V Adjustable, 3.5A Peak (Switch-mode)
Size: 22.7x14.2x11.8mm
Weight: 5g (without wires)
Programming Port: Shared with throttle cable
Motor:
kV: 3500
Poles: 2
No-Load Current: 0.4A
Input Voltage: 2S
Motor Diameter: 16mm
Motor Length: 26mm
Motor Shaft Length: 8.5mm
Motor Shaft Diameter: 1.8mm
Weight: 18g
Application: 1/28th Mini
Includes:
(1) EZRun MINI28 1/28th Scale Sensored Brushless ESC
(1) ESC Manual
Various wiring harnesses
(1) EZRun 1626 Sensored Brushless Motor (3500Kv)