FOLLOW "BOSSMAN42" ON KICK.COM & GET ENTERED TO WIN A MINI-Z READY SET!

MINI CRAWLERS

155 products

  • Last stock! Axial AX24 XC-1 1/24 4WD RTR 4WS Mini Crawler  w/2.4GHz Radio, Battery & Charger Axial AX24 XC-1 1/24 4WD RTR 4WS Mini Crawler  w/2.4GHz Radio, Battery & Charger

    Axial AX24 XC-1 1/24 4WD RTR 4WS Mini Crawler w/2.4GHz Radio, Battery & Charger

    1 in stock

    The Axial AX24 XC-1 1/24 4WD Ready to Run Mini 4WS Crawler is designed to push the limits of 1/24 RTR crawlers. The AX24 platform provides stability, durability, high clearance, generous articulation, and everything else extreme rock crawling enthusiasts need to overcome the impossible. Flat chassis side plates with rock sliders help you move through tight formations. Long travel shocks, a 4-link suspension, and a worm gear drivetrain combine for easy handling, dependable power delivery, and the ability to clear rough terrain. With 4-Wheel Steer, there are three transmitter-activated steering modes — for no rear tire input, mirrored rear tire input, or "crab crawl".The AX24 XC-1 isn't just for experienced RC rock crawling hobbyists. Everyone will find it to be a highly capable mini crawler to run on indoor or outdoor courses. Get ready to push past boundaries and conquer more trails with the Axial AX24 XC-1 Rock Crawler RTR. This AX24 includes everything you need to get out and start having fun!   Axial® AX24™ XC-1™ 4WS 4WD RTR   Features: Three 4-wheel steering (4WS) modes give all drivers terrain conquering ability. Side plate chassis allows greater articulation for improved handling over rough terrain. LED rock lights mounted in the rock sliders keep your path visible in low light. 1.0" Rockster wheels and Rock Lizards tires produce trail-taming traction. Fully equipped — you can hit the trails almost immediately! Specifications:Scale: 1/24Length: 7.8" (198 mm)Width: 4.5" (114 mm)Height: 3.7" (94 mm)Ground Clearance: 1.3 in (34mm)Wheelbase: 5.3" (135 mm)Drivetrain: 4WDPower Type: ElectricConnector Type: PH 2.0 (High-Current Ultra Micro)Motor Type: BrushedPinion: 11TSpur Gear: 55TCompletion Level: Ready-To-RunIncludes: (1) Axial AX24 XC-1 1/24 Scale 4WS RTR Rock Crawler (1) Spektrum SLT3 2.4GHz 3-Channel Radio System (4) AA Transmitter Batteries (1) Dynamite 350mAh 2S 7.4V LiPo (1) 0.5 Amp USB Charger (1) Product Manual Needed to Complete: Nothing! Everything you need to get out and have fun is in the box!

    1 in stock

    $256.60

  • Last stock! Axial SCX24 2021 Ford Bronco Hard Body 1/24 4WD RTR Scale Mini Crawler w/2.4GHz Radio Axial SCX24 2021 Ford Bronco Hard Body 1/24 4WD RTR Scale Mini Crawler w/2.4GHz Radio

    Axial SCX24 2021 Ford Bronco Hard Body 1/24 4WD RTR Scale Mini Crawler w/2.4GHz Radio

    1 in stock

    Axial SCX24 2021 Ford Bronco - Hard Body 1/24 Scale Mini Scale Crawler! The Axial SCX24 2021 Ford Bronco comes out of the box fully assembled and ready-to-run. The SCX24 '21 Bronco features an exceptionally detailed and extra-durable ABS hard body! This authentic scale body is available in three color options based on current Ford Bronco factory colors. Details include molded door handles, mirrors, roof rails, a mounted spare tire and an optional second decal sheet to allow a personalized finish. Serious scale modelers will find that this Ford Bronco not only looks great and performs well, but also brings next level realism to the SCX24 platform. Complementing the detail of the scale Ford Bronco body, Axial includes officially licensed Factory Ford Wildtrak wheels and Nitto Trail Grappler M/T tires. The SCX24 Bronco is built on the proven and easy to drive SCX24 chassis. The SCX24 makes it easy to find RC adventures. Go crawling on your desk. Turn a messy room into an obstacle course. Build an indoor "crawl course table" - or take your SCX24 outdoors and set up an exciting trail with a few holes, twigs, and rocks. Whatever course you follow, the SCX24 chassis meets every challenge with full-time 4-wheel drive, a trail-taming 3-link front/4-link rear suspension, and much more. Realistic steel frame rails stand up to hard knocks. Worm gears on the axles increase ground clearance. Steel front and rear axles, front stub axles and steel dogbones let you crawl and climb with confidence. Power is supplied by a Dynamite 88T 180-size motor and 2S LiPo battery, while a 3-channel Horizon Hobby 2.4GHz radio system is included for precise, dependable control. So everything you need to hit the trails is in the box!  Axial SCX24 Ford Bronco   Features: Factory-assembled and ready-to-run, with 3-channel radio, 180 brushed motor, servo, ESC/receiver unit and "AA" transmitter batteries included Officially licensed Ford Bronco ABS hard body with molded door handles, mirrors, roof rails, and a tire mount with spare tire Bonus second decal sheet for optional customization Nitto Trail Grappler M/T tires mounted on Factory Ford Wildtrak wheels Working lights in front, with molded lenses on all four corners of the body True full-time 4-wheel drive Durable solid axle front and rear suspension and coilover shocks for optimal handling and crawling performance Worm drive gears in front and rear differentials increase ground clearance Sturdy steel C-channel frame rails with bracing for added strength and proper alignment Durable steel axles provide strength and durability to match tough climbs and rough trails 2-Year limited warranty (see product manual for details) Specifications: Height: 4.625" (117 mm) Front Track: 3.938 in (100.0mm) Width: 3.875" (98 mm) Rear Track: 3.938 in (100.0mm) Wheelbase: 5.19" (132 mm) Length: 8.75" (222 mm) Includes: (1) Axial® SCX24™ Ford Bronco 1/24 Scale 4WD RTR (1) Horizon Hobby® 2.4GHz 3-Channel Radio System (1) Axial® AS-1 Micro Servo (1) Horizon Hobby® ESC/Receiver Combo (1) Dynamite® USB LiPo Charger (1) Dynamite® 88T 180-Size Brushed Electric Motor With Pinion (1) Dynamite® 350mAh 2S 30C 7.4V LiPo Battery (4) AA Batteries for Transmitter (2) Decal Sheets (1) Product Manual Needed to Complete: Everything you need to drive is included

    1 in stock

    $256.60

  • Last stock! Axial SCX24 2019 Jeep Wrangler JLU CRC 1/24 4WD RTR Scale Mini Crawler w/2.4GHz Radio Axial SCX24 2019 Jeep Wrangler JLU CRC 1/24 4WD RTR Scale Mini Crawler w/2.4GHz Radio

    Axial SCX24 2019 Jeep Wrangler JLU CRC 1/24 4WD RTR Scale Mini Crawler w/2.4GHz Radio

    1 in stock

    No matter where you are, the 1/24 scale Axial® SCX24™ Jeep® Wrangler JLU CRC 4WD makes it the scene for RC adventures. If you’re stuck at work, go crawling on your desk. A messy room becomes an ideal obstacle course. Take your vehicle outside — where its water-resistant electronics are safe from the elements — and set up an exciting trail with a few holes, twigs, and rocks. Full-time 4WD and a 3-link front/4-link rear suspension let you muscle over big challenges. Worm gears on the axles increase ground clearance, while realistic steel frame rails stand up to hard knocks. The Axial® SCX24™ Jeep® Wrangler JLU CRC performs like a winner and looks like one, too. The realistic body rides on licensed KMC Machete wheels and Nitto Trail Grappler tires. For quick battery access, just remove one clip to tilt back the body. Two LEDs in the front bumper light up the trail for night-time crawling. The SCX24™ Jeep® Wrangler JLU CRC comes ready-to-run with radio and electronics included and installed. Full-time 4WD and a 3-link front/4-link rear suspension let you muscle over big challenges. Worm gears on the axles increase ground clearance, while realistic steel frame rails stand up to hard knocks. The Axial SCX24 Jeep Wrangler JLU CRC performs like a winner. The detailed body rides on licensed KMC Machete wheels with scale Nitto Trail Grappler tires. The body uses a hinged designed, allowing for quick battery access for less downtime on the trails. Two LEDs are preinstalled into the front bumper for great night crawling options. The SCX24 Jeep Wrangler JLU CRC comes ready-to-run with radio and electronics included and installed. Features: 3-Link front and 4-link rear suspension for optimal handling Two LED lights are included in the front bumper for night driving Realistic steel frame rails add strength True, full-time 4-wheel-drive Comes with ESC, motor, and servo already installed Specifications:Scale: 1/24Length: 7.8" (198mm)Width: 3.9" (99mm)Height: 4.2" (107mm)Wheelbase: 5.2" (132mm)Ground Clearance: 1.06" (27mm)Front Track Width: 3.9" (99.5mm)Rear Track Width: 3.9" (99.5mm)Tire Tread: Nitto Trail GrapplerWheel Width: 0.48" (12.4mm)Pinion: 10TSpur: 55TDifferential: 16T/4T (Worm Gear)Includes: (1) 1/24 Axial SCX24 2019 Jeep Wrangler JLU CRC 4WD Rock Crawler Brushed RTR with (1) ESC/Receiver (installed) (1) 88T Motor (installed) (1) AS-1 Micro Servo (installed) (1) 4-Channel 2.4Ghz Surface Transmitter (1) Dynamite 7.4v 350mAh 2S LiPo Battery (1) USB Charger (4) AA Batteries Needed to Complete: Nothing! Everything you need to get crawling is in the box.

    1 in stock

    $216.50

  • Last stock! Axial SCX24 1967 Chevrolet C10 1/24 4WD RTR Scale Mini Crawler (Green) w/2.4GHz Radio Axial SCX24 1967 Chevrolet C10 1/24 4WD RTR Scale Mini Crawler (Green) w/2.4GHz Radio

    Axial SCX24 1967 Chevrolet C10 1/24 4WD RTR Scale Mini Crawler (Green) w/2.4GHz Radio

    2 in stock

    The detailed, ready-to-run 1967 Chevrolet C10 Truck is the latest model in the popular SCX24™ series from Axial® Racing. Its compact, versatile 1/24 scale size opens up almost any environment to spur-of-the-moment RC crawling expeditions. When it’s time for a break at work, set up an obstacle course with items on your desk for the SCX24™ Chevrolet C10 Truck to negotiate. Any room at home can also become the setting for exciting feats and contests. If you’d rather run outdoors, go for it! Collect some twigs and marble-size rocks, dig a few holes, and soon you’ll have a challenging trail for fresh air adventuring. Your truck’s water-resistant electronics save you from having to worry about wet track conditions when you crawl. With its realistic steel chassis frame rails, steel front and rear axles, and steel dogbones, this model has the strength to deliver Axial®-caliber crawling performance even in 1/24 scale. It’s designed to keep right on running through rough trails and tough climbs. The SCX24™ 1967 Chevrolet C10 comes ready-to-run with all of the electronics, transmitter, receiver, servos, motor, ESC, batteries and charger included. Axial® AS-1 servo with servo saver Dynamite® 7.4V 350mAh 30C LiPo battery Dynamite® 180-size, 88T Brushed Electric Motor Realistic 1967 Chevrolet C10 Truck body Two bright LEDs in front bumper for night driving True, full-time 4-wheel drive 3-Link front and 4-link rear suspension for optimal handling Worm drive gears for front and rear axles that add ground clearance Realistic steel frame rails for added strength Hinged body system for easy access to on-board components Full ball bearing drivetrain Licensed wheels modeled after 1:1 Method Wheels Licensed tires modeled after 1:1 BF Goodrich Tires

    2 in stock

    $216.50

  • Last stock! Furitek SCX24 Stinger Brushless Power System w/1212-3450kV Brushless Motor Furitek SCX24 Stinger Brushless Power System w/1212-3450kV Brushless Motor

    Furitek SCX24 Stinger Brushless Power System w/1212-3450kV Brushless Motor

    1 in stock

    The Furitek SCX24 Stinger Brushless Power System with 1212-3450kV Brushless Motor is a great way to get a light weight, high torque power system. This incredible combo includes the Furitek Micro Komodo Motor (FTK-FUR-2100). Don't let the size of this motor fool you, this 12-pole motor was specifically designed to provide high torque at low RPM. The included Lizard Pro ESC allows you to get the most out of this small but mighty motor.Features: Designed specifically for the Axial SCX24 Includes the Furitek Micro Komodo Motor FTK-FUR-2100 12-pole motor design allows for high torque at low RPM Includes Micro Komodo Motor Mount Includes the Furitek Lizard Pro ESC Includes: (1) Lizard Pro 30A/50A Brushed/Brushless ESC (1) Bluetooth module (1) Micro Komodo 1212-3450KV brushless motor (1) 11T 0.3M CNC Brass Pinion (1) CNC aluminum motor mount COMPATIBILITY: Axial SCX24

    1 in stock

    $208.48

  • Last stock! Axial SCX24 Deadbolt 1/24 RTR Scale Mini Crawler (Red) w/2.4GHz Radio Axial SCX24 Deadbolt 1/24 RTR Scale Mini Crawler (Red) w/2.4GHz Radio

    Axial SCX24 Deadbolt 1/24 RTR Scale Mini Crawler (Red) w/2.4GHz Radio

    1 in stock

    The SCX24 Deadbolt 4WD is the first Axial off-roader in 1/24 scale. At less than 8" long, it's the perfect rig to take along on outdoor OR indoor adventures - offering factory-assembled ease, scale looks, and confident handling on any trail. Features Includes 3 channel radio system, ESC and transmitter batteries Includes motor and on-board LiPo battery Realistic narrow-stance rock crawler body in olive green or red Molded roll cage with realistic light bar Realistic driver figure and many other scale details Officially licensed KMC XD229 Machete Crawl wheels Officially licensed Nitto Trail Grappler M/T tires (S30 compound, large block tread) Full-time 4WD Splined and sleeved front and rear drive shafts allow for maximum suspension travel while keeping the power to the wheels Steel front and rear axles, front stub axles and dogbones provide strength and durability Rugged steel C-channel frame rails with bracing keep everything rigid and aligned Front and rear axles consist of a two-piece, molded plastic solid axle design 3-Link front and 4-link rear suspension supply optimal handling Coil-over shocks with simulated reservoir and durable plastic suspension links deliver proven Axial crawling performance Front and rear differentials each house a worm gear setup to power the axles and create higher ground clearance. Worm gear drive also provides a low gear ratio to reduce torque twist Two LEDs in the front bumper for night driving Needed to Complete Nothing! Everything you need to begin having fun with your 1/24 scale Deadbolt is included! What's in the Box? (1) SCX24™ Deadbolt™ 1/24 Scale 4WD Truck (1) Axial AE-6 ESC/receiver combo (installed) (1) Dynamite® 88T brushed electric motor (installed) (1) Axial AS-1 steering servo (installed) (1) Axial® AX-4 2.4GHz 3-channel radio (4) AA transmitter batteries (1) 350mAh 2S 7.4V LiPo battery (1) USB LiPo charger (1) Product Manual Overview The SCX24™ Deadbolt™ 4WD is the first Axial® off-roader in 1/24 scale. At less than 8" long, it's the perfect rig to take along on your hiking, camping, and other outdoor and indoor adventures — offering factory-assembled ease, scale looks, and confident handling on any trail. Even new modelers driving the SCX24 chassis will be well-equipped to tackle tough climbs and rough trails. Like the larger SCX10™ II chassis, this smaller version uses plenty of steel components — from the C-channel frame rails to the front and rear axles and dogbones. Even over off-road, mountainous, rocky and desert terrain, it has the strength to keep pushing onward and upward. For the most reliable handling, the SCX24 chassis features a three-link front and four-link rear suspension. The combination of coil-over shocks and durable plastic suspension links delivers Axial-worthy crawling performance even at this small scale. The worm gear drive setup permits a high ground clearance plus a low gear ratio that reduces torque twist. Powered by an included 180-size motor and LiPo battery, the SCX24 Deadbolt shows off competence and charisma on the trails. Check out that Deadbolt body — with its narrow stance, bulging hood, realistic driver figure, and molded roll cage with realistic light bar. The realism continues right down to the ground, where you'll find licensed KMC XD229 Machete Crawl wheels wrapped in Nitto Trail Grappler tires. Adding even more to its beginner appeal, the SCX24 Deadbolt comes 100% complete and ready to run. Everything required for action is in the box: assembled and finished vehicle; Axial 3-channel 2.4GHz radio system with servo and ESC/receiver unit; Dynamite® 88T brushed electric motor and 350mAh 2S 7.4V LiPo battery; USB LiPo charger; and even four AA cells for the transmitter!   STEEL C-CHANNEL CHASSIS FRAME RAILS Just like the 1/10th scale SCX10™ II platform, the SCX24™ chassis features rugged and sturdy steel c-channel frame rails with bracing to keep everything intact and aligned.   DYNAMITE® 88T BRUSHED MOTOR The Dynamite 88T brushed electric motor provides the right amount of torque to help ascend steep climbs. It's mated to a steel motor mount to keep flex to a minimum, which helps protect the gears.   WORM GEARS The front and rear differentials each house a worm screw and worm gear setup to get the power to the axles and create higher ground clearance.   DURABLE STEEL AXLES Steel front and rear axles, front stub axles along with steel dogbones provide strength and durability to keep things running during tough climbs and rough trails.   SPLINED DRIVE SHAFTS The front and rear drive shafts are splined and sleeved to allow for maximum suspension travel while keeping the power to the wheels.   COILOVER SHOCK ABSORBERS Even at this small scale, the combination of coilover shocks with simulated reservoirs and durable plastic suspension links delivers the crawling performance you've known and expect from Axial.   FRONT AND REAR SOLID AXLES The front and rear axles consist of a two piece, molded plastic solid axle design. For optimal handling, the SCX24™ suspension features a three-link front and four-link rear setup.   LED LIGHTS INCLUDED Two bright LED lights are included and are mounted in the front bumper. An extra LED light port on the ESC allows you to add optional LED lights.   4-LINK REAR SUSPENSION The suspension geometry utilizes a 4-Link design for the rear which is optimized to reduce axle steer and torque twist. We've also included extra suspension links for adjusting your wheelbase length.   KMC XD229 MACHETE CRAWL WHEELS & NITTO TRAIL GRAPPLER M/T TIRES Officially licensed KMC XD Machete wheels are legendary in the off-road world. They are molded in black and feature stunning scale details, despite the small scale. The officially licensed Nitto Trail Grappler M/T Tires offer a fantastic blend of off-road performance while still retaining excellent composure for on-road use.   HINGED BODY SYSTEM The hinged body system offers easy access to on-board components. You can quickly reach the battery and chassis by removing just two body clips and swinging the body up.   FULL BALL BEARINGS Just because the SCX24™ is smaller in size doesn't mean the features need to follow suit. No bushings found here, instead the drivetrain is freely spinning on sealed cartridge bearings throughout the entire vehicle.   AXIAL AS-1 SERVO Mounted just above the front axle is the Axial AS-1 servo, with a servo saver that allows for steering accuracy, while also providing protection for the servo gears in the event of a bind or impact.   Specifications Color Variant: RED

    1 in stock

    $200.46

  • Last stock! Axial SCX24 Deadbolt 1/24 RTR Scale Mini Crawler (Green) w/2.4GHz Radio Axial SCX24 Deadbolt 1/24 RTR Scale Mini Crawler (Green) w/2.4GHz Radio

    Axial SCX24 Deadbolt 1/24 RTR Scale Mini Crawler (Green) w/2.4GHz Radio

    1 in stock

    The SCX24 Deadbolt 4WD is the first Axial off-roader in 1/24 scale. At less than 8" long, it's the perfect rig to take along on outdoor OR indoor adventures - offering factory-assembled ease, scale looks, and confident handling on any trail. Features Includes 3 channel radio system, ESC and transmitter batteries Includes motor and on-board LiPo battery Realistic narrow-stance rock crawler body in olive green or red Molded roll cage with realistic light bar Realistic driver figure and many other scale details Officially licensed KMC XD229 Machete Crawl wheels Officially licensed Nitto Trail Grappler M/T tires (S30 compound, large block tread) Full-time 4WD Splined and sleeved front and rear drive shafts allow for maximum suspension travel while keeping the power to the wheels Steel front and rear axles, front stub axles and dogbones provide strength and durability Rugged steel C-channel frame rails with bracing keep everything rigid and aligned Front and rear axles consist of a two-piece, molded plastic solid axle design 3-Link front and 4-link rear suspension supply optimal handling Coil-over shocks with simulated reservoir and durable plastic suspension links deliver proven Axial crawling performance Front and rear differentials each house a worm gear setup to power the axles and create higher ground clearance. Worm gear drive also provides a low gear ratio to reduce torque twist Two LEDs in the front bumper for night driving Needed to Complete Nothing! Everything you need to begin having fun with your 1/24 scale Deadbolt is included! What's in the Box? (1) SCX24™ Deadbolt™ 1/24 Scale 4WD Truck (1) Axial AE-6 ESC/receiver combo (installed) (1) Dynamite® 88T brushed electric motor (installed) (1) Axial AS-1 steering servo (installed) (1) Axial® AX-4 2.4GHz 3-channel radio (4) AA transmitter batteries (1) 350mAh 2S 7.4V LiPo battery (1) USB LiPo charger (1) Product Manual Overview The SCX24™ Deadbolt™ 4WD is the first Axial® off-roader in 1/24 scale. At less than 8" long, it's the perfect rig to take along on your hiking, camping, and other outdoor and indoor adventures — offering factory-assembled ease, scale looks, and confident handling on any trail. Even new modelers driving the SCX24 chassis will be well-equipped to tackle tough climbs and rough trails. Like the larger SCX10™ II chassis, this smaller version uses plenty of steel components — from the C-channel frame rails to the front and rear axles and dogbones. Even over off-road, mountainous, rocky and desert terrain, it has the strength to keep pushing onward and upward. For the most reliable handling, the SCX24 chassis features a three-link front and four-link rear suspension. The combination of coil-over shocks and durable plastic suspension links delivers Axial-worthy crawling performance even at this small scale. The worm gear drive setup permits a high ground clearance plus a low gear ratio that reduces torque twist. Powered by an included 180-size motor and LiPo battery, the SCX24 Deadbolt shows off competence and charisma on the trails. Check out that Deadbolt body — with its narrow stance, bulging hood, realistic driver figure, and molded roll cage with realistic light bar. The realism continues right down to the ground, where you'll find licensed KMC XD229 Machete Crawl wheels wrapped in Nitto Trail Grappler tires. Adding even more to its beginner appeal, the SCX24 Deadbolt comes 100% complete and ready to run. Everything required for action is in the box: assembled and finished vehicle; Axial 3-channel 2.4GHz radio system with servo and ESC/receiver unit; Dynamite® 88T brushed electric motor and 350mAh 2S 7.4V LiPo battery; USB LiPo charger; and even four AA cells for the transmitter!   STEEL C-CHANNEL CHASSIS FRAME RAILS Just like the 1/10th scale SCX10™ II platform, the SCX24™ chassis features rugged and sturdy steel c-channel frame rails with bracing to keep everything intact and aligned.   DYNAMITE® 88T BRUSHED MOTOR The Dynamite 88T brushed electric motor provides the right amount of torque to help ascend steep climbs. It's mated to a steel motor mount to keep flex to a minimum, which helps protect the gears.   WORM GEARS The front and rear differentials each house a worm screw and worm gear setup to get the power to the axles and create higher ground clearance.   DURABLE STEEL AXLES Steel front and rear axles, front stub axles along with steel dogbones provide strength and durability to keep things running during tough climbs and rough trails.   SPLINED DRIVE SHAFTS The front and rear drive shafts are splined and sleeved to allow for maximum suspension travel while keeping the power to the wheels.   COILOVER SHOCK ABSORBERS Even at this small scale, the combination of coilover shocks with simulated reservoirs and durable plastic suspension links delivers the crawling performance you've known and expect from Axial.   FRONT AND REAR SOLID AXLES The front and rear axles consist of a two piece, molded plastic solid axle design. For optimal handling, the SCX24™ suspension features a three-link front and four-link rear setup.   LED LIGHTS INCLUDED Two bright LED lights are included and are mounted in the front bumper. An extra LED light port on the ESC allows you to add optional LED lights.   4-LINK REAR SUSPENSION The suspension geometry utilizes a 4-Link design for the rear which is optimized to reduce axle steer and torque twist. We've also included extra suspension links for adjusting your wheelbase length.   KMC XD229 MACHETE CRAWL WHEELS & NITTO TRAIL GRAPPLER M/T TIRES Officially licensed KMC XD Machete wheels are legendary in the off-road world. They are molded in black and feature stunning scale details, despite the small scale. The officially licensed Nitto Trail Grappler M/T Tires offer a fantastic blend of off-road performance while still retaining excellent composure for on-road use.   HINGED BODY SYSTEM The hinged body system offers easy access to on-board components. You can quickly reach the battery and chassis by removing just two body clips and swinging the body up.   FULL BALL BEARINGS Just because the SCX24™ is smaller in size doesn't mean the features need to follow suit. No bushings found here, instead the drivetrain is freely spinning on sealed cartridge bearings throughout the entire vehicle.   AXIAL AS-1 SERVO Mounted just above the front axle is the Axial AS-1 servo, with a servo saver that allows for steering accuracy, while also providing protection for the servo gears in the event of a bind or impact.   Specifications Color Variant: Green

    1 in stock

    $200.46

  • BOOF RC Aluminum Front and Rear Axle Housing- SCX24

    BOOF RC Aluminum Front and Rear Axle Housing- SCX24

    5 in stock

    BOOF RC Aluminum Front and Rear Axle Housing- SCX24 90081

    5 in stock

    $192.44

  • Furitek SCX24 Komodo Ultimate Plus Brushless Conversion Kit (2204 Motor, Aluminum Motor Mount, Spur & Pinion Gear) Furitek SCX24 Komodo Ultimate Plus Brushless Conversion Kit (2204 Motor, Aluminum Motor Mount, Spur & Pinion Gear)

    Furitek SCX24 Komodo Ultimate Plus Brushless Conversion Kit (2204 Motor, Aluminum Motor Mount, Spur & Pinion Gear)

    3 in stock

    Axial SCX24 drivers looking to add performance, reliability, and increased efficiency to their crawler no longer need to look far to meet those requirements. The Furitek Brushless Motor conversion kit provides you with the necessary components to take your SCX24 (with compatible brushless ESC) to a whole new level of performance.The Komodo brushless 2204 1400kV motor features windings that are built with high quality copper wiring, thin stator laminations, and are precision balanced. These features together deliver high efficiency levels, that is incredibly reliable at all RPM levels. Included with the conversion kit is a aluminum motor mount which supports 2204 outrunner motors, or 2030, 2040, and 2345 inrunner type motors, a 12T brass pinion with 3mm bore, and an aluminum CNC 32T 0.5 Mod spur gear - which is a complete package that can be dropped into your vehicle when paired with a proper brushless ESC.Motor Specifications:kV: 1400No load current: 0.5AWatts: 180Input Voltage: 7.4-14.8V (2-4s LiPo)Resistance: 0.24ohmMax Current: 15ASlots & Pole Count: 12s, 14pMotor Dimensions: 28mm diameter, 19mm height Stator Size: 2204Weight: 29.5g COMPATIBILITY: Axial SCX24

    3 in stock

    $112.25

  • Samix SCX24 Aluminum & Brass 1.0" Beadlock Wheel Set w/Scale Hubs (Silver) (4) Samix SCX24 Aluminum & Brass 1.0" Beadlock Wheel Set w/Scale Hubs (Silver) (4)

    Samix SCX24 Aluminum & Brass 1.0" Beadlock Wheel Set w/Scale Hubs (Silver) (4)

    3 in stock

    The Samix SCX24 Aluminum & Brass 1.0" Beadlock Wheel Set with Scale Hubs is a great way to lower the center of gravity on your micro rig and add an extra touch of detail. The three piece design makes tire mounting easy, and the 7-spoke pattern offers a custom look. Plus, the screw on scale hubs cover up the wheel nuts for improved realism. Package includes four wheels, four wheel nuts and hardware.Features:  Aluminum wheel set with brass rings adds 82 grams  Lower center of gravity for improved performance Screw on scale hubs for improved realism Precision machined  Brass outer ring Fit all tire brands Silver finish Compatible with Samix locking hubs (SAMSCX24-6669LH)   COMPATIBILITY: Axial SCX24

    3 in stock

    $104.23

  • Last stock! Samix SCX24 Aluminum & Brass 1.0" Beadlock Wheel Set w/Scale Hubs (Black) (4) Samix SCX24 Aluminum & Brass 1.0" Beadlock Wheel Set w/Scale Hubs (Black) (4)

    Samix SCX24 Aluminum & Brass 1.0" Beadlock Wheel Set w/Scale Hubs (Black) (4)

    1 in stock

    The Samix SCX24 Aluminum & Brass 1.0" Beadlock Wheel Set with Scale Hubs is a great way to lower the center of gravity on your micro rig and add an extra touch of detail. The three piece design makes tire mounting easy, and the 7-spoke pattern offers a custom look. Plus, the screw on scale hubs cover up the wheel nuts for improved realism. Package includes four wheels, four wheel nuts and hardware.Features: Aluminum wheel set with brass rings adds 82 grams Lower center of gravity for improved performanceScrew on scale hubs for improved realismPrecision machined Brass outer ringFit all tire brandsBlack coating to help prevent corrosionCompatible with Samix locking hubs (SAMSCX24-6669LH)   COMPATIBILITY: Axial SCX24

    1 in stock

    $104.23

  • Furitek Raptor SCX24 Aluminum Frame Kit Furitek Raptor SCX24 Aluminum Frame Kit

    Furitek Raptor SCX24 Aluminum Frame Kit

    3 in stock

    The Furitek Axial SCX24 Raptor Aluminum Frame Kit adds performance and unique style to your ride! The optional Raptor chassis kit was designed around the Furitek Komodo Brushless Motor, or Furitek Godzilla Motor system. Made with CNC aluminum, these frames come in four different colors to best match your personal style preference.Features: Precision fit for the Axial SCX24 Manufactured with CNC Aluminum Designed for Komodo or Godzilla Brushless Motors COMPATIBILITY: Axial SCX24

    3 in stock

    $96.21

  • Last stock! Samix SCX24 Aluminum & Brass 1.0" Beadlock Wheel Set (Silver) (4) Samix SCX24 Aluminum & Brass 1.0" Beadlock Wheel Set (Silver) (4)

    Samix SCX24 Aluminum & Brass 1.0" Beadlock Wheel Set (Silver) (4)

    1 in stock

    The Samix SCX24 Aluminum & Brass 1.0" Beadlock Wheel Set is a great way to lower the center of gravity on your micro rig. The three piece design makes tire mounting easy, and the 7-spoke pattern offers a custom look. Package includes four wheels and hardware.Features:  Aluminum wheel set with brass rings adds 80 grams  Lower center of gravity for improved performance Precision machined  Brass outer ring Fit all tire brands Silver finish Compatible with Samix locking hubs (SAMSCX24-6669LH)   COMPATIBILITY: Axial SCX24

    1 in stock

    $84.99

  • Hot Racing Axial SCX24 Aluminum Front Axle Case

    Hot Racing Axial SCX24 Aluminum Front Axle Case

    3 in stock

    The Hot Racing Axial SCX24 Aluminum Front Axle Case is a machined aluminum front axle housing upgrade for the Axial SCX 24 RTR vehicles. Package includes axle case, worm gear cover and hardware.  Features: CNC machined billet aluminum axle housing and tubes, anodized black CNC machined billet aluminum Worm Gear cover, anodized black Replaces factory plastic axle case housing and diff cover Direct fit hop up requires no vehicle modification for use Compatible with Axial SCX24 Replacement for AXI31609 Specifications: Weight: 12g Length end-to-end: 65.7mm Includes: (1) aluminum axle housing (1) aluminum Worm Gear cover COMPATIBILITY: Axial SCX24

    3 in stock

    $78.57

  • Last stock! Hot Racing SCX24 Aluminum Rock Racer Conversion Chassis HRASXTF14RR01

    Hot Racing SCX24 Aluminum Rock Racer Conversion Chassis HRASXTF14RR01

    2 in stock

    This is a black aluminum Rock Racer conversion chassis for Axial SCX24 vehicles by Hot Racing. Features: CNC machined aluminum construction. Anodized black with secondary-processed machined beveled edges for outstanding looks. Numerous shock and link mounting locations. Specs: Frame plate thickness: 1.5mm Length: 5.47 in. (139mm) Width: 1.5 in. (38mm) Height: 2.0 in. (50mm) Includes: Left and right chassis frame plates One roof plate Four cross brace tubes Hardware kit with screws Requires: Installation, may require some customization.

    2 in stock

    $78.39

  • Yeah Racing Axial SCX24 C10 Aluminum Suspension Links (Black) (133.7mm Wheelbase) Yeah Racing Axial SCX24 C10 Aluminum Suspension Links (Black) (133.7mm Wheelbase)

    Yeah Racing Axial SCX24 C10 Aluminum Suspension Links (Black) (133.7mm Wheelbase)

    4 in stock

    Yeah Racing Axial SCX24 C10 Aluminum Suspension links. These optional links are made from solid aluminum and are non adjustable. Being non adjustable, you will never have to worry about a link loosening while on the trail. Package includes one complete link set, sixteen pivot balls and thirty-two O-rings intended for the Axial SCX24 when equipped with the C10 body.Features:  Perfect fit for the Axial SCX24 equipped with the C10 body (Will also work with Jeep body but will extend wheelbase slightly) Solid aluminum links Brass pivot balls included COMPATIBILITY: Axial SCX24

    4 in stock

    $73.76

  • Last stock! Yeah Racing Axial SCX24 Front & Rear Adjustable Shock Mounts w/ESC Plate (Black) Yeah Racing Axial SCX24 Front & Rear Adjustable Shock Mounts w/ESC Plate (Black)

    Yeah Racing Axial SCX24 Front & Rear Adjustable Shock Mounts w/ESC Plate (Black)

    1 in stock

    Yeah Racing Axial SCX24 Front and Rear Adjustable Shock Mounts with ESC Plate. These optional shock mounts, paired with the ESC mount, will allow for a stiffer chassis to increase suspension efficiency. Package includes four shock mounts, one ESC mount with brace and hardware intended for the Axial SCX24Features: Perfect fit for the axial SCX24 Made from aluminum for a strong finish Allows for a stiffer chassis allowing for increased suspension efficiency

    1 in stock

    $65.74

  • BOOF RC Aluminum Rock Racer Conversion Chassis- SCX24

    BOOF RC Aluminum Rock Racer Conversion Chassis- SCX24

    10 in stock

    Axial SCX24 90081 C10 CNC Aluminum Alloy frame shell

    10 in stock

    $80.18$64.14

  • BOOF RC SCX24 Beadlock Wheels and Tires Set 50mm, width 20mm - Set of 4

    BOOF RC SCX24 Beadlock Wheels and Tires Set 50mm, width 20mm - Set of 4

    3 in stock

    SCX24 Wheels+tires set 50mm, width 20mm 4pcs COMPATIBILITY: SCX24

    3 in stock

    $64.14

  • BOOF RC Aluminum Alloy Chassis Frame Rock Racer Conversion for Axial SCX24 Deadbolt 1 set BOOF RC Aluminum Alloy Chassis Frame Rock Racer Conversion for Axial SCX24 Deadbolt 1 set

    BOOF RC Aluminum Alloy Chassis Frame Rock Racer Conversion for Axial SCX24 Deadbolt 1 set

    10 in stock

    Aluminum Alloy Chassis Frame Rock Racer Conversion for Axial SCX24 Deadbolt 1 set

    10 in stock

    $80.18$64.14

  • Last stock! BOOF RC CNC Brass Beadlock Wheels 4pcs/set for Axial SCX24 31mm, Height 13mm Black Gold BOOF RC CNC Brass Beadlock Wheels 4pcs/set for Axial SCX24 31mm, Height 13mm Black Gold

    BOOF RC CNC Brass Beadlock Wheels 4pcs/set for Axial SCX24 31mm, Height 13mm Black Gold

    1 in stock

    Axial SCX24 4mm Brass Wheel Counterweight with Wide Axles 4pcs/set

    1 in stock

    $88.19$64.14

  • Yeah Racing SCX24 Jeep/C10 Steel Center Driveshafts Yeah Racing SCX24 Jeep/C10 Steel Center Driveshafts

    Yeah Racing SCX24 Jeep/C10 Steel Center Driveshafts

    7 in stock

    Yeah Racing SCX24 Jeep Steel Center Driveshafts are a heavy duty upgrade for your C10 or Jeep trucks! These driveshafts improve durability and and lifespan compared to the stock plastic parts.  Features: Fits Axial SCX24 Jeep HD Steel Includes: (2) Center Shafts  COMPATIBILITY: Axial SCX24

    7 in stock

    $64.14

  • Samix SCX24 Aluminum 1.0" Wheel Set (Black) (4) Samix SCX24 Aluminum 1.0" Wheel Set (Black) (4)

    Samix SCX24 Aluminum 1.0" Wheel Set (Black) (4)

    3 in stock

    The Samix SCX24 Aluminum 1.0" Wheel Set is a great way to add some bling and some weight to your SCX24. Made from CNC machined aluminum these 1 inch wheels feature chamfered edges and work with standard SCX24 tires. Package includes four black wheels.    COMPATIBILITY: Axial SCX24

    3 in stock

    $64.14

  • Last stock! Yeah Racing SCX24 Deadbolt Steel Center Driveshafts Yeah Racing SCX24 Deadbolt Steel Center Driveshafts

    Yeah Racing SCX24 Deadbolt Steel Center Driveshafts

    1 in stock

    Yeah Racing SCX24 Deadbolt Steel Center Driveshafts are a heavy duty upgrade for your mini Deadbolt! These driveshafts improve durability and and lifespan compared to the stock plastic parts.  Features: Fits Axial SCX24 Deadbolt HD Steel Includes: (2) Center Shafts  COMPATIBILITY: Axial SCX24

    1 in stock

    $61.73

  • Boof RC Aluminum Alloy Rear Axle Housing Black with Cover 1pc for Axial SCX24/AX24 Boof RC Aluminum Alloy Rear Axle Housing Black with Cover 1pc for Axial SCX24/AX24

    Boof RC Aluminum Alloy Rear Axle Housing Black with Cover 1pc for Axial SCX24/AX24

    9 in stock

    Axial SCX24 Aluminum Alloy Rear Axle Housing Black with Cover 1pc

    9 in stock

    $78.57$59.33

  • BOOF RC SCX24 4 PIECE TOOL SET HSS Honeycomb Wrench Tool Hex 0.05''/1.3/1.5mm, Box 4.0mm BOOF RC SCX24 4 PIECE TOOL SET HSS Honeycomb Wrench Tool Hex 0.05''/1.3/1.5mm, Box 4.0mm

    BOOF RC SCX24 4 PIECE TOOL SET HSS Honeycomb Wrench Tool Hex 0.05''/1.3/1.5mm, Box 4.0mm

    6 in stock

    SCX24 4 PIECE TOOL SET HSS  Honeycomb Wrench Tool Hex 0.05''/1.3/1.5mm, Box 4.0mm  

    6 in stock

    $56.12

  • Samix SCX24 Aluminum 4-Link Servo Mount w/39mm Links (EcoPower/Emax) Samix SCX24 Aluminum 4-Link Servo Mount w/39mm Links (EcoPower/Emax)

    Samix SCX24 Aluminum 4-Link Servo Mount w/39mm Links (EcoPower/Emax)

    3 in stock

    This is the Samix SCX24 Brass Servo Mount and 29.5mm Aluminum Links designed to fit the Ecopower and Emax servo. This servo mount features an updated mount to enable you to use the upgraded Ecopower and Emax servos for additional steering authority in an easy bolt on application. Additionally, this mount converts the front suspension to a true 4-link setup providing precision suspension movements and helping to remove any slop in the steering. Constructed from brass the servo mount also adds 7g of weight, increasing the forward weight bias and lowering the center of gravity improving the SCX24's crawling performance. NOTE: The 29.5mm link setup is intended for the short Y-link suspension used on the Axial Deadbolt and Betty Features: Direct fit for EcoPower 827 and Emax ES08 servos without any modifications Adds 7 grams of weight to the front axle CNC machined billet aluminum, available in multiple colors More durable than stock plastic mount Will not flex like stock mount when high torque servo is used Creates a stiffer upper linkage mount Direct replacement upgrade for stock plastic Axial servo mount, no modification required (Not compatible with factory servo) Includes: (1) Brass servo mount for EcoPower 827 and Emax ES08 servos (2) 29.5mm Links Mounting Hardware COMPATIBILITY: Axial SCX24

    3 in stock

    $56.12

  • Last stock! Samix SCX24 Brass Servo Mount & Aluminum 4-Link w/29.5mm Links (EcoPower/Emax) (7g) Samix SCX24 Brass Servo Mount & Aluminum 4-Link w/29.5mm Links (EcoPower/Emax) (7g)

    Samix SCX24 Brass Servo Mount & Aluminum 4-Link w/29.5mm Links (EcoPower/Emax) (7g)

    2 in stock

    This is the Samix SCX24 Brass Servo Mount and 29.5mm Aluminum Links designed to fit the Ecopower and Emax servo. This servo mount features an updated mount to enable you to use the upgraded Ecopower and Emax servos for additional steering authority in an easy bolt on application. Additionally, this mount converts the front suspension to a true 4-link setup providing precision suspension movements and helping to remove any slop in the steering. Constructed from brass the servo mount also adds 7g of weight, increasing the forward weight bias and lowering the center of gravity improving the SCX24's crawling performance. NOTE: The 29.5mm link setup is intended for the short Y-link suspension used on the Axial Deadbolt and Betty Features: Direct fit for EcoPower 827 and Emax ES08 servos without any modifications Adds 7 grams of weight to the front axle CNC machined billet aluminum, available in multiple colors More durable than stock plastic mount Will not flex like stock mount when high torque servo is used Creates a stiffer upper linkage mount Direct replacement upgrade for stock plastic Axial servo mount, no modification required (Not compatible with factory servo) Includes: (1) Brass servo mount for EcoPower 827 and Emax ES08 servos (2) 29.5mm Links Mounting Hardware COMPATIBILITY: Axial SCX24

    2 in stock

    $56.12

  • Boof RC Axial SCX24 Aluminum Alloy Front Axle Housing Black with Cover 1pc Boof RC Axial SCX24 Aluminum Alloy Front Axle Housing Black with Cover 1pc

    Boof RC Axial SCX24 Aluminum Alloy Front Axle Housing Black with Cover 1pc

    11 in stock

     Axial SCX24 Aluminum Alloy Front Axle Housing Black with Cover 1pc

    11 in stock

    $56.12

  • Samix SCX24 Aluminum Link Set (7) (133.7mm) Samix SCX24 Aluminum Link Set (7) (133.7mm)

    Samix SCX24 Aluminum Link Set (7) (133.7mm)

    4 in stock

    Samix SCX24 Aluminum Link Set is an optional aluminum link set intended for the 133.7mm wheelbase SCX24 chassis. Using high quality aluminum link bodies and brass pivot balls this set not only increases durability but can decrease axle wrap under extreme conditions. These links also feature laser etched length specifications making installation easy.Features: Replaces stock plastic links Made from high quality aluminum Brass pivot balls Increases durability and performance   Includes: (2) 50mm Links (2) 51mm Links (2) 58.5mm Links (1) Y-Link COMPATIBILITY: Axial SCX24

    4 in stock

    $54.51

  • Last stock! Hot Racing Axial SCX24 Aluminum Front & Rear Adjustable Shock Towers (Black) Hot Racing Axial SCX24 Aluminum Front & Rear Adjustable Shock Towers (Black)

    Hot Racing Axial SCX24 Aluminum Front & Rear Adjustable Shock Towers (Black)

    1 in stock

    Hot Racing Axial SCX24 Aluminum Front & Rear Adjustable Shock Towers aluminum front and rear shock towers offer a variety of different shock mounting locations to accommodate a variety of suspension setups, so you can get your SCX24 setup to conquer more technical terrain. Features: Aluminum construction Anodized black in color Replaces AXI31614 Axial factory plastic parts shock hoops Screw are compatible with stock Axial 1.25mm (0.05) allen key Many different shock mounting locations to accommodate a variety of suspension setups Includes: (2) black front shock tower support (2) black rear shock tower support (4) 6mm Cap Head M1.4 (8) 5mm Cap Head M1.4

    1 in stock

    $54.34

  • Hot Racing Axial SCX24 Aluminum LWB Link Set Hot Racing Axial SCX24 Aluminum LWB Link Set

    Hot Racing Axial SCX24 Aluminum LWB Link Set

    4 in stock

    The Hot Racing Axial SCX24 Aluminum LWB Link Set is an optional upgrade aluminum link set for 5.26" (133.7mm) wheelbase Axial SCX24 vehicles. These quality aluminum pieces are an ideal way to add durability and improve performance by helping to reduce axle wrap and axle steer. NOTE: Not compatible with SCX24 Deadbolt models. Only compatible with SCX24 models equipped with the AXI204000 link kit as stock equipment. Features: 6061 CNC T6 Black anodized aluminum link for ultimate durability Replaces stock plastic links EZ Replacement chrome Ball Replaces AXI204000 Includes: (2) front lower links (1) upper Y-links (2) rear lower links (2) rear upper 4-links Mount hardware

    4 in stock

    $54.34

  • BOOF RC Axial SCX24 Aluminum Alloy Front and Rear Axle Housing Black with Cover 1set

    BOOF RC Axial SCX24 Aluminum Alloy Front and Rear Axle Housing Black with Cover 1set

    9 in stock

    Axial SCX24 Aluminum Alloy Front and Rear Axle Housing Black with Cover 1set C10

    9 in stock

    $52.91

  • BOOF RC Axial SCX24 Aluminum Alloy Front and Rear Axle Housing Black with Cover 1set BOOF RC Axial SCX24 Aluminum Alloy Front and Rear Axle Housing Black with Cover 1set

    BOOF RC Axial SCX24 Aluminum Alloy Front and Rear Axle Housing Black with Cover 1set

    9 in stock

    Axial SCX24 Aluminum Alloy Front and Rear Axle Housing Black with Cover 1set

    9 in stock

    $52.91

  • Last stock! Yeah Racing SCX24 Deadbolt Steel Link Set (133.5mm Wheelbase) Yeah Racing SCX24 Deadbolt Steel Link Set (133.5mm Wheelbase)

    Yeah Racing SCX24 Deadbolt Steel Link Set (133.5mm Wheelbase)

    1 in stock

    The Yeah Racing SCX24 Deadbolt Steel Link Set is a great way to increase suspension precision. Compatible with any 133.5mm wheelbase SCX24, these links will improve suspension stability and let all the dampening happen with the shocks!Features:Fits Axial SCX24 Deadbolt 133.5mm Wheelbase Steel linksPlastic rod endsBrass pivot ballsIncludes:(6) Links (12) Rod ends (12) Pivot balls COMPATIBILITY: Axial SCX24

    1 in stock

    $52.11

  • Last stock! Samix SCX24 Brass Heavy Steering Knuckle

    Samix SCX24 Brass Heavy Steering Knuckle

    2 in stock

    The Samix SCX24 Brass Heavy Steering Knuckle is a great way to add forward weight bias to your SCX24 based rig. These brass knuckles are machined from brass, and feature a slick black coating with gold chamfered edges that give the axle a custom look. They weigh 9 grams each to help improve the center of gravity, and are marked with L and R to simplify installation. Package includes two knuckles and four king pin bushings.  Features: Brass knuckle add 9g per side Better center or gravity and forward weight bias for climbing Better durability and rigidity over the factory parts Made of high quality brass and etched with L and R for ease of installation Will work with factory SCX24 parts and the rest of samix brass upgrades Black coating to help prevent corrosion Combine with: Aluminum brake rotor & caliper (SAMSCX24-6412) Brass wheel weights 9g (SAMSCX24-4078) All SAMIX wheels     COMPATIBILITY: Axial SCX24

    2 in stock

    $48.10

MINI CRAWLERS

Login

Forgot your password?

Don't have an account yet?
Create account