Vehicle: XBility XBOne 1/28 RWD Chassis The XBility RC XBOne Brass Chassis Weight is a precision tuning component designed to fine-tune weight distribution and improve on-track stability for the XBOne 1/28 Performance RWD chassis. Adding low-mounted brass mass helps lower the center of gravity, increasing rear traction and overall consistency during aggressive driving. Ideal for racers looking to dial in balance, rotation, and grip without altering suspension geometry. ⚙️ Features Solid brass construction for added low-mounted weight Improves stability and rear traction Helps lower center of gravity Ideal for fine chassis balance tuning Direct fit for XBility XBOne chassis 📦 Includes (1) Brass Chassis Weight  

Read more less

Vehicle: XBility Nova GT The XBility Nova GT Bumper Weights Set is a precision tuning option designed to fine-tune front weight bias and steering response on the Nova GT platform. These optional weights install directly into the Nova GT bumper and allow racers to make small, meaningful balance adjustments without changing suspension geometry. Available in 1g or 2g, these weights are ideal for dialing in steering feel, improving front bite, and adapting to changing track conditions. ⚙️ Features Optional front bumper tuning weights for Nova GT Available in 1g or 2g configurations Allows precise front weight bias adjustment Improves steering feel and front traction Ideal for fine tuning across different track conditions Compatible with all XBility Nova GT bumpers 📦 Includes (2) Nova GT Bumper Weights(Weight option selected at purchase: 1g or 2g)  

Read more less

Vehicle: XBility XBOne 1/28 RWD Chassis The XBility RC XBOne Aluminum Knuckle Set is a precision-machined replacement upgrade for the XBOne 1/28 Performance RWD chassis. Designed to replace the stock components, these aluminum knuckles deliver improved durability, consistent steering geometry, and a more precise front-end feel on track. Perfect for racers looking to increase reliability and maintain tight tolerances during competitive racing. ⚙️ Features CNC-machined aluminum construction Improved strength and durability over plastic knuckles Maintains precise steering geometry Direct replacement for XBOne chassis Ideal for racing and high-performance builds 📦 Includes (1) Left Aluminum Knuckle (1) Right Aluminum Knuckle

Read more less

The XBility Nova GT Lexan Body is a lightweight, clear body shell designed specifically for the XBility XBOne / Nova GT platform. Perfect for racers and builders who want full creative control, this clear Lexan body allows you to create custom paint schemes while maintaining excellent durability and aerodynamic performance. Precision molded for an exact fit, the Nova GT body protects key components without adding unnecessary weight—making it a great choice for both competition and casual running. 🎨 Customization Ready Clear Lexan construction for custom paint designs Easy to trim, paint, and mount Ideal for racers who want a unique look on track 🏁 Performance & Fit Lightweight Lexan material for improved performance Precision molded for the XBOne chassis Maintains aerodynamic efficiency Protects internal electronics and components ✅ Features Clear Lexan body for custom paint jobs Durable and crack-resistant material Exact-fit design for XBOne / Nova GT Clean, race-inspired body profile 📦 Includes (1) XBility Nova GT / XBOne Lexan Body (Clear)

Read more less

The XBILITY One is a next-generation 1/28 performance chassis engineered for racers who demand precision, tuning freedom, and uncompromising reliability. Featuring a completely redesigned ball differential, 1/8-inspired front knuckles, advanced geometry options, and the stealth-black TORQ TCM-1003 servo, this platform sets a new standard for competitive micro-scale racing. Key Features Redesigned Ball Differential — Stronger, Smoother, Smarter Updated differential eliminates wheel fitment issues common in traditional setups New 3-point wheel mounting system for improved alignment and reliability Differential balls seat into machined pockets for consistent operation and easier maintenance Includes both 14mm and 11mm wheels (11mm includes +3mm offset) 1/8-Inspired Front Knuckles Zero axle trail design for ultra-free rolling and high cornering speed Adjustable camber and track width Multi-position roll center and camber gain tuning Caster adjustable from 0° to 3° for sharp or stable steering characteristics Advanced Front & Rear Geometry Adjustable roll center, caster, and camber gain for fine steering control Multiple rear side-link and spring seat positions to tune grip without changing springs Optional rear pivot mounts allow you to choose agile or planted handling Universal Battery Support Accepts 24mm hard case batteries and all major soft pack formats Adjustable soft-pack position for weight-balance tuning Upgraded Steering Rack Redesigned for accuracy and simplified service Eliminates lost ball ends and improves consistency over long race days Included TORQ TCM-1003 Servo A premium, all-black micro servo engineered for speed and precision. Specifications: CNC aluminum case with full blacked-out aesthetic Coreless motor with titanium gears 3.0kg torque and 0.052 sec speed at 8.4V Operating voltage: 4.8V–8.4V Stealth black signal and power wiring The clean visual profile is matched by exceptional performance on the track.   Complete Kit Includes (1) XBILITY One 1/28 Performance RWD Chassis (1) TORQ TCM-1003 Coreless Titanium Gear Micro Racing Servo (2) 11mm x 20mm CNC rear wheels with +3 offset Printed assembly & tuning manual

Read more less

Dial in the perfect suspension feel for your XBility RC XBOne 1/28 Performance RWD chassis with this Front Shock Springs Set. Featuring five precision-tuned spring rates, this kit gives racers full control over front-end balance, traction, and responsiveness on any track. About the Front Shock Springs Set Tuning Options for Any Track This spring set includes two springs of each stiffness level—from extra soft to extra hard—allowing you to tailor your front suspension for your driving style and track surface. Run softer springs for maximum front grip and smooth weight transfer, or switch to stiffer rates for razor-sharp steering response and reduced chassis roll. Whether you're chasing more rotation, stability, or consistency, these springs make it easy to extract the exact handling characteristics your XBOne chassis needs. Features Five front spring rates for precision suspension tuning Easily adapt handling to any track condition Enhances steering feel, grip balance, and responsiveness Engineered for consistency and durability Color-coded for fast identification Effects of Spring Rate Changes Softer Springs Increased chassis roll Increased traction Better in bumpy conditions More likely to bottom out Stiffer Springs Decreased chassis roll Decreased traction Increased responsiveness Includes (2) Red – Extra Hard (2) Yellow – Hard (2) Medium – Stock Rate (2) Green – Extra Soft (2) Blue – Soft

Read more less

Fine-tune your XBility RC XBOne chassis with this Side Springs Set, engineered to deliver precision handling adjustments for competitive 1/28 racing. With five spring rates included, this set gives you full control over roll stiffness, cornering balance, and track-specific performance. About the Side Springs Set Precision Tuning for Performance The XBility XBOne Side Springs Set includes five pairs of color-coded springs, allowing racers to tailor suspension behavior for any surface or driving style. From maximum traction to high-response stability, each spring rate provides a distinct tuning effect that makes dialing in your chassis quick and repeatable. Easy to install and essential for competitive setup work, these side springs help optimize grip, rotation, and chassis balance—giving you the confidence to push harder every lap. Features Five spring rates for precision suspension customization Improves roll control and cornering stability Quick installation for fast trackside tuning Enhances grip, balance, and overall chassis performance Color-coded for easy identification Spring Rate Characteristics Softer Springs Increased chassis roll Increased traction Better in bumpy conditions More likely to bottom out Stiffer Springs Reduced chassis roll Decreased traction Increased responsiveness Includes (2) Extra Hard Side Springs – Red (2) Hard Side Springs – Yellow (2) Medium Side Springs – Stock rate (2) Extra Soft Side Springs – Green (2) Soft Side Springs – Blue

Read more less

Overview:Upgrade your Mini-Z or Xbility One platform with the PN Racing Machine Cut Nylon 14x20mm Flanged Rear Wheels. Engineered from a brand-new, high-strength nylon fiberglass formula, these wheels deliver the perfect balance of durability, precision, and handling performance. The machine-cut construction ensures perfect roundness and balance, helping you achieve smoother cornering and reduced tire deformation under load. Features: Offset: R14 Material: Super strong black nylon fiberglass — acetone-safe and highly durable Width: 14 mm Outer flange lip diameter: 21.5 mm Full machine-cut construction for maximum precision and balance Helps reduce tire movement under load Stiffens sidewall for improved stability and reduced traction roll Designed for XBILITY One rear wheel fitment Includes: (2) PN Racing Machine Cut Nylon 14x20mm Flanged Rear Wheels (R14 Offset)

Read more less

Upgrade your drivetrain precision with the XBility 64P 53-Tooth Spur Gear. Designed for smooth, efficient power transfer, this high-quality spur gear delivers consistent mesh and reliable performance for competitive 1/28-scale racing. Whether you're fine-tuning your gear ratio or replacing worn components, this PNWC-spec gear offers the durability and accuracy serious racers demand. Features 64 Pitch, 53-Tooth spur gear Precision-molded for consistent gear mesh Durable material for long-lasting performance PNWC-compliant design Ideal for ratio tuning and smooth drivetrain operation Includes (1) 53T 64P Spur Gear Notes General 64P gear component — vehicle-specific compatibility not provided by manufacturer Confirm fitment with your chassis or gearbox design before installation

Read more less

Upgrade your build with the XBility RC Titan Pivot Balls — precision-machined 4mm titanium balls designed for durability, smooth suspension movement, and long-lasting performance. Whether you're replacing worn components or stocking up on high-quality hardware, this 5-piece set offers reliable refinement for your RC projects. Features Precision 4mm titanium pivot balls Lightweight and extremely durable Corrosion-resistant titanium construction Provides smooth articulation and consistent suspension movement Ideal for high-stress linkage and suspension applications Universal-use hardware for RC builders and tuners Includes (5) XBility 4mm Titanium Pivot Balls Notes General-use upgraded hardware — vehicle compatibility not specified by manufacturer Always check your chassis manual to confirm pivot ball size requirements

Read more less

Upgrade your steering precision with the XBility RC XBOne Aluminum Servo Horn — a durable, high-strength replacement part engineered specifically for the XBOne 1/28 Performance RWD Chassis. Designed for accuracy and reliability, this CNC-machined horn ensures consistent steering response and eliminates flex found in plastic alternatives. Features CNC-machined aluminum construction for maximum durability Improved steering precision and consistency Direct replacement for the XBOne 1/28 chassis kit Lightweight design maintains optimal front-end performance Secure clamping fit for reliable servo engagement Includes (1) XBOne Aluminum Servo Horn

Read more less